链间耦合对聚合物中双激子态反向极化的影响

从紧束缚模型出发，研究了链间相互作用对双激子态反向极化的影响.结果发现：加链间耦合后，双激子态仍主要局域在一条链中.当简并破缺较小时，反向极化程度随耦合强度的增加大幅提高；当简并破缺较大时，反向极化程度随耦合强度的增加基本不变. 关键词： 反向极化 双激子态 链间耦合     

Sound velocities of compressed Fe3C from simultaneous synchrotron X‐ray diffraction and nuclear resonant scattering measurements

The applications of nuclear resonant scattering in laser‐heated diamond anvil cells have provided an important probe for the magnetic and vibrational properties of ⁵⁷Fe‐bearing materials under high pressure and high temperature. Synchrotron X‐ray diffraction is one of the most powerful tools for studying phase stability and equation of state over a wide range of pressure and temperature conditions. Recently an experimental capability has been developed for simultaneous nuclear resonant scattering and X‐ray diffraction measurements using synchrotron radiation. Here the application of this method to determine the sound velocities of compressed Fe₃C is shown. The X‐ray diffraction measurements allow detection of microscale impurities, phase transitions and chemical reactions upon compression or heating. They also provide information on sample pressure, grain size distribution and unit cell volume. By combining the Debye velocity extracted from the nuclear resonant inelastic X‐ray scattering measurements and the structure, density and elasticity data from the X‐ray diffraction measurements simultaneously obtained, more accurate sound velocity data can be derived. Our results on few‐crystal and powder samples indicate strong anisotropy in the sound velocities of Fe₃C under ambient conditions.     

光纤热极化过程的实时测试研究

通过热极化可以使中心对称的熔石英光纤中产生二阶非线性效应和线性电光效应。为了解各热极化过程参量对热极化产生的线性电光效应的影响,利用全保偏光纤马赫一曾德尔干涉仪构造了一套光纤热极化的实时线性电光效应测试系统,并利用其进行了光纤热极化全过程的监控测试。在线测试了热极化过程的一些参量,例如极化电压、极化时间、以及极化温度等对热极化光纤中产生的线性电光效应的影响。实时测试研究表明,在光纤中施加尽可能高的极化电场将可能在光纤中产生较高的线性电光效应。对侧边抛磨光纤结构的热极化器件,考虑到器件的抗强电场击穿能力,可选用3．o～4．0kV左右的极化直流电压。当施加3．0kV左右的极化电压时,热极化优化时间约为16min,最佳热极化加热温度约为190℃。     

SiH3+O(3P)反应机理的理论研究

利用abinitio方法对SiH3+O(3P)反应进行了理论研究,在MP2/6-311+G(d,p)水平上优化得到了反应途径上的反应物、中间体、过渡态和产物的几何构型,并在QCISD(T)/6-311+G(d,p)水平上进行单点能计算.计算结果表明,SiH3+O(3P)→IM1→TS3→IM2→TS8→HOSi+H2为主反应通道,其他可能存在的次要产物有HSiOH+H、H2SiO+H和HSiO+H2.HOSi、HSiO和HSiOH(cis)还可能进一步解离生成SiO.另外,计算结果对SiH4+O(3P)反应机理中存在的争议给出了可能的解释,认为Withnall等人在实验中观察到的产物HSiOH、H2SiO和SiO并不是SiH4+O(3P)反应的直接产物,而是来自副反应SiH3+O(3P).     

基于虚拟现实的动车组维修性验证系统研究与设计

针对动车组维修性验证方法不足的问题,提出了采用虚拟仿真手段对维修性进行验证的方法;结合动车组系统的特点,对基于虚拟现实的动车组维修性验证系统进行了方案设计,给出了维修性验证具体流程,研究了三维虚拟样机建模的基本方法;虚拟维修性验证系统有效提高了动车组维修性设计效率,缩短了研制周期,是一种实现动车组维修性并行优化设计的有效方法。     

A new fractional derivative involving the normalized sinc function without singular kernel

In this paper, a new fractional derivative involving the normalized sinc function without singular kernel is proposed. The Laplace transform is used to find the analytical solution of the anomalous heat-diffusion problems. The comparative results between classical and fractional-order operators are presented. The results are significant in the analysis of one-dimensional anomalous heat-transfer problems.     

RF and field measurements of the SSC-LINAC RFQ

The 53.667 MHz continuous-wave heavy ion RFQ has been designed and manufactured for the SSC-LINAC project.This four-rod RFQ accelerates ions with maximum mass to charge ratio of 7 from 3.728 keV/u to 143 keV/u.Measurements have been carried out to check the RF performance of the cavity and the quality of the electric field.The S11 of the power coupler is adjusted to better than-44 dB,and the Q0 of the cavity is 6440.The quality of the electric field is evaluated by the perturbation method.The measurement procedure and data analysis will be discussed in detail.The error due to gravity of the perturbation bead has been corrected by averaging the fields in different quadrants.As a result,the unflatness of the electric field is±2.5%,and the dipole field component distributes from 0%to 20%in different longitudinal positions,which indicates the asymmetry of the quadrupole field.The unflatness of the quadrupole field distribution represents a good agreement with the simulation results.High power RF test and beam commissioning of the RFQ are on schedule in early 2014.     

Derivation of baroclinic Ertel–Rossby invariant-based thermally-coupled vorticity equation in moist flow

For the potential vorticity （PV） invariant, there is a PV-based complete-form vorticity equation, which we use heuris- tically in the present paper to answer the following question： for the Ertel-Rossby invariant （ERI）, is there a corresponding vorticity tendency equation？ Such an ERI-based thermally-coupled vorticity equation is derived and discussed in detail in this study. From the obtained new vorticity equation, the vertical vorticity change is constrained by the vertical velocity term, the term associated with the slope of the generalized momentum surface, the term related to the horizontal vorticity change, and the baroclinic or solenoid term. It explicitly includes both the dynamical and thermodynamic factors＇ influence on the vorticity change. For the ERI itself, besides the traditional PV term, the ERI also includes the moisture factor, which is excluded in dry ERI, and the term related to the gradients of pressure, kinetic energy, and potential energy that reflects the fast-manifold property. Therefore, it is more complete to describe the fast motions off the slow manifold for severe weather than the PV term. These advantages are naturally handed on and inherited by the ERI-based thermally-coupled vorticity equation. Then the ERI-based thermally-coupled vorticity equation is further transformed and compared with the traditional vorticity equation. The main difference between the two equations is the term which describes the contribution of the solenoid term to the vertical vorticity development. In a barotropic flow, the solenoid term disappears, then the ERI-based thermally-coupled vorticity equation can regress to the traditional vorticity equation.