磁场对四端量子波导中电子输运性质的影响

采用模匹配方法，研究了非均匀磁场下开放的四端量子波导中的电子输运性质. 结果表明，从一端入射的电子可以透射到两个与之垂直的输出端和一个与之平行的输出端. 在没有外加磁场的情况下，两个垂直输出端的输运概率是相同的，但垂直端与水平端的输运概率不同；在外加磁场下，由于磁边缘态效应，两个垂直输出端的输运概率也有着相当大的差别. 通过施加不同的磁场，我们能获得丰富的电子输运结构，如台阶，宽谷，尖峰等；通过调节磁场的大小和比例以及结构参数可控制该量子结构在各输出端的输运概率. 关键词： 电子输运 介观体系 磁效应     

脉冲磁场处理对碳纳米管掺杂MgB2线材临界电流密度的影响

对碳纳米管(CNT)掺杂MgB₂超导体磁场处理后的行为进行了研究. 结果表明，CNT掺杂MgB₂超导体经5T脉冲磁场处理后临界电流密度J_c(H)在低磁场下提高了2—3倍，高场下提高一个数量级以上，扫描电镜结果显示CNT沿着处理磁场方向规则排列并且成为MgB₂基体的形核中心和高效的磁通钉扎中心. 关键词： 2')" href="#">MgB₂ 碳纳米管 脉冲磁场处理     

牛顿环中心暗斑大小对测量结果影响的研究

本文分析了牛顿环中心暗斑大小对测量结果的影响,并给出了解决方法。     

Surface rumpling of cubic CaTiO3 from density functional theory

In this paper, the structure of cubic CaTiO3 （001） surfaces with CaO and TiO2 terminations has been studied from density functional calculations. It has been found that the Ca atom has the largest relaxation for both kinds of terminations, and the rumpling of the CaO-terminated surface is much larger than that of TiO2-terminated surface. Also we have found that the metal atom relaxes much more prominently than the O atom does in each layer. The CaO-terminated surface is slightly more energetically favourahle than the TiO2-terminated surface from the analysis of the calculated surface energy.     

多目标半定规划的加权中心路径法

对于线性型多目标半定规划问题，引进加权中心路径的概念，并利用单目标半定规划的中心路径法，提出了求解多目标半定规划问题的加权中心路径法，先得型对一个叔向量的有效解，然后在此基础上，提出了通过一次迭代得到对应一定范围内其他任意权向量的有效解的一步修正方法．     

Optical characteristics of semiconductor saturable absorber mirrors investigated by the reflection Z-scan technique

Recently, the semiconductor saturable absorber mirror (SESAM) has become a key component of passive mode-locked solid-state lasers. Here we present a simple method based on the reflection Z-scan technique to measure the key optical parameters of SESAM such as saturation fluence and modulation depth. The experimental results demonstrate that our method is able to perform with a high accuracy of 10⁻⁴ and a dynamic range of over four orders of magnitude.     

Slow positron beam study of corrosion-related defects in pure iron

Corrosion-related defects of pure iron were investigated by measuring Doppler broadening energy spectra (DBES) of positron annihilation and positron annihilation lifetime (PAL). Defect profiles of the S-parameter from DBES as a function of positron incident energy up to 30 keV (i.e. ∼1 μm depth) were analyzed. The DBES data show that S-parameter increases as a function of positron incident energy (mean depth) after corrosion, and the increase in the S-parameter is larger near the surface than in the bulk due to corrosion. Furthermore, information on defect size from PAL data as a function of positron incident energy up to 10 keV (i.e. ∼0.2 μm depth) was analyzed. In the two-state trapping model, the lifetime τ₂ = 500 ps is ascribed to annihilation of positrons in voids with a size of the order of nanometer. τ₁, which decreases with depth from the surface to the bulk, is ascribed to the annihilation of positrons in dislocations and three-dimensional vacancy clusters. The corroded samples show a significant increase in τ₁ and the intensity I₂, and near the surface the corroded iron introduces both voids and large-size three-dimensional vacancy clusters. The size of vacancy clusters decreases with depth.     

模拟退火法在吸收薄膜的椭偏反演算法中的应用

将一种广泛用于求解复杂系统优化问题的技术－－模拟退火法－－用来求解椭偏反演方程。首先假设一个薄膜模型，计算出其相应的椭偏参数（Ψ，Δ）的值，在这个计算值的基础上加入不同标准偏差的高斯噪声；然后将加入噪声后的值（Ψm,Δm)作为模拟的测量数据，采用模拟退火算法进行求解，验证得知这种方法求得的薄膜参数很接近于假设的薄膜模型参数的真值，与其他文献的报道结果一致，而且在扩大搜寻范围时，仍然可以得到准确解，从而证明了该方法的可行性以及有效性。