Effect of graft polymer prepared by living radical polymerisation on electro-optical properties of polymer dispersed liquid crystal

In this study, a graft polymer matrix prepared by living radical polymerisation had been incorporated into polymer dispersed liquid crystals (PDLCs). The electro-optical properties of the PDLCs were investigated. The results showed that the length and density of graft chain had a great influence on the memory effect of the PDLCs. Low-driving-voltage and weak-memory-effect PDLCs could easily be obtained with a graft polymer matrix.     

Structural and magnetic properties of pulsed laser deposited SrRuO3/CoFe2O4/La2/3Sr1/3MnO3 magnetic oxide heterostructures on SrTiO3(001) and MgO(001)

We report on the growth of all-oxide SrRuO₃/CoFe₂O₄/La_2/3Sr_1/3MnO₃ and La_2/3Sr_1/3MnO₃/CoFe₂O₄/SrRuO₃ heterostuctures on SrTiO₃(001) and MgO(001) substrates by pulsed laser deposition. Structural analyses by X-ray diffraction and transmission electron microscopy clearly indicate the preservation of epitaxial relations when the La_2/3Sr_1/3MnO₃ layer is grown first, whereas trilayers with SrRuO₃ at the bottom are more disordered. Both the substrate material and the deposition sequence strongly influence the formation of various structural defects such as interfacial dislocations and sub-grain structures, and this is clearly reflected by a reduction of the saturation magnetization in the top electrode. When the substrate material and the deposition sequence are correctly chosen, however, the magnetic moments of the La_2/3Sr_1/3MnO₃ and SrRuO₃ layers reverse independently, and the La_2/3Sr_1/3MnO₃ layer retains bulk-like magnetic properties.     

Ways of formulating wind speed in heat convection significantly influencing pavement temperature prediction

This paper investigates the influences of wind speed and of heat-convection coefficient on the temperature prediction of a slab. Numerical calculation of a slab temperature found that wind speed varies the slab temperature in a degree of 2–10 °C. More varying degrees occur at midday and in sunny day but less, at midnight and in a cloud day. These degrees also depend on the used heat-convection coefficients, which have different values in different models. Special emphases are paid to unearth the correlation between different heat convection coefficients and find the best alternative in the slab-temperature prediction.     

Synthesis and characterization of polythiophene block copolymer and fullerene derivative capable of “three‐point” complementary hydrogen bonding interactions and their application in bulk‐heterojunction solar cells

We report the synthesis and characterization of a polythiophene block copolymer (P4) selectively functionalized with diaminopyrimidine moieties and a thymine tethered fullerene derivative (F1). Self‐assembly between P4 and F1 through “three‐point” complementary hydrogen bonding is studied by ¹H NMR spectroscopy and differential scanning calorimetry. A large Stern‐Volmer constant (K_SV) of 1.2 × 10⁵ M^?1 is observed from fluorescence quenching experiments, revealing strong complexation between these two components. Solar cells employing P4 and F1 at different weight ratios as active layers are fabricated and tested; corresponding thin film morphologies are studied in detail by optical imaging and atomic force microscopy. Correlations between polymer complex structures, film morphologies, and device performance are discussed. Thermal stability of benchmark poly(3‐hexylthiophene) bulk heterojunction solar cells is found to be improved by the addition of a few weight percent of P4/F1 complexes as compatibilizers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3339–3350     

甲胺分子的紫外光解离动力学实验研究

在280—287.5 nm区域内,通过实验测定共振增强多光子电离-时间飞行质谱、碎片离子的分质量激发谱以及光强指数等对甲胺分子的光解离通道进行了研究.实验结果证实甲胺分子在单光子能量范围内存在一个电子排斥态,主要的光解离过程为甲胺分子共振吸收1个光子到达该电子排斥态后解离成中性碎片,然后是中性碎片经多光子共振电离形成碎片离子和碎片离子的进一步解离.     

具非自治微小扰动的脉冲方程三个古典解的存在性

在半直线无穷区间上,我们研究具有微小非自治扰动项的脉冲方程边值问题的古典解,应用变分方法和相应的临界点理论得到了三个古典解的存在性.     

利用自电离探测技术研究Sm原子Rydberg态光谱

采用孤立实激发与自电离探测技术相结合的方法对Sm原子偶宇称高激发态进行了系统研究.按照不同的自电离通道将所测数据进行了分类和比较,并进行了详细讨论.不仅报道了许多收敛于不同电离限的Rydberg态的能级位置和跃迁的相对强度等信息,而且还把处于同一能域内的Rydberg态和价态进行了辨识.另外,不但提供了一种有效识别不同类型的高激发态的鉴别技术,而且还对处于41800 cm^-1到43800 cm^-1能域内的Rydberg态和价态的光谱特性进行了详细分析和讨论. 关键词： 自电离探测 Rydberg态 Sm原子     

Hydrogen Bonding Character Between the Glycine and BF4-

在B3LYP/6-31+G^*水平上研究BF₄^-与甘氨酸间氢键作用特征,并在B3LYP/6-311++G^**水平上计算单点能. 对二聚物几何结构、能量、氢键成键特征进行分析. 分子中的原子拓扑分析表明氢键成键原子间存在(3,-1)关键点,电子密度和Laplacian量落在氢键范围内. 进一步对氢键形成导致H原子净电荷、偶极矩、能量及体积的改变进行系统分析.     

低频标准真空涨落的测量

采用自平衡零拍方案, 对低频段的标准量子真空涨落进行了测量. 实验确定了该系统的饱和光功率约为3.2 mW. 在10 Hz–400 kHz的频率范围内, 系统的共模抑制比平均为55 dB, 在100 Hz处高达63 dB, 对激光经典技术噪声具有很强的抑制作用. 当入射光功率为400 μ W 时, 真空涨落噪声达到11 dB. 此低频量子真空噪声探测系统可广泛应用于量子计量和量子光学等研究领域.     

具有时间分辨能力的强流电子束束剖面测量系统

 高能强流电子束的束参数测量是加速器研制过程中重要的一项测量工作,由于光学渡越辐射具有时间响应快、分辨率高等特点而被用于测量电子束的具有时间分辨能力的束剖面、发散角、能量等多个参数;通过电子束束参数的时间分辨测量则能够了解电子束产生、输运中的问题,非常有利于加速器的研究与调试。一种具有时间分辨能力的、利用光学渡越辐射进行高能强流电子束束斑测量的系统在中国工程物理研究院被建立起来,并在12 MeV LIA的电子束束斑的测量中用于电子束传输研究,该系统拍摄图像的间隔时间最小为10 ns,最小的曝光时间为3 ns,具有一次可以拍摄8幅图像的能力,并获得了12 MeV LIA约100 ns内相应的时间分辨的束斑变化情况,观察到了一些过去未观察到的现象,为加速器的研究提供了又一个新测试方法。