Total synthesis of (−)-Englerin A

A novel and efficient total synthesis of Englerin A is reported. The synthesis featured an intramolecular olefin metathesis ring closure reaction and a highly stereoselective oxygen bridge formation induced by an iodonium ion. This strategy can be used for the synthesis of natural products Englerin A and Englerin B and can provide flexibility in the preparation of various 9-substituted analogues of Englerin A for further structure–activity relationship studies.     

Study of Interactions and Association Thermodynamics Between Sudan Red and Sodium Dodecyl Sulfate in Microemulsions

The absorption spectrum of Sudan red III (SR) in oil solutions and a series of O/W microemulsion with surfactant sodium dodecyl sulfate (SDS) has been determined by the UV-Vis spectrophotometer. We found that an association interaction existed between the stain SR and anionic surfactant SDS in water/mixed oil/SDS microemulsions. By measuring the absorbance of Sudan red in a series of microemulsions which has different R values and using the appropriate association models to analyze the experimental data, we obtain the association constants of SR and SDS, and the values of thermodynamics functions of associationΔ_r G _m has also been calculated from the association constants.     

Determination of fatty acids in soil samples by gas chromatography with mass spectrometry coupled with headspace solid‐phase microextraction using a homemade sol–gel fiber†

Through the use of a homemade sol–gel‐derived fiber, a headspace solid‐phase microextraction technique coupled to gas chromatography with mass spectrometry was developed for the determination of fatty acids with long, even‐numbered carbon chains (C₁₂–C₂₄) in soil samples. The experimental parameters such as reaction time, temperature, and ionic strength that might affect derivatization, extraction, and desorption were investigated. Under the optimized conditions, the linearity of the method ranged from 0.1 to 100 mg/L with a correlation coefficient >0.997. The limit of detection values based on a signal‐to‐noise ratio of 3:1 were determined with the concentration from 0.39 to 39.4 μg/L. The recoveries of the method for the soil samples were from 91.15 to 108.1%. This developed method using a homemade fiber showed a higher sensitivity than that using a commercial polydimethylsiloxane fiber and was also for the analysis of real soil samples from the Paomaling geological park of China.     

Negative‐pressure‐induced collector for a self‐balance free‐flow electrophoresis device

Uneven flow in free‐flow electrophoresis (FFE) with a gravity‐induced fraction collector caused by air bubbles in outlets and/or imbalance of the surface tension of collecting tubes would result in a poor separation. To solve these issues, this work describes a novel collector for FFE. The collector is composed of a self‐balance unit, multisoft pipe flow controller, fraction collector, and vacuum pump. A negative pressure induced continuous air flow rapidly flowed through the self‐balance unit, taking the background electrolyte and samples into the fraction collector. The developed collector has the following advantages: (i) supplying a stable and harmonious hydrodynamic environment in the separation chamber for FFE separation, (ii) effectively preventing background electrolyte and sample flow‐back at the outlet of the chamber and improving the resolution, (iii) increasing the preparative scale of the separation, and (iv) simplifying the operation. In addition, the cost of the FFE device was reduced without using a multichannel peristaltic pump for sample collection. Finally, comparative FFE experiments on dyes, proteins, and cells were carried out. It is evident that the new developed collector could overcome the problems inherent in the previous gravity‐induced self‐balance collector.     

Computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous determination of six carbamate pesticides from environmental water

The computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous capture of six carbamate pesticides from environmental water are reported in this work. The quantum mechanical computational approach was employed to design the molecularly imprinted polymers with carbofuran as template. The interaction energies between the template molecule and different functional monomers in various solvents were calculated to assist in the selection of the functional monomer and porogen. The optimised molecularly imprinted polymer was subsequently used as a class‐selective sorbent in solid‐phase extraction for pre‐concentration and determination of carbamates from environmental water. The parameters influencing the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were systematically investigated to facilitate the class‐selective extraction. For the proposed method, linearity was observed over the range of 2–500 ng/mL with the correlation coefficient ranging from 0.9760 to 1.000. The limits of detection ranged from 0.2 to 1.2 ng/mL, and the limit of quantification was 4 ng/mL. These results confirm that computer‐assisted design is an effective evaluation tool for molecularly imprinted polymers synthesis, and that molecularly imprinted solid‐phase extraction can be applied to the simultaneous analysis of carbamates in environmental water.     

Biomonitoring of infant exposure to phenolic endocrine disruptors using urine expressed from disposable gel diapers

Infant exposure to endocrine disruptors (EDs) may cause adverse health effects because of their fast growth and development during this life stage. However, collecting urine from infants for exposure assessment using biological monitoring is not an easy task. For this purpose, we evaluated the feasibility of using urine expressed from disposable gel absorbent diapers (GADs) as a matrix for biomonitoring selected phenolic EDs. GADs urine was expressed with the assistance of CaCl₂ and was collected using a device fabricated in our laboratory. The analytes were extracted and concentrated using a liquid-liquid method and their hydroxyl groups were modified by dansyl chloride to enhance their chromatography and detection. Finally, the analytes were measured by high-performance liquid chromatography (HPLC) coupled with electrospray ionization (ESI) tandem mass spectrometry (MS/MS). The target chemicals were bisphenol A, triclosan, 17 α-ethynylestradiol, the natural hormone estrone, and 17 β-estradiol. The ratio of the CaCl₂ to the urine-wetted gel absorbent, variation of the inter-urination volume, and analyte deposition bias in the diaper were assessed. Analyte blank values in the diapers, the sample storage stabilities, and recoveries of the analytes were also evaluated. The results showed that 70–80 % of the urine could be expressed from the diaper with the assistance of CaCl₂ and 70.5–124 % of the spiked analytes can be recovered in the expressed urine. The limits of detections (LODs) were 0.02–0.27 ng/mL, well within the range for detection in human populations. Our pilot data suggest that infants are widely exposed to the selected EDs.     

Bimetallic amine-bridged bis(phenolate) lanthanide aryloxides and alkoxides: synthesis,characterization, and application in the ring-opening polymerization of rac-lactide and rac-β-butyrolactone

A series of neutral bimetallic lanthanide aryloxides p-C6H4[OLnL(THF)n]2 [Ln = Y(1), Yb(2), Sm(3)(n = 1) and La(4)(n = 2), L = Me2NCH2CH2N{CH2-(2-O–C6H2–tBu2-3,5)}2] and alkoxides p-C6H4CH2[OLnL(THF)]2 [Ln = Y(5), Yb(6)] supported by an amine-bridged bis(phenolate) ligand have been synthesized through one-pot reactions of Ln(C5H5)3(THF), LH2 with p-benzenediol and 1,4-benzenedimethanol, respectively. All complexes have been fully characterized by elemental analyses, single-crystal X-ray diffraction analysis, and IR and multi-nuclear NMR spectroscopy(in the cases of 1, 4 and 5). Study of their catalytic behavior revealed that, in general, all complexes are efficient initiators for the polymerization of rac-lactide(LA) and rac-β-butyrolactone(BBL), except for 3 and 4 in the case of BBL. The influence imposed by lanthanides of different ionic radii and initiating groups of different structures on the activity, controllability, and stereoselectivity of polymerization were systematically studied and compared. Highly heterotactic PLA(Pr up to 0.99) and syndiotactic PHB(Pr ≈ 0.81) with high molecular weight and narrow polydispersity formed and were automatically capped with hydroxyl functionality at both ends.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.