普适的基于能量的分块局域激发态聚类算法

在普适的基于能量的分块(GEBF)方法的框架下, 大体系的局域激发(LE)能可通过一系列活性子体系激发能的线性组合近似得到, 从而有效降低了计算的时间标度. 然而, 在体系的局域激发具有多个激发态的情形下, 如何有效识别所有活性子体系的激发特征并将其组合是一个挑战. 提出了一种基于局域激发态聚类的算法. 该方案基于空穴-电子分析和基于密度的聚类(DBSCAN)机器学习算法, 可以自动地聚合不同子体系中最相似的激发态并组合得到相应的局域激发态能量或激发能. 结合该算法改进的LE-GEBF方法在荧光分子衍生物、 荧光染料-水团簇及绿色荧光蛋白模型体系的计算中均获得了令人满意的结果. 该算法有望大大提升LE-GEBF方法在计算局域激发时的稳定性和准确性, 并可以有效处理吸收光谱具有多重峰的大体系.     

具有光控氧空缺的钼掺杂Bi5O7Br纳米片用于光催化氮气合成氨

氨(NH3)作为合成燃料、化肥和潜在能源载体的重要前体,是现代化学工业中最重要的化学品之一.工业中主要通过高能耗的Haber-Bosch工艺在高温高压下将氮气和氢气转化为NH3,而原料氢气由天然气蒸汽获得,因而不仅消耗大量能源,而且导致温室气体二氧化碳的大量排放,对环境造成危害.光催化固氮以光能为驱动力,以水为质子源,为合成NH3提供了一种温和、绿色和可持续的方法.然而,传统固氮催化剂具有与N2结合弱、成键难以及电子转移效率低的缺点.为了克服上述问题,在催化剂中引入氧空缺和过渡金属作为给电子中心和活性位点的策略被广泛研究.本文以半导体Bi5O7Br纳米片作为研究对象,通过在水热合成过程中添加Na2MoO4前驱盐在Bi5O7Br中掺杂钼元素,合成了不同摩尔含量的钼掺杂Bi5O7Br(Mo-Bi5O7Br)纳米片,并将其应用于光催化N2还原反应,发现Mo-Bi5O7Br的光催化固氮性能显著优于空白Bi5O7Br的催化性能.扫描电镜、透射电镜、能量色散X射线元素映射以及X射线光电子能谱的结果表明,掺杂过程不会影响Bi5O7Br纳米片的晶相和形貌,掺杂后钼元素均匀地分布在Bi5O7Br纳米片晶格中.采用紫外可见漫反射光谱、电子自旋共振光谱、氮气程序升温脱附谱以及光电化学测试等方法研究了Mo-Bi5O7Br相较于空白Bi5O7Br纳米片在光催化N2还原反应中催化性能提升的原因.UV-vis DRS结果表明,钼掺杂对Bi5O7Br可见光吸收能力具有增强作用.以催化NH3产率最高的Mo-Bi5O7Br-1(Mo摩尔百分含量为1％)为研究样本,EPR结果表明,在黑暗条件下,只有Mo-Bi5O7Br-1样品可以检测到明显的表面氧空位(OVs)信号;在光照条件下,Bi5O7Br和Mo-Bi5O7Br-1两种样品都出现OVs的信号峰,但同等光照时间下的Mo-Bi5O7Br-1具有更高的信号强度.此外,OVs信号会随着光照时间的延长逐渐增强;当移除光源后,信号强度逐渐降低.这表明Mo-Bi5O7Br-1在光照下会产生更高浓度的表面光控OVs.N2-TPD结果表明,光控OVs作为活性位点促进催化剂对N2的吸附.关闭光源后,OVs被环境中的水或氧气中的氧原子重新填充,避免了OVs易被氧化而导致反应失活的缺点,有助于保持Mo-Bi5O7Br-1催化N2还原反应的活性和稳定性.光电化学表征结果表明,Mo-Bi5O7Br-1中的光生载流子的分离和迁移效率明显提高.以上结果表明,掺杂过渡金属钼有助于Bi5O7Br纳米片表面光控OVs的生成,光控OVs作为活性位点提升了Bi5O7Br吸附和活化N2的能力,钼掺杂和光控OVs协同提高Bi5O7Br内部光生载流子的分离迁移效率,增强Bi5O7Br光催化固氮合成氨的反应性能.     

Metabolome Analysis of Selective Inactivation of Human Melanoma and Normal Cells by Cold Atmospheric Plasma

Plasma Chemistry and Plasma Processing - Cold atmospheric plasma (CAP) is a novel technology which is widely used in the biomedical field and has developed quickly over the past few years,...     

