侧链型偶氮聚合物液晶在不同波长激发条件下的光致取向

合成了聚甲基丙烯酸 (6 [4 (4 氰基偶氮苯 )苯氧基 ]己酯 ) (Poly(6 [4 (4 cyanophenylazo)phenoxy]hexylmethacrylate) (PM6ABCN) ) ,采用溶液挥发法在玻璃载片上成膜 ,研究了薄膜样品在Tg 温度以下的光致取向 .用波长分别为 36 6、40 0和 436nm的偏振光照射 ,发现PM6ABCN薄膜的光致取向过程不仅依赖于光的强度 ,还依赖所使用的偏振光的波长 .在低于Tg 的温度下 ,用波长为 40 0nm ,功率为 2 0mW cm2 的光照射 10 0s可以使样品的取向达到饱和 ,而用 36 6nm的光导致的取向程度要小于 40 0nm和 436nm的光 ,因为 36 6nm的光会在稳态时产生更多数目的cis异构体     

Synthesis and properties of thermally cross-linkable main-chain azobenzene polymers containing diacetylene moieties

A series of main chain azobenzene polymers containing diacetylene moieties with different lengths of the spacer {-[CC-CH₂-O-C₆H₄-OCO-(CH₂)_m-O-C₆H₄-NN-C₆H₄-O-(CH₂)_m-OCO-C₆H₄-O-CH₂-CC]_n-, where m = 3, 6, 11} were synthesized by oxidative coupling polymerization. These polymers had molecular weights of 17,600-68,600 and polydispersity indices of 1.2-1.8 as determined by gel permeation chromatography using polystyrene as a standard. Their structures and properties were characterized and evaluated with NMR, FT-IR, X-ray diffraction (XRD), thermogravimetry (TG), differential scanning calorimetry (DSC) and nonlinear optical (NLO) analyses. All the polymers could be cross-linked at the elevated temperatures due to the polymerization reactions of the diacetylene groups in the polymer backbone, and the cross-linked polymers showed dramatically modified properties, such as thermal stability and solvent resistance. The third-order nonlinear susceptibilities of the cross-linked polymers were evaluated by means of the Z-scan technique and calculated to be 3.60 × 10⁻⁹, 2.73 × 10⁻⁹, 2.28 × 10⁻⁹ esu, respectively, whereas the un-cross-linked polymers showed no obvious NLO property.     

Density profiles of strongly interacting trapped fermi gases

We study density profiles in trapped fermionic gases, near Feshbach resonances, at all T< or =Tc and in the near Bose-Einstein condensation and unitary regimes. For the latter, we characterize and quantify the generally neglected contribution from noncondensed Cooper pairs. As a consequence of these pairs, our profiles are rather well fit to a Thomas-Fermi (TF) functional form, and equally well fit to experimental data. Our work lends support to the notion that TF fits can be used in an experimental context to obtain information about the temperature.     

Fabrication of long-period gratings in poly(methyl methacrylate-co-methyl vinyl ketone-co-benzyl methacrylate)-core polymer optical fiber by use of a mercury lamp

Polymer optical fiber (POF) with a highly photosensitive poly(methyl methacrylate-co-methyl vinyl ketone-co-benzyl methacrylate) core is fabricated. Gratings can be fabricated in the core of a POF with a low-cost mercury lamp. The part of the emission spectrum of the mercury lamp in which the cladding material exhibits photosensitivity is effectively filtered by a 1.5-mm-thick Pyrex glass to ensure that a long-period grating is formed only in the core of a POF. A long-period grating with a 3-dR resonant peak at 1568 nm is fabricated with 0.3 mW/cm2 of UV irradiation over a period of 200 s.     

Bucky-gel coated glassy carbon electrodes, for voltammetric detection of femtomolar leveled lead ions

Femtomolar (fM) leveled lead ions were electrochemically detected using a bucky-gel coated glassy carbon electrode and differential pulse anodic stripping voltammetry. The bucky-gel was composed of dithizone, ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate), and multi-walled carbon nanotubes (MWCNTs). The fabrication of the bucky-gel coated electrode was optimized. The modified electrode was characterized with voltammetry, electrochemical impedance spectroscopy, and chronoamperometry. After the accumulation of lead ions into the bucky-gel modified electrode at −1.2 V vs. saturated calomel electrode (SCE) for 5 min in a pH 4.4 sodium acetate-acetate acid buffer solution, differential pulse anodic stripping voltammograms of the accumulated lead show an anodic wave at −0.58 V. The anodic peak current is detectable for lead ions in the concentration range from 1.0 μM down to 500 fM. The detection limit is calculated to be 100 fM. The proposed method was successfully applied for the detection of lead ions in lake water.     

