Effects of effective attractive multi-body interaction on quantum phase and transport dynamics of a strongly correlated bosonic gas across the superfluid to Mott insulator transition

We theoretically investigate quantum phases and transport dynamics of ultracold atoms trapped in an optical lattice in the presence of effective multi-body interaction.When a harmonic external potential is added,several interesting phenomena are revealed,such as the broadening and the emergence of a central insulator plateau and the phase transition between superfluid and Mott insulator phase.We also study the transport of the system which runs across the superfluid–insulator transition after ramping up the lattice,and predict a slower relaxation which is attributed to the influence of the multi-body interaction on the mass transport.     

风速测量实验的设计与探究

基于电磁理论和空气动力学的相关知识,利用磁铁、金属棒和DISLAB传感器等器件设计并制作了风速测量系统,可准确地测量2-11级范围内的风速值.该装置还可作为演示电磁感应现象的设计型实验内容,实验过程中可加深学生对电磁感应现象的理解,并提高学生对matlab软件的应用能力.     

CaMoO4：Eu3+,Bi3+,Li+红色荧光粉的共沉淀制备与表征

采用共沉淀法合成了红色荧光粉Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺及Ca_0.5MoO₄：Eu_0.25-2x³⁺, Bi_x³⁺,Li_0.25+x⁺,并采用X射线衍射(XRD)、拉曼光谱,扫描电镜(SEM)和荧光光谱(PL)测定分析了其结构形貌特征及发光性能。结果表明：制备的CaMoO₄：Eu³⁺,Bi³⁺,Li⁺红色荧光粉为白钨矿结构,颗粒尺寸约为0.5~1 μm。掺杂Bi³⁺的Ca_0.75MoO₄：Eu_0.25-x³⁺,Bi_x³⁺的相对发光强度明显高于未掺Bi³⁺的Ca_0.75MoO₄：Eu_0.25³⁺荧光粉。Bi³⁺离子的掺杂将吸收来的能量传递给激活离子Eu³⁺,起到了能量传递的作用。当Bi³⁺掺杂量为x=0.005时,在395 nm激发下,主发射峰在616 nm处的相对发光强度最大,但掺杂浓度过高时会出现浓度猝灭现象。另外,电荷补偿剂的掺入能够解决材料中因同晶取代引起的电荷不平衡的问题,以Li⁺作电荷补偿剂、Eu³⁺和 Bi³⁺共掺合成的Ca_0.5MoO₄：Eu³⁺_0.23,Bi_0.01³⁺,Li⁺_0.26红色荧光粉的发光性能强于Ca_0.75MoO₄：Eu_0.25³⁺、Ca_0.5MoO₄：Eu_0.25³⁺, Li_0.25⁺及Ca_0.75MoO₄：Eu_0.24³⁺,Bi_0.01³⁺。     

Simulation and fabrication of carbon nanotubes field emission pressure sensors

A novel field emission pressure sensor has been achieved utilizing carbon nanotubes (CNTs) as the electron source. The sensor consists of the anode sensing film fabricated by wet etching process and multi-wall carbon nanotubes (MWNTs) cathode in the micro-vacuum chamber. MWNTs on the silicon substrate were grown by thermal CVD. The prototype pressure sensor has a measured sensitivity of about 0.17-0.77 nA/Pa (101-550 KPa). The work shows the potential use of CNTs-based field-emitter in microsensors, such as accelerometers and tactile sensors.     

Diode-pumped 593.5 nm cw yellow laser by type-I CPM LBO intracavity sum-frequency-mixing

A design of LD-pumped Nd:YVO₄ laser that generates simultaneous laser action at wavelengths 1064 and 1342 nm by optimizing film design is presented. An optimized continuous-wave (cw) yellow laser at 593.5 nm in room temperature is obtained for the first time. Using type-I critical phase-matching (CPM)LBO crystal, a yellow laser at 593.5 nm is obtained by 1064 and 1342 nm intracavity sum-frequency mixing. The maximum laser output power of 85 mW is obtained when an incident pump laser of 1.8 W is used. The optical-to-optical conversion is up to 4.7%, and the power stability in 24 h is better than ±2.8%.     

