运用NMR和DFT研究Michael加成反应的动力学行为及反应机理：(CO)5W=C(OEt)C2Ph作为底物

利用核磁共振方法研究了取代吡唑对炔基Fischer卡宾化合物的Michael加成的动力学行为，该反应为典型的二级反应。当吡唑的3，5-位由较大基团取代时，反应速率常数变小，而活化焓和活化熵明显增大。利用密度泛函理论研究了炔基钨卡宾为底物的Michael加成反应机理，发现吡唑上取代基团的增大可以导致第三步反应的活化能大于第一步，从而使反应的决速步骤由原来的第一步转变为第三步。     

Addition of benzylic and allylic organozinc and Grignard reagents to resin-bound imines to provide alpha-branched secondary amines bearing a wide variety of functional groups. Utility in the synthesis of beta-3 adrenergic receptor agonists

Benzylic and allylic organozinc and Grignard reagents have been added to resin-bound imines to provide alpha-branched secondary amines. Many functional groups, including electrophilic groups, were compatible with this methodology. Three modules--a resin-bound primary amine, an aromatic aldehyde, and the organometallic--were independently varied to produce a combinatorial library of alpha-branched secondary amines designed as beta-3 adrenergic receptor agonists.     

Effect of microstructure on molecular oxygen permeation through condensed phospholipid monolayers

A method is presented that allows novel measurement of the effect of microstructure on the oxygen permeability of highly condensed, polycrystalline phospholipid monolayers. Oxygen permeability of the polycrystalline shell coating a stationary microbubble is measured directly using an apposing microelectrode in the induced transfer mode and modeling oxygen flux through the shell and intervening aqueous medium. Varying cooling rate through the phospholipid main phase transition permits control of shell microstructure by manipulation of crystalline domain size and shape. Domain boundary density, defined as the ratio of the mean domain perimeter to the mean domain area, of the microbubble shell is determined by fluorescence microscopy. Oxygen permeability was shown to increase linearly with domain boundary density at a constant phospholipid acyl chain length and, accordingly, was shown to decrease exponentially with increasing chain length at a constant domain boundary density. Modification of the energy barrier theory to account for microstructural effects, in terms of the domain boundary density, provides a general equation to model passive transport through polycrystalline monolayer films. Results from this method show promise in determining the gas transport kinetics of medical microbubbles and the gas exchange characteristics of biological monolayers.     

Colorimetric anion chemosensor based on 2-aminobenzimidazole: naked-eye detection of biologically important anions

We synthesized a novel colorimetric anion chemosensor bearing benzimidazole motifs as recognition sites in the pods of the receptor. The addition of tetrabutylammonium salts of F⁻ or AcO⁻ to the solution of receptor caused dramatic color changes from colorless to yellow, which was clearly visible to the naked eye. The receptor showed no significant changes on addition of other anions such as Cl⁻, Br⁻, I⁻, NO₃⁻, and H₂PO₄⁻.     

Crystal structure and the standard molar enthalpy of formation of a coordination polymer [Cu(nip)(phen)]n

A coordination polymer [Cu(nip)(phen)]_n was hydrothermally synthesized by the reaction of Cu(NO₃)₂ with 5-nitroisophthalic acid and phen. Single-crystal structure analysis showed that the complex crystallized in the monoclinic space group P2₁/c; a = 10.6566(13); b = 12.5931(15); c = 13.0514(16) Å; β = 95.474(2)°, V = 1743.5(4) Å³; Z = 4. The standard molar enthalpy of formation of the complex was determined to be −554 ± 11 kJ mol⁻¹.     

单分散磁性P(St/BA/MAA)微球的制备

在共沉淀法合成超细磁流体的基础上 ,以苯乙烯 (St)、丙烯酸丁酯 (BA)和甲基丙烯酸 (MAA)为共聚单体 ,在不同的介质体系中采用无皂乳液聚合法制备了单分散 ,粒径范围为 80～ 2 30nm的磁性P(St BA MAA)微球 .详细探讨了介质极性、磁流体中表面活性剂含量对磁性高分子微球粒径和单分散性的影响 .实验结果表明 ,在一定范围内随介质极性降低 ,磁性高分子微球的单分散性提高 ,随表面活性剂用量增加 ,单分散性变差 .总体来看 ,磁性高分子微球的单分散性与其表面静电斥力密切相关 ,过大或过小的静电斥力均会导致磁性高分子微球单分散性的降低 .     

