Experimental Evidence for a Triboluminescent Antiperovskite Ferroelectric: Tris(trimethylammonium) catena‐Tri‐μ‐chloro‐manganate(II) Tetrachloromanganate(II)

The perovskite structure is rich in ferroelectricity. In contrast, ferroelectric antiperovskites have been scarcely confirmed experimentally since the discovery of M₃AB‐type antiperovskites in the 1930s. Ferroelectricity is now revealed in an organic–inorganic hybrid X₃AB antiperovskite structure, which exhibits a clear ferroelectric phase transition 6/mmmF6mm with a high Curie point of 480 K. The physical properties across the phase transition are obviously changed along with the symmetry requirements, providing solid experimental evidence for the ferroelectric phase transition. More interestingly, the discovered antiperovskite shows intense photoluminescence and triboluminescence properties. The confirmation of the triboluminescent ferroelectric antiperovskite will open new avenues to explore excellent optoelectronic properties in the antiperovskite family.     

Tuning the morphology of amphiphilic copolymer aggregates by compound emulsifier via emulsion–solvent evaporation

A series of poly(4-vinylpyridine)-b-poly{6-[4-(4-butyloxyphenylazo)phenoxy]hexyl methacrylate} (P4VP-b-PAzoMA) were employed to fabricate aggregates via the emulsion–solvent evaporation method. The emulsion was stabilized by compound emulsifier composed of SDS and span60. By tuning the ratio of two emulsifiers, P4VP-b-PAzoMA could self-assemble into various morphologies including porous microspheres, tremella-like aggregates, bowl-like aggregates and wrinkled microspheres. The transformation of the morphologies could be ascribed to three major aspects: the stability of emulsified chloroform droplets, the permeation of water into chloroform and the dispersity of the interior water droplets with regard to different HLB values. Besides, the morphology could even be tuned by changing the block ratio and the concentration of P4VP-b-PAzoMA, and the HLB dependent morphology changing was also proved within other block ratio or different concentration. The study uncovers a convenient and effective technique to manipulate the morphology of amphiphilic copolymer aggregates.     

Preparation of Polylactide/Poly(ether)urethane Blends with Excellent Electro-actuated Shape Memory <Emphasis Type="Italic">via</Emphasis> Incorporating Carbon Black and Carbon Nanotubes Hybrids Fillers

In this work, hybrid conductive fillers of carbon black (CB) and carbon nanotubes (CNTs) were introduced into polylactide (PLA)/thermoplastic poly(ether)urethane (TPU) blend (70/30 by weight) to tune the phase morphology and realize rapid electrically actuated shape memory effect (SME). Particularly, the dispersion of conductive fillers, the phase morphology, the electrical conductivities and the shape memory properties of the composites containing CB or CB/CNTs were comparatively investigated. The results suggested that both CB and CNTs were selectively localized in TPU phase, and induced the morphological change from the sea-island structure to the co-continuous structure. The presence of CNTs resulted in a denser CB/CNTs network, which enhanced the continuity of TPU phase. Because the formed continuous TPU phase provided stronger recovery driving force, the PLA/TPU/CB/CNTs composites showed better shape recovery properties compared with the PLA/TPU/CB composites at the same CB content. Moreover, the CB and CNTs exerted a synergistic effect on enhancing the electrical conductivities of the composites. As a result, the prepared composites exhibited excellent electrically actuated SME and the shape recovery speed was also greatly enhanced. This work demonstrated a promising strategy to achieve rapid electrically actuated SME via the addition of hybrid nanoparticles with self-networking ability in binary PLA/TPU blends over a much larger composition range.     

全自动在线固相萃取-液相色谱-高分辨质谱法测定麦卢卡蜂蜜中的特征标志物

建立了全自动在线固相萃取-液相色谱-高分辨质谱(SPE-LC-HRMS)测定麦卢卡蜂蜜中特征标志物3,5-二甲氧基苯甲酸甲酯-4-双葡萄糖糖苷(leptosperin)的方法。以Dikma Diamonsil Plus C_(18)色谱柱(150 mm×4.6 mm,5μm)为分析柱,0.1%(v/v)甲酸水溶液-乙腈为流动相进行梯度洗脱,在电喷雾负离子、目标二级离子扫描模式下进行检测,外标法定量。结果表明,在0.5~100.0 mg/L范围内该分析物的线性关系良好,相关系数为0.999 3,方法的检出限(LOD,S/N≥3)和定量限(LOQ,S/N≥10)分别为3 mg/kg和10 mg/kg。在不同蜂蜜样品中分别添加50.0、100.0、200.0 mg/kg(洋槐蜜中添加10.0、20.0、50.0 mg/kg)特征化合物标准品进行加标回收率试验,平均回收率为82.0%~95.2%,相对标准偏差为2.7%~9.7%(n=6)。利用该方法对来自新西兰12种不同品种的95个蜂巢成熟原蜜和来自4个国家50个商品化蜂蜜进行了验证。该法快速、灵敏、准确,可为解决进口新西兰麦卢卡蜂蜜的判别难题提供技术支持。     

