Single electron emission from the closed-tips of single-walled carbon nanotubes

The single electron emission behaviors and characteristics from the well-defined quantized energy levels, corresponding to localized electronic states at the dome-structure tips, in single-walled carbon nanotubes (SWNTs) are investigated and illuminated by use of the energy level emission model in combination with the first-principles calculations on the electronic structures. Under the external electric field, the confined electrons are emitted simultaneously from each quantized energy level by virtue of the resonant tunneling effects. With increasing applied voltage, the emission current increases monotonically and exponentially up to the first peak value, and then steps into the increasing and decreasing "sawtoothlike" variations in sequence. The negative differential resistance or conductivity and the maximum current for SWNTs are simulated. The influences of localized electronic states and curvatures of the different closed tips on the single electron emission behaviors of SWNTs are evaluated and discussed. Also a few issues and applications relevant to electron emission of carbon nanotubes are addressed.     

Configuration of MFI-type zeolite interacting with the probe molecule P(CH<Subscript>3</Subscript>)<Subscript>3</Subscript> – a theoretical study

With P(CH₃)₃ as the probe molecule adsorbed on titanium silicalite (TS-1) zeolite, the special and important role of T12 site in MFI-type zeolite was clearly elucidated. There are altogether three active sites present in TS-1 zeolite with Ti at the T12 site. Owing to the preferential adsorption of probe molecules on the first Brönsted acidic site, the Ti12 center will probably fail to show Lewis acidity. The ionic [HP(CH₃)₃]⁺ species can be stabilized by the first or second Brönsted acidic site, with the former energetically favored. The latter was formed through the transfer of the ionic [HP(CH₃)₃]⁺ species from the first to the second Brönsted acidic site.     

铜掺杂五氧化二钒的制备及电化学性质

采用沉淀法于300 和600 ℃制备了结晶状的Cu0.04V2O5材料. 扫描电镜显示, 300 ℃时制备的样品具有多孔特征, 而600 ℃时制备的样品具有很高的结晶度. X射线研究表明, 少量铜掺杂不会改变V2O5的正交晶体结构. 红外光谱研究表明, 300 ℃时制备的Cu0.04V2O5样品含有少量水. 热失重分析确定了样品中所含水分是以吸附水的形式存在, 1 mol材料分子吸附水的摩尔数约为0.18 mol. 铜掺杂显著改善了V2O5的结构稳定性, 进而提高了材料的充放电循环性能. 于600 ℃制备的样品在C/5.6倍率下具有160 mAh·g-1的可逆比容量, 但提高放电倍率明显降低了材料的循环性能. 于300 ℃制备的样品在C/5.6倍率时的循环性能不如600 ℃样品, 但该材料在C/1.9倍率时仍具有100 mAh·g-1左右的可逆比容量. 两种材料在电化学性能上的差异与材料的微结构有关. 低温样品在较高放电倍率时良好的循环性能得益于其多孔的微结构, 而高温样品由于其较高的结晶度而表现出优异的低倍率充放电性能.     

α-Al2O3纳米粒子对Co-Ni合金异常共沉积电化学行为的影响

为了研究在电化学复合共沉积过程中,惰性纳米粒子和金属离子、电极表面的相互作用,以及由此产生的对合金电化学共沉积行为的影响.本文从两个吸附过程出发: 电解液中的金属离子和H＋在纳米粒子表面的吸附；纳米粒子迁移到阴极表面,在电极表面的吸附.采用Zeta电势和稳态极化以及电化学交流阻抗（EIS）研究了纳米Al2O3粒子和电解液中的金属离子，和电极表面的相互作用,进而分析了纳米粒子对Co2＋和Ni2＋还原沉积的影响规律.通过对阻抗数据的拟合,讨论了Al2O3纳米粒子对等效电路中各物理参数的影响.在H＋和不同金属离子在纳米粒子上发生竞争吸附的基础上,提出了纳米粒子和合金共沉积的可能反应历程.     

