硫脲掺杂金刚石的高温高压合成及FT-IR光谱研究

利用温度梯度法,在6.5 GPa、1 300～1 350℃的高温高压极端物理条件下,通过在FeNiCo-C合成体系中添加硫脲(CH4N2S)成功合成了金刚石,所合成的晶体呈现出黄色且具有六-八面体形貌.利用扫描电镜(SEM)对所合成金刚石的表面形貌进行了表征,测试结果表明,随着合成体系中CH4N2S添加量的逐渐增加,所合成金刚石的表面变得逐渐粗糙.借助傅里叶红外(FT-IR)光谱对金刚石样品内部的氮、氢缺陷以及化学键结构进行了测试分析,结果表明,金刚石中的氢元素以-CH3,-CH2-,C-H形式存在,而其内部的氮杂质以C心、A心形式存在.此外,在3 300～3 600 cm-1观察到NH的吸收带.     

静电纺丝法制备柔性SERS基底及性能研究

利用静电纺丝技术制备了聚乙烯醇(PVA)/银纳米粒子高活性SERS柔性基底.将硝酸银、聚乙烯醇按照一定比例混合配置纺丝溶液,纺丝成膜后采用紫外光照射还原法得到纳米纤维基底.采用扫描电子显微镜(SEM),透射电子显微镜(TEM),傅立叶红外光谱(FT-IR),拉曼光谱(Raman),紫外可见光谱(UV-Vis)等技术,对合成的纳米纤维基底进行表征.研究表明,银纳米颗粒呈球形分布在复合纤维中,粒径小于10 nm.以罗丹明为探针分子,硝酸银含量16 wt;,紫外光照射3 h制备的基底具备最优的SERS性能.同时将此基底应用于烟酸药品检测,拉曼检测极限可达10-5 mol·L-1.     

核壳结构CdS@C纳米复合材料的光催化性能研究

采用水热碳化法成功制备了不同碳含量的CdS@C纳米颗粒,同时对CdS@C的晶体结构、形貌、光学性能、光电化学和光催化性能进行了研究。实验结果表明本方法制备的碳包覆CdS纳米颗粒外壳为碳层,内核为六方纤锌矿结构CdS颗粒。CdS@C颗粒分散性良好,颗粒形貌主要为类球形,粒度均匀。X射线光电子能谱(XPS)证实CdS@C颗粒表面负载的碳主要以非晶碳形式存在。紫外-可见光光谱(UV-Vis)表明CdS@C纳米晶中表面碳的敏化作用提高了可见光响应范围,使得能隙变窄。光致发光光谱(PL)表明碳包覆CdS@C纳米颗粒的发光强度比纯CdS弱,有效抑制了光生载流子的复合。瞬态光电流响应和电化学阻抗谱(EIS)说明CdS@C纳米复合材料更有效促进电子-空穴对分离和提高转移效率。CdS@C纳米复合材料在可见光辐射下表现出良好的光催化活性和稳定性,其中·O₂^-和h⁺在光催化中起主要作用。     

Peridynamic modeling and simulation of coupled thermomechanical removal of ice from frozen structures

Meccanica - In this work, a bond-based peridynamic de-icing model has been developed to simulate the thermo-mechanical ice removal process of frozen structures. In the proposed numerical method,...     

A review of computational modeling and deep brain stimulation: applications to Parkinson's disease

Biophysical computational models are complementary to experiments and theories, providing powerful tools for the study of neurological diseases. The focus of this review is the dynamic modeling and control strategies of Parkinson's disease (PD). In previous studies, the development of parkinsonian network dynamics modeling has made great progress. Modeling mainly focuses on the cortex-thalamus-basal ganglia (CTBG) circuit and its sub-circuits, which helps to explore the dynamic behavior of the parkinsonian network, such as synchronization. Deep brain stimulation (DBS) is an effective strategy for the treatment of PD. At present, many studies are based on the side effects of the DBS. However, the translation from modeling results to clinical disease mitigation therapy still faces huge challenges. Here, we introduce the progress of DBS improvement. Its specific purpose is to develop novel DBS treatment methods, optimize the treatment effect of DBS for each patient, and focus on the study in closed-loop DBS. Our goal is to review the inspiration and insights gained by combining the system theory with these computational models to analyze neurodynamics and optimize DBS treatment.     

砂岩方梁断裂过程区范围的实验确定方法

裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。     

基于斜向背散射偏振拉曼光谱的{100}c-Si面内应力分析

复杂应力状态下应力分量的解耦分析对半导体的设计和制造具有重要意义。本文开展了方法学研究,首先建立了{100}晶面族单晶硅面内应力分量解耦分析模型,基于该模型,通过改变入射光和散射光的几何构型和偏振构型,可得到单晶硅拉曼频移与应力分量的解析关系。在此基础上,提出了一种利用斜向背散射偏振拉曼光谱在不同倾角、偏振方向和样品旋转角度下开展原位拉曼探测实现应力分量解耦分析的实用技术。本文通过实验验证了该方法的可靠性和适用性。     

自制环糊精衍生物毛细管柱气相色谱法分离氯苯甲醛和苯系物位置异构体

研究了自制的4根不同环糊精毛细管色谱柱对氯苯甲醛异构体的分离特性,结果表明环糊精类毛细管柱对氯苯甲醛异构体有特殊的分离性能,其中硅烷化乙酰化环糊精柱对其分离效果最佳。此外,全甲基环糊精色谱柱对酚类体系显示了很好的分离性能,硅烷化乙酰化环糊精柱对卤代甲苯体系也取得了令人满意的分离效果。     

贫燃料预混燃烧的回火特性研究

回火问题是贫燃料预混燃烧面临的主要问题之一。本文采用计算和实验相结合的方法研究甲烷与富氢合成气贫预混燃烧的回火现象,得到不同燃料、不同稳定方式之间的回火特性。研究结果表明,回火极限可以关联为丕雷数模型,环形稳定器的回火稳定性最好,其次为杆稳定器,旋流稳定器的稳定性最差;环形稳定的甲烷预混火焰的回火过程为边缘稳定,适当加入边缘空气同轴射流后变为中心回火,且同轴射流速度存在最佳范围可以提高回火稳定性。     

Enhancing sound absorption using periodic micro-perforated structure with porous layer

To get desired sound absorption,we proposed a novel periodic composite structure comprised of micro-perforated plates(MPPs),porous materials and air cavities.The composite structure is then solved using an equivalent circuit model,with equivalent fluid porous model and Maa's theory.Distributed four-pole elements are used to handle structures which are not compact compared to the sound wavelength.The model procedures are validated and confirmed as satisfactory by published results and finite-element results.Analysis conducted on a single layer shows that,compared with traditional MPP,the porous addition can increase sound absorption in the low-to-medium frequency range;however,the advantage of porous materials in the high-frequency range is lost.Meanwhile,by arranging the porous materials in parallel and controlling their filling ratios,the absorption curve of the composite structure can be tuned.As to periodic composite structures,it is found that the influence of layer number N is mainly in the low-to-medium frequency range.When N varies,the half-absorption bandwidth increases over 40%(≥380 Hz) compared with a single layer.Compared with multi-layered MPPs,N=2 and N=4 produce an increase of bandwidth by 50%(≥400 Hz) and 30%(≥300 Hz) respectively.As N increases,the sound absorption is better but the enhancement weakens as it tends to the limit of the composite structure.These results show the potential enhancements that can be made to the traditional MPP,which can benefit the research on wideband noise reduction in the low-to-medium frequency range.