Thin strain-relaxed SiGe grown by ultrahigh vacuum chemical vapor deposition

Large-scale preparation of thin strain-relaxed SiGe is achieved by combining ion implantation and ultrahigh vacuum chemical vapor deposition. The resulting materials were analyzed by double crystal X-ray diffraction, micro-Raman spectroscopy, and tapping mode atomic force microscope. Results revealed that 100-nm-thick Si_0.7Ge_0.3 layers with the diameter of 125 mm and full strain relaxation are successfully prepared by pre-modifying the Si substrates using 50 keV Ar⁺ ions. The strain relaxation is also disclosed to change with both ion species and energy. However, post-modification of SiGe by ion implantation will cause serious damage to the crystal structures, and result in the formation of poly-crystal SiGe.     

Phase transition and pitting corrosion behaviour for Mo—implanted aluminium

Molybdenum ions are implanted into aluminium with high ion flux and high dose at elevated temperatures of 200℃, 400℃ and 500℃. Due to the high temperature and high flux of vacancies and interstitial atoms, the atom diffusion and chemical effects are enhanced during the ion implantation. The effects increase with increasing ion flux and dose, so that new phase formation and phase transition emerge noticeably. X-ray diffraction analysis shows that when the aluminium is implanted with Mo ions at a low ion flux (25μA/cm²), the Al₅Mo alloy is formed. The atomic ratio of Mo/Al of the Al₅Mo phase is close to 20%. When the aluminium is implanted with Mo ions at a high ion flux (50μA/cm²), the phase transition from Al₅Mo to Al₁₂Mo appears, and the latter is dominant, which is determined to be the final phase. The ratio of Mo/Al in Al₁₂Mo is 7.7%. Rutherford backscattering spectroscopy indicates also that the Mo/Al atom ratio is ～7% to ～8% in Mo-implanted aluminium. The atomic ratios of the constituents in Al₅Mo and Al₁₂Mo are of stoichiometric composition for these alloys. The thicknesses of the Al₁₂Mo alloy layers for Mo-implanted Al with ion doses of 3×10¹⁷/cm² and 1×10¹⁸/cm² are 550nm and 2000nm, respectively. The pitting corrosion potential V_p increases obviously. It is clear that due to the formation of Al₁₂Mo alloy layer, the pitting corrosion resistance is enhanced.     

A virtual optical probe based on evanescent wave interference

A virtual probe is a novel immaterial tip based on the near-field evanescent wave interference and small aperture diffraction, which can be used in near-field high-density optical data storage, nano-lithography, near-field optical imaging and spectral detection, near-field optical manipulation of nano-scale specimen, etc. In this paper, the formation mechanism of the virtual probe is analysed, the evanescent wave interference discussed theoretically, and the sidelobe suppression by small aperture is simulated by the three-dimensional finite-difference time-domain method. The simulation results of the optical distribution of the near-field virtual probe reveal that the transmission efficiency of the virtual probe is 10²－10⁴ times higher than that of the nano-aperture metal-coated fibre probe widely used in near-field optical systems. The full width at half maximum of the peak, in other words, the size of virtual probe, is constant whatever the distance in a certain range so that the critical nano-separation control in the near-field system can be relaxed. We give an example of the application of the virtual probe in ultrahigh-density optical data storage.     

多元探测器在玫瑰扫描红外亚成像系统中的应用

玫瑰扫描红外亚成像系统是利用玫瑰扫描机构和红外单元探测器构成的一种亚成像系统。提出了一种利用多元小面阵来替代单元探测器的红外亚成像系统 ,可以提高成像系统的空间分辨率和帧频。分析了系统的原理 ,并给出了系统的构成框图。此外 ,就玫瑰扫描成像系统中应用多元探测器可能出现的问题进行了讨论 ,并提出了解决方案。结果表明 ,这种多元小面阵玫瑰扫描成像系统的成本远低于焦平面阵列探测器红外成像系统 ,在性能改善后是诸如末制导炮弹等低成本应用场合的理想红外成像系统     

江汉以濯之秋阳以曝之——纪念我的父亲钱临照

父亲生于20世纪初(1906年),到他去世(1999年),他几乎走过了整整一个世纪.这是一个中国近代科学萌芽、发展、壮大的世纪;这是一个中国从受到列强欺侮,国内战乱到解放后迎来了科学春天的世纪.父亲和老一辈的科学家们经过了艰苦卓绝的奋斗,终于在这一个世纪中为我国科教事业的高速发展奠定了坚实的基础.