气相色谱-串联质谱法同时测定卷烟滤嘴中15种多环芳烃

建立了气相色谱-串联质谱同时检测卷烟滤嘴中15种多环芳烃的方法。卷烟滤嘴用二氯甲烷振荡萃取后,经0.22μm有机相滤膜过滤,采用DB-5MS色谱柱(30 m×0.25 mm,0.25μm)进行分离,电子轰击源、正离子模式下以多反应监测模式进行检测,内标法进行定量。15种多环芳烃(苊烯、苊、芴、菲、蒽、荧蒽、芘、苯并[a]蒽、屈、苯并[b]荧蒽、苯并[k]荧蒽、苯并[a]芘、二苯并[a,h]蒽、苯并[g,h,i]苝和茚并[1,2,3-c,d]芘)的线性关系良好,相关系数(R~2)为0.991 4~0.999 9。15种多环芳烃在低、中、高3个添加水平下的平均回收率为81.6%~111.2%;除了芴在低添加水平时相对标准偏差为19.2%外,其他相对标准偏差均小于16%。15种多环芳烃的检出限为0.02~0.24 ng/滤嘴,定量限为0.04~0.80 ng/滤嘴。方法前处理简便,具有快速、准确、灵敏度高及重复性好的优点,适用于卷烟滤嘴中多环芳烃的分析。     

Two-dimensional vermiculite separator for lithium sulfur batteries

A lamellar vermiculite separator assembled with exfoliation vermiculites is developed for lithium sulfur batteries. The vermiculite separator can simultaneously suppress the parasitic reactions induced by polysulfide intermediate shuttle, and prevent the short circuit by potential lithium dendrite penetration with the ultrahigh Young's modulus.     

萘并双噻二唑及其衍生稠环受体在D-A型聚合物太阳能电池给体材料中的应用

聚合物太阳能电池因其质量轻、柔性、可溶液制备成大面积器件等优点受到学术界和产业界的广泛关注。目前,聚合物太阳能电池仍然处于实验室研究阶段,研究重点依然集中在器件效率以及使用寿命的进一步提高上。开发新颖高效的聚合物太阳能电池材料是持续提高电池器件效率的原动力。给体(D)-受体(A)型共轭聚合物材料具有宽的光谱吸收、可调节的能级水平、强的分子内电荷转移过程等特征,成为聚合物太阳能电池材料设计的重要策略之一。众多的给体和受体结构单元已被筛选用来构建高性能的D-A型共轭聚合物光伏材料。其中,萘并双噻二唑及其衍生稠环受体结构单元因其具有刚性的共轭平面、强的吸电子能力等特点,被广泛用于设计高性能的聚合物太阳能电池给体材料。基于此,本文综述了萘并双噻二唑及其衍生稠环受体构筑单元在发展D-A型聚合物给体材料方面的应用,并对该类材料的发展方向和前景提出了展望。     

生物可降解医用聚氨酯及其应用

生物可降解医用聚氨酯由于其优良的生物相容性、降解性、功能化修饰和力学性能可调控等优点,逐渐引起研究者的关注,尤其在药物传递和组织工程支架等方面可望具有广阔的应用前景。结合本课题组开展的工作,本文综述了生物可降解医用聚氨酯材料在结构、功能化设计及医学应用上的研究进展,并展望了其在医学材料中的发展前景。     

气相色谱–质谱法测定食用植物油中23种农药残留

建立了测定食用植物油中23种农药残留的气相色谱–质谱联用方法。采用固相萃取,以乙腈超声提取,经过PSA,C_(18)柱进行净化,用气相色谱–质谱法测定,外标法定量。23种农药在0.01~1.0 mg/L范围内与色谱峰面积线性关系良好,相关系数为0.997 3~0.999 7,方法检出限为5~15μg/kg。测定结果的相对标准偏差为2.25%~9.40%(n=6),加标回收率为78.4%~127.3%,可以满足食用植物油中多种农药残留的同时分析。采用该方法对国内市场常见的食用植物油进行检测分析,所检测的农药残留均在国家标准的限量范围内。     

基于“学习金字塔理论”的物理化学实验教学模式改革实践

介绍了东北林业大学物理化学实验课程教学中基于"学习金字塔理论"进行教学模式改革实践的情况。在实施实验教学过程中,通过增加"学生通过在线实验视频预习""学生为学生讲解实验""操作前学生小组讨论"和"操作后学生小组总结讨论"等学习环节,建立了一种有效的"以学生为中心"的实验教学模式,促进了学生综合素质和创新能力的培养,取得了良好的教学效果。