3D－QSAR Study on Diindolylmethane and Its Analogues with Comparative Molecular Field Analysis(CoMFA)

Comparative molecular field analysis (CoMFA),a three dimensional quantitative structure-activity relationship (3D-QSAR) method was applied to a series of diindolylmethane(DIM) analogs to study the relationship between their structure and their induction of CYP 1A1-associated ethoxyresorufin-O-deethylase(EROD) activity.A DISCO model of pharmacophore was derved to guide the superposition of the compounds.The coefficient of cross-validation (q^2) and non cross-validation(r^2) for the model established by the study are 0.827 and 0.988 respectively,the value of variance ratio (F) is 103.53 and standard error estimate (SEE)is 0.044.These values indicate that the CoMFA model derived is significant and might have a good prediction for the catalytic activity of DIM compounds.As a consequence,the predicted activity values of new designed compounds were all higher than that of the reported value.     

Novel Pb(II), Zn(II), and Cd(II) coordination polymers constructed from ferrocenyl-substituted carboxylate and bipyridine-based ligands

Treatment of two kinds of ferrocenyl-substituted carboxylate ligands (3-ferrocenyl-2-crotonic acid, HOOC-CH=(CH(3))CFc (Fc=(eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4))) or O-ferrocecarbonyl benzoic acid, o-HOOCC(6)H(4)COFc with Pb(OAc)(2).3H(2)O, Zn(OAc)(2).2H(2)O, or Cd(OAc)(2).2H(2)O) resulted in four novel ferrocene-containing coordination polymers [[Pb(mu(2)-eta(2)-OOCCH=(CH(3))CFc)(2)].MeOH](n) (1), [[Zn(o-OOCC(6)H(4)COFc)(2)(4,4'-bipy)(H(2)O)(2)].2MeOH.2H(2)O](n) (4,4'-bipy = 4,4'-bipyridine) (2), [[Cd(o-OOCC(6)H(4)COFc)(2)(bpe)(MeOH)(2)].2H(2)O](n) (bpe = 1,2-bis(4-pyridyl)ethene) (3), and [Pb(o-OOCC(6)H(4)COFc)(eta(2)-o-OOCC(6)H(4)COFc)(bpe)](n)() (4). Their crystal structures have been characterized by single X-ray determinations. In polymer 1, Pb(II) ions are bridged by tridentate FcC(CH(3))=CHCOO(-) anions, forming an infinite chain [Pb(mu(2)-eta(2)-OOC=CH(CH(3))CFc)(2)](n). In polymers 2-4, there are three kinds of components, metal ions, o-FcCOC(6)H(4)COO(-) units, and organic bridging ligands. The bipyridine-based ligands connect metal ions leading to a one-dimensional chain with o-FcCOC(6)H(4)COO(-) units acting as monodentate or chelate ligands in the side chain. Such coordination polymers containing ferrocenyl-substituted carboxylate and bipyridine-based ligands are very rare. The solution-state differential pulse voltammetries of polymers 1-4 were determined. The results indicate that the half-wave potential of the ferrocenyl moieties is influenced by the Pb(II) ions in polymer 1 and strongly influenced by Zn(II), Cd(II), or Pb(II) ions in polymers 2-4. The thermal properties of the four polymers were also investigated.     

Mechanisms of methane activation and transformation on molybdenum oxide based catalysts

We present a comprehensive survey of different C-H activation pathways over various kinds of active sites of terminal oxygens [=O] and bridge oxygens [-O-] by using Mo3O9 model systems. This allows us to provide some insights into fundamental issues concerning C-H activation by metal oxo species involved in many heterogeneous, homogeneous, and enzymatic processes. We show that H abstraction is the most feasible reaction pathway for the activation of a C-H bond on molybdenum oxides; and that [=O] is more active than [-O-]. Our calculations also suggest that (2+2) can be an alternative if M=O bond possesses a high polarity, while (5+2) can provide another effective pathway if two M=O bonds are in close proximity. Implications for the related heterogeneous, homogeneous, and enzymatic processes are discussed.     

Curing behavior and toughening performance of epoxy resins containing hyperbranched polyester

The effects of the hyperbranched polyester with hydroxyl end groups (HBPE‐OH) on the curing behavior and toughening performance of a commercial epoxy resin (diglycidyl ether of bisphenol A, DGEBA) were presented. The addition of HBPE‐OH into DGEBA strongly increased its curing rate and conversion of epoxide group due to the catalytic effect of hydroxyl groups in HBPE‐OH and the low viscosity of the blend at curing temperature. The improvements on impact strength and critical stress intensity factor (or fracture toughness, K_1c) were observed with adding HBPE‐OH. The impact strength was 8.04 kJ m^?1 when HBPE‐OH reached 15 wt% and the K_1c value was approximately two times the value of pure epoxy resin when HBPE‐OH content was 20 wt%. The morphology of the blends was also investigated, which indicated that HBPE‐OH particles, as a second phase in the epoxy matrix, combined with each other as the concentration of HBPE‐OH increased. Copyright © 2004 John Wiley & Sons, Ltd.