Anti-Inflammatory Activity and Mechanism of Isookanin,Isolated by Bioassay-Guided Fractionation from Bidens pilosa L.

Bidens pilosa L. (Asteraceae) has been used historically in traditional Asian medicine and is known to have a variety of biological effects. However, the specific active compounds responsible for the individual pharmacological effects of Bidens pilosa L. (B. pilosa) extract have not yet been made clear. This study aimed to investigate the anti-inflammatory phytochemicals obtained from B. pilosa. We isolated a flavonoids-type phytochemical, isookanin, from B. pilosa through bioassay-guided fractionation based on its capacity to inhibit inflammation. Some of isookanin’s biological properties have been reported; however, the anti-inflammatory mechanism of isookanin has not yet been studied. In the present study, we evaluated the anti-inflammatory activities of isookanin using lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. We have shown that isookanin reduces the production of proinflammatory mediators (nitric oxide, prostaglandin E₂) by inhibiting the expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) in LPS-stimulated macrophages. Isookanin also inhibited the expression of activator protein 1 (AP-1) and downregulated the LPS-induced phosphorylation of p38 mitogen-activated protein kinase (MAPK) and c-jun NH₂-terminal kinase (JNK) in the MAPK signaling pathway. Additionally, isookanin inhibited proinflammatory cytokines (tumor necrosis factor-a (TNF-α), interleukin-6 (IL-6), interleukin-8 (IL-8), and interleukin-1β (IL-1β)) in LPS-induced THP-1 cells. These results demonstrate that isookanin could be a potential therapeutic candidate for inflammatory disease.     

Synthesis of 2-Oxazolines from Ring Opening Isomerization of 3-Amido-2-Phenyl Azetidines

Chiral 2-oxazolines are valuable building blocks and famous ligands for asymmetric catalysis. The most common synthesis involves the reaction of an amino alcohol with a carboxylic acid. In this paper, an efficient synthesis of 2-oxazolines has been achieved via the stereospecific isomerization of 3-amido-2-phenyl azetidines. The reactions were studied in the presence of both Brønsted and Lewis acids, and Cu(OTf)₂ was found to be the most effective.     

Efficient Synthesis of p-Hydroxyphenyl Ethanol from Hydrogenation of Methyl p-Hydroxyphenylacetate with CNTs-promoted Cu-Zr Catalyst

Hydrogenation of methyl p-hydroxyphenylacetate has been used for the synthesis of p-hydroxyphenyl ethanol. The reaction was catalyzed by Cu_iZr_j-x%(mass fraction) carbon nanotubes(CNTs) catalysts. Incorporation of a minor amount of CNTs into Cu_iZr_j oxide can visibly increase the catalytic activity for the synthesis of p-hydroxyphenyl ethanol. The yield of p-hydroxyphenyl ethanol reaches 94.2% over a co-precipitated catalyst of Cu₃Zr₁ oxide with 11.0%CNTs. Its catalytic activity shows no obvious decrease after three cycles. This is much better than the CNT-free co-precipitated catalyst with a good yield of 81.1%, Cu₃Zr₁-0%CNTs.     

“蓝瓶子”实验再探究*

利用SPSS 25.0统计软件对“蓝瓶子”实验进行正交实验设计,通过统计学分析得出最佳实验条件。利用氧化还原传感器(ORP)对“蓝瓶子”振荡体系的电极电势变化曲线进行分析,并针对蓝色的产生和消失过程设计3组对比实验深入探究,阐明其反应原理,意在引导学生深刻理解趣味实验现象背后的微观反应本质。     

加热状态选择对近沸体系丙烯/丙烷分离能耗影响的探讨

以近沸体系丙烯/丙烷分离为例介绍了化工模拟软件Aspen Plus在化工原理精馏单元的应用,研究了加热状态选择对能耗和年总费用的影响.为了提高学生工程实践能力,探讨了泡点、露点、过冷、过热、气液混合(气化率0.5)等5种进料状态分离丙烯/丙烷对能耗和经济费用的影响,在塔板数、进料板进料温度与压力、塔顶丙烯出料纯度不变条件下,过冷进料的常规工艺流程和泡点塔顶蒸气再压缩热泵工艺流程能耗和年度总费用(TAC)最小.相比常规工艺流程,塔顶蒸气再压缩热泵精馏工艺流程泡点进料可节能65％,年费用节约56％.     