Photoinduced alignment of azobenzene side‐chain polymers with short spacer: Biaxial orientation and fast response

Side‐chain azobenzene‐containing liquid crystalline polymer (ALCP) of Poly(6‐[4‐(4‐cyanophenylazo)phenoxy] x‐methylene methacrylate)(Px, x is 2 or 6) was synthesized and used to study its photoinduced alignment behavior irradiated by a linearly polarized laser at room temperature. The relationships between transmittance and irradiation time as well as transmittance and various incident angles were studied in detail. The oversaturation phenomenon of P ₂ film was found to be higher than 1 mW/cm² under irradiation energy density. A model of the biaxial orientation was introduced to explain the phenomenon: it is the rigid short spacer that makes it possible for mesogen to coexist in a way of out‐of‐plane and in‐plane orientation (biaxial orientation), in which the type of photoinduced motions is a single mesogen motion in the film of P ₂ , whereas in the film of P ₆ with longer spacer, the motion is a microdomain motion. The whole domain motion restricted the out‐of‐plane orientation, which shows a slow orientation rate and all mesogens aligned within the film plane. A novel dynamic fitting was also presented to describe the orientation of P ₂ , which was discussed in terms of the fitting parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1378–1384, 2006     

Influence of subunit structure on the oligomerization state of light-harvesting complexes: A free energy calculation study

Light harvesting complexes 2 (LH2) from Rhodospirillum (Rs.) molischianum and Rhodopseudomonas (Rps.) acidophila form ring complexes out of eight or nine identical subunits, respectively. Here, we investigate computationally what factors govern the different ring sizes. Starting from the crystal structure geometries, we embed two subunits of each species into their native lipid–bilayer/water environment and investigate their dynamics by means of both equilibrium and non-equilibrium (steered) molecular dynamics simulations. For each species, by employing the umbrella sampling method, we calculate and compare the free energy profiles, as a function of the angle between the two subunits, for two representative separations of the subunits. We find that two subunits prefer to arrange at distinctly different angles, depending on the species, at about 45° for Rs. molischianum and at about 38.5° for Rps. acidophila, which is likely to be an important factor contributing to the assembly into different ring sizes. Our calculations suggest a key role of surface contacts within the transmembrane domain in constraining these angles, whereas the strongest interactions stabilizing the subunit dimers are found in the C-, and to a lesser extent, N-terminal domains. The presented computational approach provides a promising starting point to investigate the factors contributing to the assembly of protein complexes, in particular if combined with modeling of genetic variants.     

Photocatalytic degradation intrinsic kinetics of gaseous cyclohexane in a fluidized bed photocatalytic reactor

The special photocatalytic degradation intrinsic kinetics of gaseous cyclohexane were investigated in a designed fluidized bed photocatalytic reactor (FBPR). A series of photocatalytic kinetic reaction equations were developed to explore the relationship of degradation efficiency and operating variables based on photocatalytic mechanism and particle fluidization hydrodynamic characteristics. The corresponding results indicated that the initial concentration has influenced the photocatalytic degradation reaction conversion, and having a concentration inflexion point which theoretically divided the photocatalysis into a first-order apparent kinetic rate equation at low concentrations and a zero-order kinetic rate equation at high concentrations. Furthermore, these results were validated theoretically by the intrinsic kinetic models of photocatalytic degradation conversion developed according to variation of cyclohexane concentration and gas velocity. Based on the experimental results, the optimal operating gas velocity range was determined. The multi-factors synergy effect resulting from gas velocity on photocatalytic degradation efficiency was explored and proved by mass transfer, illumination transmission and adsorption models. Finally, the degradation pathways of the cyclohexane and deactivation mechanism of the photocatalyst were studied according to the intermediates degraded on TiO₂ surface, and a feasible method presented for catalyst regeneration.     

Near-field lithography on the azobenzene polymer liquid crystal films

In this article, we reported near-field research on azobenzene polymer liquid crystal films using scanning near-field optical microscopy (SNOM). Optical writing and subsequently topographic reading of the patterns with subwavelength resolution were carried out in our experiments. Nanometer scale dots and lines were successfully fabricated on the films and the smallest dot diameter is about 120 nm. The width of the line fabricated is about 250 nm. This method is also a choice for nanolithography. The mechanism of the surface deformation on the polymer films was briefly analyzed from the viewpoint of gradient force in the optical near field. The intensity distribution of the electric field near the tip aperture was numerically simulated using finite-difference time-domain (FDTD) method and the numerical simulation results were consistent with the experimental results.