Modelling of a novel high-impedance matching layer for high frequency (>30 MHz) ultrasonic transducers

This work describes a new approach to impedance matching for ultrasonic transducers. A single matching layer with high acoustic impedance of 16 MRayls is demonstrated to show a bandwidth of around 70%, compared with conventional single matching layer designs of around 50%. Although as a consequence of this improvement in bandwidth, there is a loss in sensitivity, this is found to be similar to an equivalent double matching layer design. Designs are calculated by using the KLM model and are then verified by FEA simulation, with very good agreement Considering the fabrication difficulties encountered in creating a high-frequency double matched design due to the requirement for materials with specific acoustic impedances, the need to accurately control the thickness of layers, and the relatively narrow bandwidths available for conventional single matched designs, the new approach shows advantages in that alternative (and perhaps more practical) materials become available, and offers a bandwidth close to that of a double layer design with the simplicity of a single layer design. The disadvantage is a trade-off in sensitivity. A typical example of a piezoceramic transducer matched to water can give a 70% fractional bandwidth (comparable to an ideal double matched design of 72%) with a 3 dB penalty in insertion loss.     

钢筋混凝土旧工业厂房结构加固方案优选

当前人们选择旧工业厂房结构加固方案效率低下,且所考虑的因素较为片面,为了全面、高效地解决这一问题,通过综合考虑安全性、经济性、时间性、可行性和适用性等因素,以加固效果显著的工程案例为标准,以全面的18个参数为评价指标,构建了一种基于蛛网面积相似和形状相似的结构加固方案优选模型。该模型中首先运用熵权法确定18个指标权重,并将参数值归一化处理,随后运用Python计算蛛网结构相似度,检索出与目标范例最为相似的源范例。最后以结构加固效果显著的工程为例,验证了该模型能有效减少主观误差,具有较强的实用性,并以此模型优选出了某轧钢厂房结构加固方案。     

气源分子束外延生长的InPBi薄膜材料中的深能级中心

利用深能级瞬态谱(DLTS)研究了气源分子束外延(GSMBE)生长的InP1-xBix材料中深能级中心的性质。在未有意掺杂的InP中测量到一个多数载流子深能级中心E1,E1的能级位置为Ec-0.38 e V,俘获截面为1.87×10~(-15)cm~2。在未有意掺杂的InP0.9751Bi0.0249中测量到一个少数载流子深能级中心H1,H1的能级位置为Ev+0.31 eV,俘获截面为2.87×10~(-17)cm~2。深中心E1应该起源于本征反位缺陷PIn,深中心H1可能来源于形成的Bi原子对或者更复杂的与Bi相关的团簇。明确这些缺陷的起源对于InPBi材料在器件应用方面具有重要的意义。     

超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

IN SITU OBSERVATION OF 2-DIMENSIONAL TEXTURE OF EUROPIUM COMPLEX ON WATER SURFACE BY BREWSTER ANGLE MICROSCOPY

Monolayers of europium complexes on water surface have been directly visualized in the gas-liquid expanded region at different temperatures using Brewster angle microscopy (BAM). The film texture with network patterns of the complex (C₁₈)₂ Eu(DBM)₄ and hs evolution with time and temperature of the subphase were examined. The average linear cell dimension and the polygon areas have been analyzed as a function of time and the temperature. The mechanism of the domain growth is qualitatively discussed.     

Effect of additives on the structure and electrochemical performance of mesoporous nickel hydroxide

Nickel hydroxide mesoporous structures are synthesized by a simple method in the presence of different additives (oxalic acid, aminoacetic acid, and sulfosalicylic acid). Structural characterizations reveal that the additives can affect the crystal structure, increase the specific surface area, and reduce the pore size of the products. The electrochemical properties of the synthesized Ni(OH)₂ samples are dependent on their crystal phase, surface area, and pore size distribution. Mesoporous β-Ni(OH)₂ with poor crystallinity shows high specific capacitances at different current densities and excellent cycling ability. A highest specific capacitance of 1,693 F?g^?1 can be achieved at a scan rate of 5 mV?s^?1. The results suggest its potential application in electrochemical supercapacitors.     

Microscopy of pentacene thin films

Thin films of pentacene were deposited by vacuum sublimation onto amorphous carbon, glass, silicon and mica substrates, then characterized by X-ray and electron diffraction, transmission electron microscopy (TEM) and atomic-force microscopy (AFM). Sub-monolayer films consist of dendritic islands, which change to more compact fractal shapes upon transforming to a multilayer structure (with decrease in surface area) prior to complete coverage of the substrate. Increased crystallite size was obtained by heating the substrate during deposition and by post-deposition annealing. Irradiation with 200-keV electrons was found to destroy the crystallinity of the films after a dose of 0.6?C/cm² (or 2?C/cm² if the specimen is cooled to 90?K during TEM observation). We argue that, despite this moderate radiation sensitivity, TEM under near-optimal conditions can image monolayers of pentacene with sub-nm resolution.     

GaN FP-HEMTs中击穿电压与电流崩塌的关系

研究了钝化在抑制电流崩塌的同时，会引起HEMT器件击穿电压的下降.而采用场板结构的AlGaN/GaN场板HEMT器件(FP-HEMT)的击穿电压从46V提高到了148V，表明了场板对提高击穿电压有显著作用(3倍以上).接着，比较了FP-HEMT器件与常规HEMT器件，钝化后HEMT器件在应力前后的电流崩塌程度，得出了采用场板结构比之钝化对器件抑制电流崩塌有更明显作用的结论.从理论上和实验上都表明，采用场板结构能够很好解决提高击穿电压与抑制电流崩塌之间的矛盾. 关键词： GaN 场板 击穿电压 电流崩塌     

四氯苯醌与嘧啶类核酸碱基的光化学氢抽取和电子转移反应

采用纳秒时间分辨的激光闪光光解实验技术,研究了四氯苯醌(TCBQ)分子与两种嘧啶核酸碱基(胸腺嘧啶和尿嘧啶)分子在355nm激发下的光化学反应动力学. 355 nm将TCBQ分子布居到激发三重态³TCBQ^*,高反应活性的³TCBQ^*与碱基分子发生两个平行的反应,氢抽取反应和电子转移反应,分别对应生成瞬态光谱上观测到的两个光反应产物TCBQH·和TCBQ·^-. 这两个反应同时生成的碱基自由基和碱基阳     

应用于扫描探针显微镜的石英音叉机械模型研究

石英音叉作为力传感器广泛地应用于各种扫描探针显微镜,主要涉及石英音叉的同相振动和反相振动两种振动模式.通过实验方法和有限元仿真方法对石英音叉的两种振动模式进行研究,发现石英音叉的双臂之间以及双臂与音叉的基部之间都存在耦合作用,双臂之间的耦合使音叉的反相共振频率升高,双臂与基部之间的耦合使音叉的同相共振频率降低.针对两种振动模式的动态特性建立了石英音叉的机械模型并进行合理简化.简化模型是一个四弹簧三质点系统,计算了简化模型的参数.通过一个音叉臂等效质量变化与音叉反相共振频率变化之间的定量关系证明了简化机械模 关键词： 扫描探针显微镜 石英音叉 振动模式 机械模型