高精度镉同位素分析样品消解方法对比研究

为考察不同消解方法的优缺点以及对不同基质样品(沉积物和大米)Cd同位素组成的影响,该文采用干法灰化法、酸提取法、微波消解法和高温高压密闭消解法等消解方法对水系沉积物(GSD)进行消解处理,比较了不同消解方法对沉积物Cd同位素组成测定的影响。随后使用微波消解法和高温高压密闭消解法对大米标准物质以及实际大米样品进行了消解。结果表明：高温高压密闭消解法所获得的沉积物Cd同位素测试结果在国内外文献报道的参考值范围内,能够满足同位素测定要求。而使用干法灰化法和酸提取法消解样品时,由于存在元素损失或消解不完全,标准物质Cd元素的回收率偏低(低至72.8%),导致同位素测试结果显著偏离真实值(Δ114/110Cd值最大偏差达0.24‰)。微波消解法处理标准物质Cd元素的回收率在96.6%~98.8%范围内,且同位素测试结果与高温高压密闭消解法结果吻合良好(Δ114/110Cd≤±0.04‰),表明微波消解法可以满足沉积物Cd同位素的测定要求,能够获得准确的Cd同位素组成数据。对大米标准物质和实际大米样品进行消解,所获得的Cd同位素测试结果与上述沉积物样品结果相同(Δ114/110Cd≤±0.04‰),进一步验证了微波消解法的可靠性,证实微波消解法可用于沉积物及植物样品(大米)Cd同位素分析的快速消解。     

实时直接分析质谱分析中草药多糖

建立了一种机械力化学提取法和实时直接分析质谱(DART-MS)分析相结合的中草药多糖分析方法,同时测定了黄芪、银耳、百合、茯苓、鼓槌石斛、金钗石斛、铁皮石斛和党参8种中草药多糖。比较了机械力化学提取(MCE)法与传统方法的提取效果,并优化了MCE法的提取参数。通过体积排阻色谱分离中草药多糖,建立分子质量校准曲线,估算了多糖分子质量。利用DART-MS直接裂解多糖大分子,可瞬时获得m/z<350的碎片离子,不同的中草药多糖得到的特征性的质谱离子峰可用于多糖样品的有效区分。该方法具有简单、快速、高通量、无需预消化的特点,是直接从复杂多糖大分子中获取特征指纹图谱的有力工具。     

疏水性低共熔溶剂液液微萃取/高效液相色谱法测定豆奶中三嗪类和苯脲类除草剂

该文建立了一种简单、高效的新型疏水性低共熔溶剂液液微萃取法,用于提取和富集市售包装豆奶中的三嗪类（阿特拉津、去草净）和苯脲类（灭草隆、绿麦隆）除草剂,并结合高效液相色谱对目标分析物进行分离和测定。以六氟异丙醇为氢键供体,四丁基氯化铵为氢键受体,按照不同摩尔比制备了一系列疏水性低共熔溶剂,并对影响萃取效果的实验条件进行了优化,包括低共熔溶剂的种类及用量、氯化钠用量、涡旋时间、pH值和温度。结果表明,在最佳实验条件下,4种目标物在1.00～500.00 μg/L范围内具有良好的线性关系（r ≥ 0.998 4）,检出限和定量下限分别为0.56～0.95 μg/L和1.87～3.16 μg/L,日内和日间相对标准偏差（RSD）分别为0.28%～2.0%和2.1%～7.5%,加标回收率为86.4%～117%。该方法具有操作简单快速、萃取时间短、试剂用量少和实验成本低等优点,可用于市售包装豆奶中三嗪类和苯脲类除草剂的分析检测。     

6.1 MW, 10 kHz Side-Pumped Burst-Mode Nd:YAG Laser

We present a compact high-peak-power, high-repetition-rate burst-mode laser from a master-oscillator power amplifier (MOPA) at 1064 nm for laser-based measurement applications. The oscillator is an 808 nm pulsed laser diode side-pumped acousto-optical (A-O) Q-switched Nd:YAG laser at repetition rates ranging from 10–100 kHz, producing a pulse train with a pulse number of 2–25. The maximum output energy of the oscillator is 15.6 mJ at 10 kHz, whereas it is 1.7 mJ at 100 kHz. After twostage amplifiers, a single-pulse energy of 85.2 mJ with a pulse-width of 14.5 ns is achieved at 10 kHz, which produces a peak power of 6.1 MW. At 100 kHz, the total burst energy reaches 220 mJ with a single-pulse energy of 8.8 mJ in the pulse burst laser system.     

Analysis of Asymmetric Long-Range Surface-Plasmon Waveguide with High-Confinement Mode

We model and study the asymmetric long-range surface-plasmon waveguides using the finite-element method. We introduce two types of asymmetric structures and discuss their modal properties compared to traditional long-range surface-plasmon waveguides. Although the propagation distance is decreased, the energy-confinement capability is improved for asymmetric long-range waveguiding structures when the geometrical parameters are properly selected. Our simulation result offers guidance for tuning properties of plasmonic waveguides and providing ways for enhancing electromagnetic energy confinement in long-range surface-plasmon waveguides.