Facile and scalable fabrication engineering of fullerenol nanoparticles by improved alkaline-oxidation approach and its antioxidant potential in maize

A feasible in operation, labor-saving and low-cost one-step technology to fabricate fullerenol nanoparticles (FNPs) up to 10 g in laboratory was developed by improved alkaline-oxidation approach using moderately concentrated sodium hydroxide solution as the hydroxylation agent and o-dichlorobenzene as the solvent. This strategy paves the avenue for industrial-scale bulk production of FNPs. The resulted product, [C₆₀(OH)₂₂·8H₂O]_n, were characterized by various measurements including matrix-assisted laser desorption ionization time-of-flight mass spectrometry, high-resolution ¹H nuclear magnetic resonance spectrometry, Fourier transform infrared spectroscopy, UV-Visible spectrophotometer, thermogravimetric analysis, differential scanning calorimetry, dynamic light scattering analysis, scanning electron microscopy, and electron spin resonance spectrometer. Radical scavenging assay in vitro confirmed the high efficiency of water-soluble [C₆₀(OH)₂₂·8H₂O]_n as a novel radical scavenger. Furthermore, [C₆₀(OH)₂₂·8H₂O]_n as an excellent candidate has the potential to serve as the plant defense stimulation agent in maize.

Open image in new window

Graphical abstract ?

     

A novel carbon source coated on C-LiFePO<Subscript>4</Subscript> as a cathode material for lithium-ion batteries

The poor electronic conductivity and low lithium-ion diffusion are the two major obstacles to the largely commercial application of LiFePO₄ cathode material in power batteries. In order to improve the defects of LiFePO₄, a novel carbon source polyacrylonitrile (PAN), which would form the hierarchical porous structure after carbonization, is fabricated and used. This work comes up with a simple and facile carbothermal reduction method to prepare porous-carbon-coated LiFePO₄ (C-LiFePO₄-PC) composite and to study the effect of carbon-coated temperature on ameliorating the electrochemical performance. The obtained C-LiFePO₄-PC composite shows a high initial discharge capacity of 164.1 mA h g^?1 at 0.1 C and good cycling stability as well as excellent rate capacity (49.0 mA h g^?1 at 50 C). The most possible factors that improve the electrochemical performance could be related to the enhancement of electronic conductivity and the existence of porous carbon layers. In a word, the C-LiFePO₄-PC material would become an excellent candidate for application in the fields of lithium-ion batteries.     

基于光谱分析的CO_2激光+脉冲GMAW复合焊峰值状态激光能量传输研究

在激光+脉冲GMAW复合焊接过程中,焊丝端部金属熔化产生大量的金属蒸汽,导致等离子体中电子、粒子的扩散现象加剧,使得激光的传输模式和工件对激光能量的吸收率和吸收模式发生变化。基于光谱分析的方法得到了复合焊接峰值状态的电子密度和温度分布,通过高速摄影分析了不同焊接模式下等离子体形态的变化,结合Beer-Lambert吸收定律计算了不同焊接模式下激光的吸收率。结果表明,在复合焊过程中,由于焊丝端部金属被熔化,焊丝的金属蒸汽进入激光等离子体内部,导致激光匙孔上方电子密度进一步提高,等离子体吸收激光能量能力增强,使得激光的传输效率从纯激光焊的94.16%降低到了CO_2激光+脉冲GMAW复合焊的85.84%。     

用吐温80-硫酸铵-水体系的液-固萃取光度法测定痕量镍

研究了Ni()-PAR在吐温80-硫酸铵-水体系中的最佳萃取条件,建立了水样中测定痕量镍的非有机溶剂液-固萃取光度法。在NH3·H2O-NH4Cl缓冲溶液中,金属配合物Ni()-PAR可被吐温80固相富集萃取,最大吸收波长为500nm,镍含量在0—1.0μg/mL范围内服从朗伯-比耳定律,表观摩尔吸光系数为6.345×104L·mol-1·cm-1。该法测定水样中镍含量,回收率可达96.3%—103.0%。     

水体中溶解氧对声致发光的影响

采用声源频率为1.1 MHz的超声波, 在温度为283～313 K的范围内引发水中的声致发光, 发现声致发光强度的对数lnI和水中的溶解(DO)的浓度之间呈线性关系。同时模拟了水中含有5种阴离子: Cl-, SO-₄, F-, NO-₃, HCO-₃时阴离子的存在对声致发光的影响, 发现上述5种阴离子对声致发光强度没有影响。     

光纤直接耦合微加工型可调光衰减器

设计研制了一种新型小体积, 低成本的光纤直接耦合微加工型可调光衰减器. 该器件采用电磁微线圈驱动柔性框架上的活动光纤微位移实现信号功率衰减变化, 驱动电压为0~8 V, 工作范围0~65 dB, 动态时间响应小于2.3 ms. 器件构造工艺主要使用了CNC高精度雕刻和激光点焊封装技术. 利用有限元单元法进行器件理论分析, 并报告了其测试性能.     

Dependence of stresses on grain orientations in BCC polycrystalline films on substrates

Most thin films have different thermal expansion coefficients from their substrates, thus thermal stresses will be introduced into the films when the temperature is changed during annealing and service. Calculations of these stresses for grains in various crystallographic orientations have been made for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic and the stresses are equiaxial and without grain orientation （hkl） dependence, the BCC metals may be grouped into two classes. In the first class （Cr, Mo, Nb and V）, the （100）-oriented grains have the largest stresses, while the stresses σ1 and σ2 in other （hkl）-oriented grains decrease linearly with the increase of the angle between （hkl） and （100）, and with σ1 〈 σ2 except in （100）- and （lll）-oriented grains. In the second class （Fe and Ta）, on the contrary, the （100）-oriented grains have the lowest stresses, and the stresses σ1 and σ2 in other （hkl）-oriented grains increase linearly with the increase of the angle between （hkl） and （100）, and with σ1 〉 σ2 except in （100）- and （111）-oriented grains.     

带有STC功能的接收机中频组件的设计

本文介绍了带有STC功能的接收机中频组件的设计,它动态范围宽,输出饱和电平大,选择性好,响应时间快.同时,对系统的电磁干扰加以讨论,并介绍了抗干扰的有效措施.