Ru掺杂对Fe催化剂上酚类化合物加氢脱氧影响的密度泛函理论研究北大核心CSCD

采用密度泛函理论(DFT)计算研究了苯酚、邻甲酚、愈创木酚在不同结构Ru-Fe(211)表面上吸附活化性能和加氢脱氧反应路径.结果表明,Ru掺杂能促进H2分子在Fe(211)表面上解离,提高加氢脱氧反应速率.酚类在1Ru_(ads)-Fe(211)表面上吸附比在1Ru_(sub)-Fe(211)表面上更稳定,苯酚和邻甲酚脱羟基步骤能垒分别降低0.13和0.28 eV,有利于生成芳烃.愈创木酚在1Ru_(sub)-Fe(211)表面上加氢脱氧优势路径是先脱甲氧基生成苯酚,苯酚再加氢脱氧生成产物苯(速控步骤能垒1.16 eV);而在1Ru_(ads)-Fe(211)表面上愈创木酚先脱羟基再脱甲基生成苯酚的路径更具有动力学优势(速控步骤能垒1.21 eV).计算结果表明Ru掺杂方式影响Fe催化剂对酚反应分子的吸附稳定性以及加氢脱氧反应路径和性能.与1Ru掺杂Fe(211)催化剂相比,增加Ru原子数形成4Ru_(ads)-Fe(211),能够进一步提高酚类反应物的吸附强度,但导致加氢脱氧反应能垒升高.因此,在Fe催化剂上以表面吸附的形式掺杂少量贵金属Ru更利于酚类加氢脱氧生成芳烃.     

高效液相色谱-四极杆-飞行时间质谱快速筛查鉴别食品中非法添加的62种中药材北大核心CSCD

建立了高效液相色谱-四极杆-飞行时间质谱快速筛查鉴别食品中非法添加的62种中药材的方法。依据卫生部关于进一步规范保健食品原料管理的通知(卫法监发[2002]51号)中可用于保健食品的物品名单,确定食品中可能非法添加的62种中药材原料清单,再从62种中药材中筛选其特征组分,获得不同中药材对应的特征组分清单。62种对照药材经甲醇超声提取后,于Thermo Accucore aQ色谱柱(150 mm×2.1 mm,2.6μm)上分离,在电喷雾正负离子扫描模式下,分别以0.1%(v/v)甲酸水溶液-乙腈和水-乙腈为流动相梯度洗脱,进行一级质谱和二级质谱全扫描检测,采用Library View软件建立不同中药材对应的特征组分的一级精确质量数据库和二级碎片质谱库。样品同法处理后上样分析,采用Peak View软件将样品高分辨数据与自建数据库中的质谱图、精确分子离子质量数、碎片离子质量数、保留时间等相关参数进行快速筛查鉴别分析。该工作通过建立“中药材-特征组分”对应清单,构建了食品中易非法添加的62种中药材中共388种特征组分的高分辨质谱库,每种中药材包括5~10种特征组分,通过对实际食品样品配制酒、代用茶及饮料进行筛查分析,1批次配制酒样品与淫羊藿中药材的7种特征组分匹配一致,推断该配制酒样品中加入了淫羊藿中药材。该法可实现无标准品情况下中药材的定性筛查,具有高通量、准确、简便、快捷的特点,解决了食品中非法添加中药材难以识别和确证的难题,可以实现食品中非法添加中药材的快速筛查鉴别分析。     

运用文本分析法对比研究新旧人教版教材“反应热”内容

从课标、概念组织结构、教学资料对新旧人教版选修“反应热”内容进行对比分析,研究发现:(1)新课标在内容上更加强调“反应热”概念的学科理解,渗透变化观与守恒观等基本观念,突出学习素材的重要性;(2)新教材在内容组织上厘清了“反应热”“焓变”“能量转化”等核心概念之间的关系,重视对“反应热”内容的结构化认识;(3)新教材在图片、实验、习题增强了情境性与科学性。建议教师在教学中增进对“反应热”的学科理解,运用概念构图策略促进学生知识结构化,创设真实情境提高学生的问题解决能力,培养化学学科核心素养。     

超高效液相色谱－四极杆－飞行时间质谱技术非靶向定性筛查猪肉中79种药物残留

利用超高效液相色谱－四极杆－飞行时间质谱（UPLC－Q－TOF MS）建立了猪肉中79种药物残留的非靶向定性筛查方法。猪肉样本采用0.5%（体积分数）甲酸－乙腈溶液先提取,甲醇后提取的组合提取方式,离心后上清液通过FAVEX－NM50兽药残留快速柱净化。以Acquity UPLC BEH HSS－C18色谱柱（2.1 mm × 150 mm,1.7 μm）进行分离,UPLC－Q－TOF MS电喷雾正离子模式电离,全信息串联质谱（MSE）模式检测。79种物质在相应范围内的线性关系良好,相关系数（r2）均不小于0.99,方法的检出限和定量下限分别为0.05 ~ 10 μg/kg和0.10 ~ 20 μg/kg。基于实验室自建质谱数据库,对模拟阳性样本以及市售猪肉样本进行筛查,同时使用高灵敏度Xevo TQ－S串联四极杆质谱多反应监测模式（MRM）对市售猪肉样本进行验证。结果表明,所建立的方法高效、快速、通量高,适用于猪肉中药物残留的筛查和鉴定。     

Precise electro-reduction of alkyl halides for radical defluorinative alkylation

Science China Chemistry - Reported here is a precise electro-reduction strategy for radical defluorinative alkylation towards the synthesis of gem-difluoroalkenes from...     