MIL-53(Al)衍生的Rh单原子催化剂在间氯硝基苯选择性加氢制间氯苯胺反应中的应用

卤代苯胺是化学工业中重要的中间体,主要用于制造药物、聚合物、染料等含氮化学品,用多相金属催化剂催化卤代硝基芳烃加氢制备卤代苯胺是一种高效,绿色和可持续发展的生产工艺.该过程需要选择性加氢硝基基团,同时避免卤素基团的脱卤副反应发生.然而,化学选择性加氢存在巨大的挑战,难点在于催化剂的精准设计,一方面要求具备对硝基基团合适的加氢能力,另一方面要阻止对卤素基团的脱卤副反应发生.基于此,研制高效多相金属催化剂用于卤代硝基芳烃选择性加氢制备卤代苯胺反应引起了高度关注.近年来,单原子金属催化剂受到越来越多的关注,并在卤代硝基芳烃选择性加氢制备卤代苯胺反应中显现出极大的潜力.本文通过在金属有机骨架材料MIL-53(Al)自组装的过程中将金属Rh原位嫁接其骨架结构中,继而通过限域热解的方法制备了Rh@Al2O3@C单原子催化剂,其在间氯硝基苯(m-CNB)加氢制间氯苯胺(m-CAN)反应中显现了高效催化选择性.球差校正高角度环形暗场模式的透射电镜,CO作为探针分子的红外光谱和X射线光电子能谱等结果发现,Rh是以单原子的形式均匀的分布在Al2O3上并被无定型碳包覆,且Rh化学价态呈正价.而27Al固体核磁共振与密度泛函理论计算的结果则进一步确定Al2O3@C载体中存在的五配位的Al物种(AlV)是锚定Rh单原子的主要位点,AlV的不饱和的配位结构可以有效地稳定Rh单原子,对形成Rh位点的单原子分散至关重要.在间氯硝基苯选择性加氢制间氯苯胺反应中,与等体积浸渍法制备的Rh/C和Rh/γ-Al2O3纳米催化剂相比,Rh@Al2O3@C单原子催化剂表现出优异催化性能:其在313 K,氢气压力为20 bar的温和条件下转换频率(TOF)高达2317 molm-CNB·molRh-1·h-1,优于已报道的多相金属催化剂,是目前的最高值.此外,该催化剂展现出极佳的稳定性能,经过五次循环后,该催化剂对m-CAN的选择性仍旧保持在98％左右.Rh@Al2O3@C单原子催化剂的优异催化性能源自于金属单原子结构的形成对于金属位点电子结构的有效调节,进而调控催化剂加氢性能并实现对加氢脱卤副反应的抑制;与此同时,Rh@Al2O3@C催化剂增进了酸位点的可及性,从而促进了其串联步骤中包含的脱水反应的发生,进而有效提高催化剂的反应活性.     

Effective changes in cellulose cell walls,gas permeability and sound absorption capability of Cocos nucifera (palmwood) by steam explosion

Steam explosion is a useful method to soften and dimensionally stabilizing wood. A significant increase in air permeability and sound absorption capability of steam-exploded palmwood compared to untreated palmwood is observed due to changes in cell wall. Cell wall’s changes are characterized by instrumental techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscope and gas permeability by capillary flow porometry and sound absorption coefficient by two-microphone transfer function method. The average increase in air permeability (259.3%) and sound absorption coefficient (52.33% at frequency range of 250–6400 Hz) of steam-exploded samples is higher than that of untreated samples. Color of steam-exploded woods become black due to chemical reactions in cell wall during steam explosion. The color change, air permeability and sound absorption coefficient of wood are correlated with the findings. These results suggest that low-pressure steam explosion could be considered as an effective technique for improving the air permeability and sound absorption capability of palmwood in the longitudinal direction. This approach could be useful to manufacture sound absorption board to control the acoustical housing environment.

     

三维钴基MOF[KCo7(OH)3(ip)6(H2O)4]·12H2O作为超级电容器的高容量电极材料

为了开发较高能量密度的超级电容器,我们通过简单的溶剂热反应合成了一种三维的钴基金属有机框架(MOF)化合物([KCo7(OH)3(ip)6(H2O)4]·12H2O,Co?ip;ip=间苯二甲酸根),并考察了其作为超级电容器电极材料的性能。Co?ip电极显示出高比电容、良好的循环稳定性和优良的倍率性能。在1 mol·L^-1 KOH溶液中,电流密度为1 A·g^-1时,其最大比电容为1660 F·g^-1。在电流密度为2 A·g^-1条件下,循环3000次后,其比电容的保持率为82.7%。优异的超级电容性能可归因于Co?ip具有纳米尺寸颗粒和三维的多孔结构。     

Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection

Luminescent conjugated network polymer is one of the most promising chemo-sensors owing to their good chemical/optical stability and multiple functionalization.Herein,three conjugated network polymers were prepared by using aggregation-induced emission active 1,1,2,2-tetrakis(4-formyl-(1,1'-biphenyl))-ethane(TFBE) unit as monomer and hydrazine as linker.Through regulating the synthetical condition,the polyme ric network can form either unifo rm two-dimensional azine-linked nanosheets(ANS),conjugated microporous polymers(A-CMP) or covalent organic frameworks(A-COF).All of these polymers exhibited good stability and high fluorescence quantum efficiency with the quantum yield of6.31% for A-NS,5.26% for A-CMP,and 5.80% for A-COF,as well as fast and selective fluorescence quenching response to 2,4,6-trinitrophenol(TNP).And the best TNP sensing performance with the Stern-Volmer constants(K_(sv)) values up to 8 × 10~5 L/mol and a detection limit of 0.09 μmol/L was obtained for A-NS.The study explores various strategies to construct conjugated polymers with different nanoarchitectures based on the same building block for sensitive detection of explosives.     

Copper-cobalt-nickel oxide nanowire arrays on copper foams as self-standing anode materials for lithium ion batteries

Numerous scientists are in the pursuit of energy storage materials with high energy and high power density by assembly of electrochemically active materials into conductive scaffolds, owing to the emerging need for next-generation energy storage devices. In this architectures, the active materials bonded to the conductive scaffold can provide a robust and free-standing structure, which is crucial to the fabrication of materials with high gravimetric capacity. Thus, hierarchical copper-cobalt-nickel ternary oxide (CuCoNi-oxide) nanowire arrays grown from copper foam were successfully fabricated as free-standing anode materials for lithium ion batteries (LIBs). CuCoNi-oxide nanowire arrays could provide more active sites owing to the hyperbranched structure, leading to a better specific capacity of 1191 mAh/g, cycle performance of 73% retention in comparison to CuO nanowire structure, which exhibited a specific capacity of 1029 mAh/g and capacity retention of 43%, respectively.     

The intragastrointestinal fate of paclitaxel-loaded micelles: Implications on oral drug delivery

The goal of the present study is to elucidate the intragastrointestinal fate of micellar delivery systems by monitoring fluorescently labeled different micelles and the model drug paclitaxel (PTX). Both in vitro and ex vivo leakage studies showed fast PTX release in fluids while micelles remained intact, except in fed-state simulated intestinal fluid and fasted-state pig intestinal fluid, thus referring to the intact absorption of micelles and PTX leakage in the gastrointestinal tract with d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) micelles showing higher stability than other micelles. All groups of micelles were absorbed intact in Caco-2 and Caco-2/HT29-MTX cell models and the absorption of TPGS micelles was found to be higher than other micelles. The transport of the micelles across Caco-2/Raji (1.6%–3.5%), Caco-2 (0.8%–1%), and Caco-2/HT29-MTX (0.58%–1%) cell monolayers further verified the absorption of micelles and their subsequent transport; however, more TPGS micelles transported across cell monolayers than other groups. Moreover, the histological examination also confirmed that micelles entered the enterocytes and were transported to basolateral tissues and TPGS showed the stronger ability of penetration than other groups. Thus, these results are succinctly presenting the absorption of intact micelles in GIT confirmed by imaging evidence with prior leakage of the drug, uptake by enterocytes and the transport of micelles that survive the digestion by enterocytes and mainly by microfold cells in material nature dependent way with TPGS showing better results than other groups. In conclusion, these results identify the mechanism by which the gastrointestinal tract processes micelles and point to the likely use of this approach in the design of micelles-based therapies.     

Carbon dots/Bi_2WO_6 composite with compensatory photo-electronic effect for overall water photo-splitting at normal pressure

Overall water photo-splitting is a prospective ideal pathway to produce ultra-clean H_2 energy by semiconductors.However,the band structure of many semiconductors cannot satisfy the requirement of H_2 and O_2 production at the same time.Herein,we illustrate that carbon dots(CDs)/Bi_2 WO_6 photocatalyst with compensatory photo-electronic effect has enhanced activity for overall water photo-splitting without any sacrificial agent.In this complex photocatalytic system,the photo-potential provided by CDs makes the CDs/Bi_2 WO6(C-BWO) composite could satisfy the band structure conditions for overall water photo-splitting.The C-BWO composite(3 wt% CDs content) exhibits optimized hydrogen evolution(oxygen evolution) of 0.28 μmol/h(0.12 μmol/h) with an approximate 2:1(H_2:O_2) stoichiometry at normal pressure.We further employed the in-situ transient photovoltage(TPV) technique to study the photoelectron extraction and the interface charge transfer kinetics of this composite catalyst.