Optical characterization of bromo-alkoxyl-substituted copper phthalocyanine derivative thin films

A series of thin films of copper phthalocyanine derivatives with bromine and alkoxyl substituents [CuPc(OC₈H₁₇)₄Br_m, m=0,1,2,4] were prepared on single-crystal silicon substrates by spin coating. The ellipsometric spectra of the films have been studied on a rotating analyzer–polarizer type of scanning ellipsometer. The optical, dielectric constants and absorption coefficients of the films in 500–800 nm wavelength region were obtained. The results show that the complex refractive index, dielectric constants and absorption coefficient of these thin films are influenced regularly by bromine substituent on conjugated macrocycle. It was found that there are approximately linear relationships between the resonance absorption wavelengths of the films and the average number of bromine atoms substituted on the phthalocyanine ring.     

Statistical theory for hydrogen bonding fluid system of A a D d type (I): The geometrical phase transition

The influence of hydrogen bonds on the physical and chemical properties of hydrogen bonding fluid system of A _a D _d type is investigated from two viewpoints by the principle of statistical mechanics. In detail, we proposed two new ways that can be used to obtain the equilibrium size distribution of the hydrogen bonding clusters, and derived the analytical expression of a relationship between the hydrogen bonding free energy and hydrogen bonding degree. For the nonlinear hydrogen bonding systems, it is shown that the sol-gel phase transition can take place under proper conditions, which is further proven to be a kind of geometrical phase transition rather than a thermodynamic one. Moreover, several problems associated with the geometrical phase transition and liquid-solid phase transition in nonlinear hydrogen bonding systems are discussed.     

儿童的铅中毒问题──Ⅱ．彩色油墨中铅的测定

用能量色散Ｘ射线荧光分析法测定了某厂生产的４４种彩色油墨纸中的铅含量．结果发现，除５种油墨外，其它３９种彩色油墨纸中的铅含量均比对照纸中高９倍以上，其中桔黄色、桔红色树脂胶版油墨高５００倍以上，棕色树脂胶版油墨高３７９倍，深黄色和柠檬黄色树脂铅印油墨分别高１７０和１１３倍．这表明，彩色油墨印刷品可能是儿童慢性铅中毒的重要污染源．     

A combined programming and iteration algorithm for finite element analysis of three-dimensional contact problems

Comparing with two-dimensional contact problems, three-dimensional frictional contact problems are more difficult to deal with, because of the unknown slip direction of the tangential force and enormous computing time. In order to overcome these difficulties, a combined PQP (Parametric Quadratic Programming) and iteration method is derived in this paper. The iteration algorithm, which alleviates the difficulty of unknown slip direction, is used along with the PQP method to cut down computing costs. Numerical example is given to demonstrate the validity of the present algorithm. The project supported by the Machinary and Electronics Ministry of China     

类型γ射线能谱指纹的识别机理

放射源的辐射指纹能起到标识和鉴别放射性物体的作用.在涉及核弹头不可逆销毁过程的深度核裁军核查中,核弹头的辐射指纹对标识和鉴别裁减下来的核弹头将起到关键作用.预先研究辐射指纹的有关技术,如识别机理的研究,将有助于深度核裁军的核弹头核查技术发展.以实验室放射源为研究对象,探索了类型γ射线能谱指纹的同一性识别机理.类型γ射线指纹识别机理的研究,就是要找出一种合适的方法,以较高的置信度,描述两个正在进行比较的γ射线指纹是否为同一放射源的指纹.采用了谱形比较法,并用谱相似度概念来描述两个指纹的相似程度.在谱形比较思想的指导下,编制了放射源类型指纹识别软件,并通过放射源同一性的识别实验验证了软件的有效性,同时研究了谱相似度随统计涨落和测量条件,如时间、源强和本底等因素的变化情况.研究结果表明:1)用相似度概念来描述两个指纹的相似程度,回答两个待比较的γ射线能谱是否代表同一类型放射源,是切实可行的;2)该识别机理只具备识别放射源类型的能力,而对同一类型、差异甚微的放射源个体还不能识别 关键词： γ射线能谱指纹 辐射指纹 识别机理 核查技术     

基于演化博弈的武器装备研制合同定价模型研究

针对合同的动态性，提出利用基于演化博弈建立定价模型。考虑到决策群体中个体的认识误差，对所建立的定价模型进行修正，建立带偏离的定价模型并分析了偏离对均衡解的影响。最后将以上模型应用实例进行比较分析。     

聚能射流的断裂时间

从描述聚能射流失稳的一维近似方程出发，导出了聚能射流断裂时间的近似公式。这个近似公式定量显示了屈服应力、本构关系、粘度和径向收缩效应等对射流断裂时间的影响，在４个不同的特殊近似下，可以自然演化为近１０年来所发表的几个半经验解析公式，并且在合理的参数范围内，公式给出的断裂时间曲线覆盖了射流断裂时间的全部实验点。     

Electronic and electromagnetic devices for millimeter-wave beam control arrays

Device alternatives for millimeter-wave beam control arrays are examined. For the control function, a wide range of semiconductor device as well as bulk material alternatives are considered. In addition, alternatives to the traditional metal strip are considered for the passive electromagnetic array element. This work should provide a broader perspective regarding the choices available for the optimized design of new beam control arrays.