聚四氟乙烯纤维辐照接枝制备弱酸性离子交换剂及其对Cu~(2+)的吸附

以聚四氟乙烯纤维为基体通过6 0 Co辐射引发与丙烯酸接枝制备弱酸性阳离子交换纤维 .产物功能基含量为 3 0 6mmol g,在pH =5时该纤维达到对Cu2 + 的最大动态吸附量为 10 7 4 8mg g.使用不同浓度HCl对饱和吸附铜的接枝纤维进行洗脱 ,证实该纤维对铜离子具有优异的解吸性能     

Investigation of Tomato Plant Defence Response to Tobacco Mosaic Virus by Determination of Methyl Salicylate with SPME-Capillary GC-MS

Headspace SPME was applied to investigation of tomato plant defence response to tobacco mosaic virus (TMV) by determination of compounds emitted from tomato plants at the extraction conditions of 25 °C and 15 min. It was found that TMV-inoculated tomato plant released large amount of methyl salicylate (MeSA) as response to TMV and MeSA concentration changed dramatically with time after inoculation. Gaseous MeSA as a signaling compound could induce in surrounding tomato plants to produce salicylic acid (SA) and synthesize and release MeSA. These results show that MeSA might be an airborne plant-signalling molecule in tomato plant response to TMV. The present method provided low detection limit of 2.0 ng L^–1 and needed little sample preparation time (15 min), so the method makes it easy to find the critical times of tomato plant response to TMV by fast determination of MeSA released from tomato plant.     

Synthesis,crystal structure and reaction of differentially ring-substituted titanocene dichlorides

Summary A new class of differentially ring-substituted titanocene dichlorides of the type CpCpTiCl₂ has been prepared by reacting CpM (M=Li, K; Cp=RC₅H₄) with CpTiCl₃ (Cp=MeOCH₂CH₂C₅H₄). The crystal structure of Cp(PhCEt₂C₅H₄)TiCl₂, the first example, has been determined by x-ray diffraction and refined to a final R factor of 0.0532 for 2304 reflections. The crystal belongs to the monoclinic space group C _2h ⁵ –P2₁/c with unit cell parameters:a 10.205(6),b 13.003(5),c 17.591(9) Å, 101.91(4)°, V=2284 ų, Z=4 and Dc=1.32 g/cm^–3. Replacement of one neomenthyl in bis(neomenthyl-cyclopentadienyl)titanium dichloride by one MeOCH₂CH₂ — raises the e.e. value from 5.8% to 11.2% in the catalytic asymmetric hydrogenation of 2-phenyl-1-butene.     

链段相容性对聚酯-聚醚多嵌段共聚物组成均一性的影响

<正> 由结晶型芳族聚酯为硬链段,无定型脂肪族聚醚为软链段的聚酯-聚醚多嵌段共聚物,是一类性能优良的热塑弹性体,本文研究链段相容性对这类聚合物组成均一性的影响,因此,合成了一系列不同链段结构的聚酯-聚醚多嵌段共聚物。 如硬链为聚对苯二甲酸乙二醇酯(PET)和丁二醇酯(PBT);软链段有聚乙二醇醚(PET)、聚丁二醇醚(PTMG)、聚二醇醚(PPG)和四氢呋喃同环氧丙烷的共聚醚二醇     

Exact electronic properties in the classically forbidden region of a metal surface

