七(2,3-二-O-乙酰基-6-O-叔丁基二甲基硅烷基)-β-环糊精毛细管色谱柱的研制及色谱性能

合成了七（2,3-二-O-乙酰基-6-O-叔丁基二甲基硅烷基）-β-环糊精,并采用静态法成功地将其涂渍到弹性石英毛细管柱上。研究了其气相色谱分离性能,发现此固定相涂渍性好,柱效较高,热稳定性好,对卤代芳烃异构体以及难分离的二取代苯的位置异构体具有良好的分离能力。     

偏振光的干涉场分布特征数值模拟及实验研究

从偏振光的产生出发,对不同偏振态的偏振光的干涉场分布进行了数值模拟,得出了不同偏振态干涉场的特征分布,并对不同情况进行了实验,分析讨论了实验结果,为偏振光实验的教学和实验结果的分析提供了依据.     

准静态绝热过程的简单实验实现及相关物理量的计算

介绍了利用连通器及水密封原理实现气体状态改变的简单实验装置. 根据测得的气体压缩过程的压强曲线及简单的理论分析,得出利用该装置能实现准静态绝热过程的结论;同时,对实验装置的潜在应用进行了探讨,利用初步的实验数据计算的各热学量与对应的理论值均符合很好.     

Demonstration of a 4H SiC Betavoltaic Nuclear Battery Based on Schottky Barrier Diode

A 4H SiC betavoltaic nuclear battery is demonstrated. A Schottky barrier diode is utilized for carrier separation. Under illumination of Ni-63 source with an apparent activity of 4mCi/cm^2, an open circuit voltage of 0.49 V and a short circuit current density of 29.44nA/cm^2 are measured. A power conversion efficiency of 1.2% is obtained. The performance of the device is limited by low shunt resistance, backscattering and attenuation of electron energy in air and Schottky electrode. It is expected to be significantly improved by optimizing the design and processing technology of the device.     

乙酸-乙醇汽液平衡数据的测定与关联

用小型循环式汽液平衡釜测定了常压下乙酸-乙醇二元体系的汽液平衡数据,并用Willson 方程关联实验数据,利用Willson方程进行了汽液平衡数据计算,计算结果与实验值基本吻合.     

基于混合空穴注入层的湿法制备高效蓝光热激活延迟有机发光二极管

在溶液法制备有机电致发光器件(OLEDs)的研究中, PEDOT∶PSS由于具有较好的成膜性与高透光性而常被用作器件的空穴注入层。但相关研究表明, PEDOT∶PSS本身稳定性较差以及功函数较低,这使得溶液法制备OLEDs的性能差且不稳定。蓝色作为全彩色的三基色之一,制备高效的蓝光器件对于实现高质量显示器件和固态照明装置必不可少。而目前溶液法制备蓝光OLEDs的器件效率普遍较差,针对此问题,本文利用传统的蓝光热激活延迟荧光发光(TADF)材料DMAC-DPS作为发光层,用溶液法制备了蓝光TADF OLEDs,通过在PEDOT∶PSS中掺杂PSS-Na制备混合空穴注入层(mix-HIL)来提高空穴注入层的功函数,研究其对于蓝光TADF OLEDs器件性能的影响。首先在PEDOT∶PSS水溶液中掺入不同体积的PSS-Na溶液,在相同条件下旋涂制膜,进行器件制备。通过观测各个实验组器件的电致发光(EL)光谱,发现掺入PSS-Na后器件EL谱存在光谱蓝移的现象,这是由于掺入PSS-Na水溶液后, mix-HIL层的厚度有所降低,使得在微腔效应作用下, EL光谱发生蓝移。通过对比各组器件的电流密度-电压-亮度(J-V-L)曲线及其计算所得器件的电流效率,结果显示随着PSS-Na的掺入,器件的亮度和电流都有所增大,器件的电流效率也得到了提升,当掺杂比例为0.5∶0.5(PEDOT∶PSS/PSS-Na)时提升幅度最大(亮度提升86.7%,电流效率提升34.3%)。通过在瞬态电致发光测试过程中施加或撤去驱动电压观测了器件EL强度的变化,分析了在混合空穴注入层/发光层(mix-HIL/EML)界面处的电荷积累情况。实验证明,通过在PEDOT∶PSS中掺杂PSS-Na制备mix-HIL获得了蓝光TADF OLEDs器件性能的提升,这是一个获得高效率溶液法制备OLEDs的可行方法。     

Prediction of the Frontier Electronic States in a Finite Single-wall Carbon Nanotube

A theoretical model is summarized into the shorter vector principle. It is used to predict the topological structure of wave function and the oscillation rule of energy gap in various types of finite carbon nanotubes (CNTs). The theoretical model indicates that the characteristics of the electronic states only depend on the nanotube size and its symmetry along the shorter vector direction. In this direction, the wave functions of the original 3m (or 3m/2) periodicity are also suitable for armchair, chiral and zigzag finite CNTs with the C2 (Cs), C1 and Cn point groups, respectively. Energy gaps present the oscillation with 3m (or 3m/2) or odd-even n. The first principle calculations for some prototype systems are performed. The results are consistent with the theoretical model.     

Microwave Magnetic Properties and Natural Resonance of e-Co Nanoparticles

Owing to the novel crystal structure, ε-Co nanoparticles with an average diameter of 12 nm are synthesized and the microwave magnetic properties of the epoxy resin composite with 50voi% ε-Co particles are measured in the frequency range 0.1-7 GHz. The experimental resonance frequency （4.7 GHz） matches well with the values obtained by the theoretical calculation with the Kittel equation and fitting the experimental permeability dispersion curve via the Landan-Lifshitz equation. Hence the resonance peak is attributed to natural resonance mode. This work is believed to be beneficial for further understanding microwave applications of the novel ε-Co nanoparticles.     

基于声矢量传感器的水声通信技术研究

基于声矢量传感器声压和振速联合加权处理可以提高空间处理增益的原理,将声矢量传感器应用于相位调制的高速水声通信中,并结合自适应均衡算法,研究了相干解调和解码的方法。基于声矢量传感器声强处理可以抵消各向同性干扰、提高信噪比的原理,研究了在频率调制的水声通信系统中,利用声强解码代替声压解码的方法。理论分析、仿真研究和湖上试验结果表明:利用声矢量传感器相对于声压传感器来说,可以提高解码处理增益,进而提高了水声通信系统的作用距离、降低误码率。     

The Crystallization of Poly (3-dodecyltbiophene) in an Oriented Solidification Environment

Poly (3-alkylthiophenes) (P3ATs) have made up of a family of conductive polymerswhich are soluble, fusible and processable, since the introduction of flexible alkyl sidechains"'. It is generally accepted that P3ATs can form similar layered structures. inwhich the thiophene rings possess planarity and the side chains act as spacers'-'. Whenthe number. of 'carbon atoms of alkyl side chains is more than 10, some orderlyarrangements will occur for side chains betWeen the' layers'. It has been w…