647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

由季戊四醇合成季戊四硫醇的新方法

以季戊四醇为原料,先合成四对甲苯磺酸季戊四醇酯,然后四对甲苯磺酸季戊四醇酯与硫氰酸钾在N,N-二甲基甲酰胺中加热反应,生成了2,3,7,8-四硫螺[4,4]壬烷,2,3,7,8-四硫螺[4,4]壬烷经四氢化铝锂还原、酸化,得到季戊四硫醇.产物结构经熔点、红外光谱、质子核磁共振谱、拉曼光谱鉴定.     

Energy transfer channels at the diffraction-anomaly in transparent gratings and applications in sensors

Diffraction anomaly corresponds to an energy re-distribution in the reflected and transmitted light beams and in different diffraction orders of a grating, which leads to sharp modulations on the transmission and reflection spectra. In gratings sitting on a transparent substrate, this portion of the energy is actually transferred to channels separated from the reflected and transmitted beams. These channels are based on multiple degenerated diffraction processes at the same wavelength as the diffraction anomaly. The spectroscopic response of these channels is sensitive to the change in the environmental refractive index and can be utilized in sensor devices.     

Fluorescent carbon nanoparticles: A low-temperature trypsin-assisted preparation and Fe sensing

In recent years, extensive researches are focused on the fluorescent carbon nanoparticles (CNPs) due to their excellent photochemical, biocompatible and water-soluble properties. However, these synthesis methods are generally suffered from tedious processes. In this paper, fluorescent carbon nanoparticles are synthesized by a facile, one-pot, low-temperature method with trypsin and dopamine as precursors. The synthesis process avoids any heating operation and organic solvent, which provides a “green” and effective preparation route. The obtained CNPs exhibit excellent water-solubility, salt-tolerance and photostability. Based on the synergistic action of the inner filter effect and static quenching mechanism, the CNPs are exploited as a “turn-off” fluorescence sensor for sensitive and selective detection of Fe³⁺ ions. The probe shows a wide linear range from 0.1 to 500 μM, with a limit of detection of 30 nM. Furthermore, the as-fabricated fluorescent sensing system is successfully applied to the analysis of Fe³⁺ in biological samples such as human urine and serum samples with satisfactory recoveries (92.8–113.3%).     

pH对毛细管电泳分离多肽的影响

设计了一个针对高年级本科生的毛细管电泳分离实验，用以研究pH对生物小分子多肽分离的影响。5种多肽包括Bradykinin、[Hyp3]-bradykinin、Angiotensin I、Leucine Enkephalin和[Met5]-Enkaphalin，被用于毛细管电泳的分离实验。研究了毛细管电泳生物分析实验中最重要的2个因素即电渗流和样品吸附随pH的变化以及对于分离的影响。在pH=10的条件下，酸性多肽几乎没有吸附，少量的碱性多肽有吸附。在pH=6的条件下，碱性多肽具有非常强的吸附从而导致非常差的分离效果，在pH=2.3的条件下，5种多肽都能被很好地分离，由于多肽此时都带有正电荷因此几乎没有吸附。而在此pH，电渗流消失。对具有一定分析化学基础理论知识的学生而言，这是一个非常好的生物分析实验，有助于学生充分理解相关环境因素对仪器分析的重要影响。     

Synthesis and Crystal Structure of (Z)-N-(2-(diethylamino)ethyl)-7-(5-fluoro-2-oxoindolin-3-ylidene)-2-methyl-4,5,6,7-tetrahydro-1H-indole-3-carboxamide Methanol Solvate

The crystal structure of a new compound (Z)-N-(2-(diethylamino)ethyl)-7-(5- fluoro-2-oxoindolin-3-ylidene)-2-methyl-4,5,6,7-tetrahydro-1H-indole-3-carboxamidemethanol solvate (C24H29FN4O2CH4O, Mr = 456.55) has been prepared and determined by single-crystal X-ray diffraction. The crystal is of monoclinic, space group P21/c with a = 14.560(3), b = 7.3200(2), c = 22.233(4) , β = 101.78(3)°, V = 2319.7(8) 3 , Z = 4, Dc = 1.307 g/cm 3 , F(000) = 976, μ = 0.092 mm -1 , MoKa radiation (λ = 0.71073), R = 0.0604 and wR = 0.1644 for 4262 observed reflections with I > 2 (I). X-ray diffraction analysis reveals that the indole and pyrrole are almost coplanar. Intramolecular C-H···O and N-H···O hydrogen bonds together with π-π interactions are found in the structure.     

Thermal degradation kinetics and heat properties of cellulosic cigarette paper: influence of potassium carboxylate as combustion improver

Accurate determination of the thermal properties of cellulose is of particular significance in studying the mechanism of cellulosic cigarette paper combustion. This paper probes into the influence of four kinds of potassium carboxylates on the thermal degradation kinetics and the heat properties of cigarette paper through simultaneous thermogravimetric analysis (TGA) coupled with differential scanning calorimetry (DSC) measurement under air atmosphere. Reduced mass loss and mass loss rate, and increased solid residue for samples containing four potassium salts implied that potassium carboxylates may retard the formation of levoglucosan and volatiles by inhibiting the depolymerization reaction and simultaneously accelerate char formation by catalyzing the dehydration reaction. Kinetic parameters were analyzed based on three non-isothermal models available in literature. The results indicated that three modeling methods exhibit good consistency. A global activation energy range of 106–155 kJ mol^?1 was proposed for cigarette paper with potassium carboxylates. The four potassium salts studied considerably reduced the activation energy in the following descending order: potassium 1,2,3,4-butane tetracarboxylate (PBTCA) > citrate > gluconate > ascorbate. The heat properties of cigarette paper were also determined by integrating the DSC curves. The results demonstrated that both cellulose degradation and char oxidation have strong exothermic peaks. Cigarette paper samples with potassium salts have lower exothermic cellulose degradation process and higher exothermic char oxidation process, which were further confirmed by greater differences as the amounts of salt citrate or PBTCA increased.     

Ultrafast Delamination of Graphite into High-Quality Graphene Using Alternating Currents

To bridge the gap between laboratory-scale studies and commercial applications, mass production of high quality graphene is essential. A scalable exfoliation strategy towards the production of graphene sheets is presented that has excellent yield (ca. 75 %, 1–3 layers), low defect density (a C/O ratio of 21.2), great solution-processability, and outstanding electronic properties (a hole mobility of 430 cm² V⁻¹ s⁻¹). By applying alternating currents, dual exfoliation at both graphite electrodes enables a high production rate exceeding 20 g h⁻¹ in laboratory tests. As a cathode material for lithium storage, graphene-wrapped LiFePO₄ particles deliver a high capacity of 167 mAh g⁻¹ at 1 C rate after 500 cycles.