We derive exact properties of the inhomogeneous electron gas in the asymptotic classically forbidden region at a metal–vacuum interface within the framework of local effective potential energy theory. We derive a new expression for the asymptotic structure of the Kohn–Sham density functional theory (KS‐DFT) exchange‐correlation potential energy v_xc(r) in terms of the irreducible electron self‐energy. We also derive the exact asymptotic structure of the orbitals, density, the Dirac density matrix, the kinetic energy density, and KS exchange energy density. We further obtain the exact expression for the Fermi hole and demonstrate its structure in this asymptotic limit. The exchange‐correlation potential energy is derived to be v_xc(z → ∞) = ?α_KS,xc/z, and its exchange and correlation components to be v_x(z → ∞) = ?α_KS,x/z and v_c(z → ∞) = ?α_KS,c/z, respectively. The analytical expressions for the coefficients α_KS,xc and α_KS,x show them to be dependent on the bulk‐metal Wigner–Seitz radius and the barrier height at the surface. The coefficient α_KS,c = 1/4 is determined in the plasmon‐pole approximation and is independent of these metal parameters. Thus, the asymptotic structure of v_xc(z) in the vacuum region is image‐potential‐like but not the commonly accepted one of ?1/4z. Furthermore, this structure depends on the properties of the metal. Additionally, an analysis of these results via quantal density functional theory (Q‐DFT) shows that both the Pauli W_x(z → ∞) and lowest‐order correlation‐kinetic W(z → ∞) components of the exchange potential energy v_x(z → ∞), and the Coulomb W_c(z → ∞) and higher‐order correlation‐kinetic components of the correlation potential energy v_c(z → ∞), all contribute terms of O(1/z) to the structure. Hence correlations attributable to the Pauli exclusion principle, Coulomb repulsion, and correlation‐kinetic effects all contribute to the asymptotic structure of the effective potential energy at a metal surface. The relevance of the results derived to the theory of image states and to KS‐DFT is also discussed. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

On the dissolution processes of Na2I+ and Na3I2+ with the association of water molecules: mechanistic and energetic details

The sequential association energies for one through six water molecules clustering to Na(2)I(+), as well as one and two water molecules clustering to Na(3)I(2)(+), are measured. The association energies show a pairwise behavior, indicating a symmetric association of water molecules to the linear Na(2)I(+) and Na(3)I(2)(+) ions. This pairwise behavior is well reproduced by Density Functional Theory (DFT) calculations. DFT calculations also suggest that a significant separation of charge for the Na-I ion pair occurs when four or more water molecules cluster to a single sodium center. Two different solvent-separated ion pairs have been identified with the DFT calculations. Experiments also show that the dissolution processes, loss of a neutral NaI unit, occurs when six or more water molecules have been added to Na(2)I(+) cluster. However, one or two water molecules are able to detach an NaI unit from the Na(3)I(2)(+) cluster. The difference in solubility of the Na(2)I(+) and Na(3)I(2)(+) ions is due to the difference in the energies required to lose an NaI unit from these two species. The experiment also confirms that the loss of a neutral NaI unit, instead of an Na(+) ion, occurs during the dissolution processes of Na(3)I(2)(+). The microsolvation schemes proposed to explain our experimental observations are supported by DFT and phase space theory (PST) calculations.     

Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

铂锡双金属催化剂上丙烷脱氢反应研究

对比研究了Ｓｎ／Ｐｔ比为１；１，２，：１和５：１的原子簇担载于γ－Ａｌ２Ｏ３上制成的Ｐｔ＝Ｓｎ原子簇催化剂，和用ＳｎＣｌ２和Ｈ２ＰｔＣｌ６浸渍制备的相应Ｓｎ／Ｐｔ比的催化剂对丙烷脱氢生成丙烯的催化性能。     

Electronic structures of dihedral (D5h, D5d, D6h, D6d) fullerenes

By means of our proposed method for Hückel theory calculation, we have calculated the electronic structures of dihedral (D_5h, D_5d, D_6h, D_6d) fullerences, which are generated from icosahedral C₂₀, C₆₀, C₈₀, C₁₈₀, C₂₄₀ and C₅₄₀, respectively. From the calculated results of 1224 fullerence molecules, certain rules on the stability and chemical reactivity have been drawn for such types of dihedral fullerenes.     

The Pharmacophore Hypothesis of Novel Inhibitors for Aurora A Kinase

A three-dimensional pharmacophore model was developed from a series of inhibitors of Aurora A kinase to discover new potent anti-cancer agents using the HypoGen module in the Catalyst software. The pharmacophore model was developed based on the structure of 20 currently available inhibitors, which were carefully selected from the literature. The best hypothesis （Hypo 1） was defined by four features： one hydrogen-bond donor and three hy- drophobic points, with the best correlation coefficient of 0.909, the lowest rms deviation of 1.563, and the highest cost difference of 99.075. The Hypo 1 was then validated by a test set consisting of 24 compounds and by a cross-validation of 95% confidence level through randomizing the data using the CatScramble program, which suggested that a predictive pharmacophore model had been successfully obtained.