Selective solid-phase microextraction of polycyclic aromatic hydrocarbons in water based on oriented phosphorus-containing titanium oxide nanofibers grown on titanium support prior to high-performance liquid chromatography with ultraviolet detection

A novel solid-phase microextraction coating of phosphorous-containing titanium oxide composite was developed using titanium fiber as a support and a titanium source by hydrothermal oxidation in a phosphoric acid solution containing hydrogen peroxide. The morphology of the fiber coatings was controlled by the conditions of the hydrothermal oxidation reaction. The oriented nanofiber coating was employed to extract several types of representative aromatic analytes. The experimental results demonstrated that the as-prepared fiber exhibited excellent extraction efficiency toward polycyclic aromatic hydrocarbons. Combined with high-performance liquid chromatography with ultraviolet detection, main extraction conditions were optimized, including pH, ionic strength, extraction temperature, stirring rate, extraction time and desorption time. The established method presented good linearity from 0.05 to 200 μg/L with limit of detection ranging from 0.012 to 0.126 μg/L. This convenient and green procedure was suitable for the selective extraction and determination of typical polycyclic aromatic hydrocarbons in environmental water samples. The relative recoveries of 85.8–112% were obtained for the determination of target polycyclic aromatic hydrocarbons in water samples spiked with 5.0 and 15.0 μg/L. Moreover, the as-prepared fiber showed at least 210 extraction/desorption cycles due to its high mechanical and chemical stability.     

Isolation of three glucaric acids from Leonurus japonicus Houtt. by using high-speed countercurrent chromatography combined with semi-preparative high-performance liquid chromatography

The isomerism of glucaric acids and the complexity of the composition of Leonurus japonicus Houtt. increased the difficulty of the separation of glucaric acids from the herb. In the present study, three glucaric acids were isolated from Leonurus japonicus Houtt. by using high-speed countercurrent chromatography combined with semi-preparative high-performance liquid chromatography. Cation exchange resin chromatography was applied to remove the alkaloids and enrich the glucaric acid fractions. Preliminary separation of the glucaric acid extract by high-speed countercurrent chromatography was carried out at 45℃ by using an optimized solvent system of ethyl acetate/n-butanol/formic acid/water (1:1:0.01:2, v/v/v/v) with satisfied stationary phase retention and separation factor. The semi-preparative high-performance liquid chromatography was used for further separation and purification of the target fractions, and three monomeric compounds were obtained with purities of 90.0, 91.0, and 95.3%. UV spectroscopy, NMR spectroscopy, and mass spectrometry were employed to identify their structures, which were assigned as 2-syringyl glucaric acid, 2,4-disyringyl glucaric acid, and 3,4-disyringyl glucaric acid, respectively, and 2,4-disyringyl glucaric acid was reported for the first time.     

Recent Progress in High-Performance Lithium Sulfur Batteries: The Emerging Strategies for Advanced Separators/Electrolytes Based on Nanomaterials and Corresponding Interfaces

Lithium-sulfur (Li−S) batteries, possessing excellent theoretical capacities, low cost and nontoxicity, are one of the most promising energy storage battery systems. However, poor conductivity of elemental S and the “shuttle effect” of lithium polysulfides hinder the commercialization of Li−S batteries. These problems are closely related to the interface problems between the cathodes, separators/electrolytes and anodes. The review focuses on interface issues for advanced separators/electrolytes based on nanomaterials in Li−S batteries. In the liquid electrolyte systems, electrolytes/separators and electrodes system can be decorated by nano materials coating for separators and electrospinning nanofiber separators. And, interface of anodes and electrolytes/separators can be modified by nano surface coating, nano composite metal lithium and lithium nano alloy, while the interface between cathodes and electrolytes/separators is designed by nano metal sulfide, nanocarbon-based and other nano materials. In all solid-state electrolyte systems, the focus is to increase the ionic conductivity of the solid electrolytes and reduce the resistance in the cathode/polymer electrolyte and Li/electrolyte interfaces through using nanomaterials. The basic mechanism of these interface problems and the corresponding electrochemical performance are discussed. Based on the most critical factors of the interfaces, we provide some insights on nanomaterials in high-performance liquid or state Li−S batteries in the future.