基于自组装膜的光纤错位型氨气传感器

演示了一种基于单壁碳纳米管（SWCNTs）-聚合物自组装复合膜的光纤错位型氨气传感器。通过层层自组装技术在高Q谐振器上涂覆薄膜,薄膜上存在大量的游离羧基以及较大的比表面积,这提供了光与薄膜之间的强相互作用,以及对氨气的高吸附性和选择性。光谱随氨气浓度影响的有效折射率而变化。在(10～37) ×10⁻⁶的低浓度范围内,光谱变化与氨气浓度差之比即灵敏度为13.25 pm/10⁻⁶,检测极限为3.77 ×10⁻⁶并且具有良好的线性。这项工作研制为低浓度和高选择性氨气传感器提供了一种有效的方法。     

600 kJ供能系统及其在轨道炮中的应用

 本文介绍了一种适合于电磁轨道炮使用的600 kJ供能系统。初级能源是电容器组。经过短路开关和电感储能线圈组成的转换电路，把能量输送给轨道炮。系统的主控开关和短路开关是金属接触型固体介质爆炸开关。本文推荐了一种爆炸开关闭合电阻随时间变化的经验模型。这套供能系统经过实验证明，它运行可靠、性能稳定。     

基于ZBLANⅩⅣPr,Yb频率上转换发光的三维立体显示

本文对利用ZBLANⅩⅣPr,Yb频率上转换发光的三维立体显示做了研究,探讨了其中的一些物理问题.在实验中,我们利用Yb³⁺离子敏化的方法提高Pr³⁺的上转换发光效率;通过降低能引起单频上转换发光的激光强度来提高寻址点和非寻址点在显示过程中的对比度.     

InAs/GaAs自组织量子点的DLTS谱

将DLTS用于对InAs/GaAsQD结构样品的测量,测定了QD能级发射载流子的热激活能;获得了QD能级俘获电子过程伴随有多声子发射(MPE)、QD能级存在一定程度的展宽、以及在某些特定的生长条件下,存在亚稳生长构形的实验证据.结果表明:DLTS在QD体系的研究中有其特有的功能     

Size-dependent ignition temperature of metallic compounds fabricated by self-propagating high-temperature synthesis

Considering the diffusion reaction at solid interfaces, the ignition temperature of compounds fabricated by self-propagating high-temperature synthesis (SHS) is modelled with the help of size-dependent activation energy. As reactant size decreases, ignition temperature also decreases. This is because of increased contact areas between the reactants and the lowered diffusion barrier, both of which must be calculated specifically for reactants in nanoscale. The model predictions and experimental results are consistent for some metallic compounds.     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Isolation and Structural Study on Carbohydrates from Cynanchum otophyllum and Cynanchum paniculatum

Three new carbohydrates were isolated from the acidic hydrolysis part of the ethyl acetate extract of Cynanchum otophyllum Schneid (Asclepiadaceae) and one new carbohydrate from the ethyl acetate extract of Cynanchum paniculatum Kitagawa. Their structures were determined as methyl 2,6-dideoxy-3-O-methyl-α-D-arabino-hexopyranosyl-(1 → 4)-2,6-deoxy-3-O-methyl-β-D-arabino-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α-D-arabino-hexopyranoside (1), ethyl 2,6-dideoxy-3-O-methyl-β-D-ribo-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α-l-lyxo-hexopyranoside (2), met hyl 2,6-dideoxy-3-O-methyl-α-l-ribo-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-β-D-lyxo-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α-D-arabino-hexopyranoside (3), and 2,6-dideoxy-3-O-methyl-β-D-ribo-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α-d-arabino-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α -d-arabino-hexopyranose (4), respectively, by spectral methods.     

Experimental investigation on bit-rate-adaptive software synchronous optical sampling

A tunable optical rail is embedded into the cavity of a nonlinear-polarization-rotation(NPR) mode-locked fiber laser to generate a sampling pulse with different repetition frequencies and realize bit-rate-adaptive software synchronous optical sampling.Two ultrashort pulses(20.26677 and 20.22900 MHz) are derived,and a 100-MHz data signal is sampled twice with these pulses based on sum-frequency generation(SFG) in periodically poled lithium niobate(PPLN).The eye diagram is successfully recovered,and an estimated bit rate of 102.22 MHz is derived.This method is feasible for bit rates ranging from 200 MHz to 1 GHz,with <3% relative error.     

Precise absolute positioning for a single-frequency user

A new strategy to realize precise absolute positioning for a single-frequency user is presented. In the presented strategy, the receiver clock and ambiguities are removed using the satelliteand epoch-differenced (SDED) algorithm. As a further development of the SDED algorithm, a regional augmentation network is used to generate the SDED atmospheric delays at the user. The weakened mathematic property due to the epoch-differenced operation is improved by adding the generated atmospheric delays and applying the robust estimation. To test the new approach, the 24-h data at 5 Continuous Operation Reference Station (CORS) stations in Shanghai is processed. The results show a more than 96% success rate, defined as the case where three directions achieve the desired positioning accuracy of 10 cm, when the observation is longer than 20 min. The 20-min static results show that the new method can reach an accuracy of 3.42, 4.76 and 9.26 cm in the North, East and Up directions, respectively. An experiment was carried out to assess the kinematic positioning. The results show that the kinematic positioning accuracy is 4.11, 5.31 and 4.05 cm in the north-south, east-west and height directions,respectively.     

OADM环网的实验研究

研究了光分插复用器(OADM)的关键技术,重点分析了相关的实现技术,完成了利用OADM构建全光环网的实验研究,给出了重要的实验数据,包括眼图、光谱图、光信噪比、保护与恢复等,并对这些实验数据进行了分析,为光传送网的设计与构建提供了重要的参考依据.