萘降解菌LHJ38生物合成靛蓝的研究

萘降解菌LHJ38在金属盐培养基中加入水杨酸钠诱导培养后能提高其生物合成靛蓝的能力,在LB培养基中加入水杨酸钠反而抑制了其生物合成靛蓝的能力.与LHJ38最适生长pH值不同,LHJ38生物合成靛蓝的最佳pH值范围是8.45—9.45,在pH为8.95的情况下生物合成靛蓝能力是其在pH值为6.95的情况下的两倍.     

Rheological Behavior of Titanium Dioxide Suspensions

The rheological properties of titanium dioxide dispersed in water are measured over a wide range of powder concentrations, temperatures, and pH values. The value of intrinsic viscosity of titanium dioxide measured with an Ubbelohde capillary viscometer is 3.55, which is useful for determining the shape and aggregation property of the particles. The yield stress and steady shear viscosity of titanium dioxide with broad and narrow particle size distributions were measured over a wide range of solid volume fractions on a Brabender rheometer. It is observed that the rheological properties of the suspensions are quite different due to the difference in particle size distributions. Quemada, Casson, and Zhou's models were used to fit the experimental data and useful parameters were obtained. Calculated data are also in good agreement with the experimental data. As expected, the shear viscosity and yield stress decrease with increasing temperature. But when the temperature is around 50 degrees C, yield stress increases with increasing temperature while shear viscosity exhibits a complex behavior. The phenomena are very interesting and special. The Peclet number was used to analyze the shear thickening behavior. Models were also used to describe the shear viscosity under different temperatures and the master plots of the reduced variables eta/eta(infinity) vs t(c)gamma; at different temperatures are superimposed, which means the agreement is fair and the models are suitable to describe the rheological properties of titanium dioxide suspensions. pH effects were investigated on a Rheometrics RFS-II rheometer and it was found that pH can change the surface charge of the particles, which also affects the rheological behavior. The pH at which maximum shear viscosity and yield stress occur is in concordance with the isoelectric point. Copyright 2001 Academic Press.     

电解质水溶液在丙酸十二铵-四氯化碳溶液中的增溶

表面活性剂在非极性溶剂中形成的反胶束在催化反应、光化学、蛋白质苹取分离等方面有着广泛的应用问．这些应用与反胶束的性质有着密切的关系，而增溶水后的反胶束其形状和大小都会发生很大的变化．增溶不同水量的反胶束的微极性、酸碱性、微勤度等已有不少文献报导［2－5］．一些不溶于非极性溶剂而溶于水的物质可以溶解在非极性溶剂中的反胶束核心水团中，这个现象被称为二次增溶．其中，电解质的二次增溶对于研究配体转换反应。酶催化反应问及改变反胶束内部的微环境有着十分重要的作用，Aebi和Weibush回首先研究了有水存在时N。CI在A…     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

12-钨磷酸希土盐DMF、DMSO加合物的合成、性质及其热分解动力学常数研究

合成了8种钨磷酸希土盐LnPW₁₂O₄₀·xH₂O(Ln=Y、La、Nd、Sm、Gd、Dy、Ho、Yb)的DMF、DMSO加合物,对加合物进行了组成分析,通过IR光谱、TG-DTA曲线对加合物进行了性质表征,并着重研究了加合物热分解过程的动力学,给出了热分解反应级数n和活化能E.     

十九种长链正烷基脂肪酸的碳链骨架振动能量研究

本文通过红外光谱(FT-IR)测量数据和预测数据,计算与研究了十九种长链正烷基脂肪酸(简称脂肪酸或碳酸)的碳链骨架振动能量。结果显示出脂肪酸的碳链骨架振动能量随碳数增加呈阶梯状关系,而且脂肪酸的碳链骨架振动能量∑E出现奇偶数更迭规律。此结果可用来解释脂肪酸的熔点或熔化热呈现奇偶数更迭现象。     

Solid-phase,Pd-catalyzed silicon-aryl carbon bond formation. Synthesis of sansalvamide A peptide

A palladium-catalyzed silicon-aryl carbon bond formation on solid-phase is reported. A phenylalanine silane resin was prepared directly from protected iodo-substituted phenylalanine with butyl diethylsilane polystyrene in one step. A rapid and high-yield solid-phase synthesis of sansalvamide A peptide was achieved from the phenylalanine silane resin. [reaction: see text]     

Formation of nanostructured polymer filaments in nanochannels

We describe the use of hard etching methods to create nanodimensional channels and their use as templates for the formation of polymer filament arrays with precise dimensional and orientational control in a single integrated step. The procedure is general as illustrated by the radical, coordination, and photochemical polymerizations that were performed in these nanochannels. The nanochannel templates (20 nm high, 20-200 nm wide, and 100 mum long) were fabricated by the combined use of electron-beam lithography and a sacrificial metal line etching technique. Radical polymerization of acrylates, metal-catalyzed polymerization of norbornene, and photochemical polymerization of 1,4-diiodothiophene were carried out in these nanochannels. The polymers grown follow the dimensions and orientation of the channels, and the polymer filaments can be released without breaking. The approach opens up the possibility of just-in-place manufacturing and processing of patterns and devices from nanostructured polymers using well-established polymer chemistry.     

Enhancement of three-photon absorption cross-sections in a novel class of symmetrical charge transfer fluorene-based molecules

The three-photon absorption effect (3PA) of two novel symmetrical charge transfer fluorene-based molecules (abbreviated as BASF and BMOSF) has been determined by using a Q-switched Nd:YAG laser pumped with 38 ps pulses at 1064 nm in DMF. The measured 3PA cross-sections are 84 × 10⁻⁷⁸ and 114 × 10⁻⁷⁸ cm⁶ s², respectively. The geometries and electronic excitations of these two molecules are systematically studied by PM3 and ZINDO/S methods. The relationships between 3PA cross-sections and intramolecular charge transfer are discussed micromechanically. The experimental and theoretical results have shown that the larger intramolecular charge transfer, which was characterized by the charge density difference between the ground state (S₀) and the first excited state (S₁), the greater enhancement of the 3PA cross-sections.