Preparation of conductive polypyrrole (PPy) composites under supercritical carbon dioxide conditions

Electrically conductive composites were prepared via the chemical oxidative polymerization of the pyrrole monomer in polystyrene (PS) and zinc neutralized sulfonated polystyrene (Zn-SPS) films under supercritical carbon dioxide (SC-CO₂) conditions. The strong swelling effect of SC-CO₂ made polypyrrole (PPy) particles not only form on the surface, but also become incorporated into the film, resulting in a homogeneous structure with a relatively higher conductivity. By comparison, the composite prepared in aqueous solutions shows a skin-core structure and a conductivity of 3 to 4 orders of magnitude lower than that of the former due to the diffusion-controlled process of the pyrrole monomer. The percolation thresholds of PS/PPy and Zn-SPS/PPy composites were 6.2% and 2.7% of the volume fraction of PPy, respectively, much lower than the theoretically predicted value of 16%. Moreover, the conductive composites prepared under SC-CO₂ conditions showed higher thermal stability, especially in the high-temperature region. Translated from Chemical Journal of Chinese Universities, 2006, 27(4): 771–774 (in Chinese)     

纳米硫化镉修饰玻碳电极对血红蛋白的直接电化学和生物电催化

0IntroductionStudies of direct electrochemistry of proteins orenzymes at electrodes can serve as a basis for build-ing electrochemical biosensors,enzymatic bioreactors,and biomedical devices[1].This approach simplifiessuch devices without using mediators and is of partic-ular significance for fabricating the third generationbiosensors[2].For example,if a protein or enzyme im-mobilized on electrode surface is capable of directelectron transfer without loss of bioactivities,it can beused in the …     

介孔分子筛MCM-48的室温合成与表面修饰

在室温条件下的碱性介质中合成了介孔分子筛MCM-48，并对其进行了有机官能团表面修饰。利用HRTEM、低温N₂吸附、XRD、TG、IR和NMR等手段对产物进行了结构和性能分析。实验结果表明，合成产物MCM-48具有规则的孔道结构、大比表面积、大孔容和窄分布的孔径。由硅烷试剂表面修饰后的MCM-48，由于有机官能团接枝在MCM-48的内表面，占据了孔道内部空间，使其比表面积、孔容和孔径都减小。     

Highly flexible polyelectrolyte nanotubes

A pressure-filter-template approach was employed to prepare polyelectrolyte nanotubes through layer-by-layer deposition in the alumina template. With the thicker wall, the ordered polymer nanotubes possess a high flexibility. The results demonstrate that the electrostatic interactions of polyelectrolytes play a key role in fabricating water-soluble charged polymer nanotubes. The structure of the polyelectrolyte nanotube was confirmed by SEM, TEM, and UV, respectively.     

Streamlined construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation in solution and on DNA

A highly efficient and versatile method for construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation of alkyl and aryl thiols with aryl iodides under mild conditions is developed. The method exhibits a broad substrate scope for thiols, aryl iodides and amino acid units. Peptide macrocycles of a wide range of size and composition can be readily assembled in high yield from various easily accessible building blocks. This method has been successfully employed to prepare an 8-million-membered tetrameric cyclic peptide DNA-encoded library (DEL). Preliminary screening of the DEL library against protein p300 identified compounds with single digit micromolar inhibition activity.

A highly efficient and versatile method for construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation of alkyl and aryl thiols with aryl iodides under mild conditions is developed.     

高中有机化学教材“烃类化合物”的国际比较研究

基于闫春更等建立的二维度四指标教材难度微观评价模型，重点对中国、美国、新加坡、澳大利亚、日本、英国的高中化学教材中"烃类化合物"内容的整合广度、表征深度进行测评和比较。研究发现6国教材内容的整合广度整体上差异不大，但其表征深度差异明显；美国教材注重学生认识物质的思路和方法的渗透，日本教材注重基本知识与技能的掌握，中国教材将概念诠释与样例分析相融合；英国、新加坡、美国教材注重情境推理或比较等信息处理策略的运用，对学习者学习的引导性较强。