Ab initio stochastic optimization of conformational and many-body degrees of freedom

Moderate to large size molecules in solution have complex energy surfaces due to intramolecular (conformational) and intermolecular (many-body) interactions. The first principles Monte Carlo (FPMC) method, previously shown to effectively locate minimum-energy structures for systems with only many-body complexity, has been extended to address conformational flexibility by adding three new Monte Carlo move types. The primary advantage of the FPMC method is the ability to efficiently locate minimum energy structures of molecules with conformational flexibility in the presence of explicit solvent molecules using highly accurate quantum chemical calculations. The additions to FPMC were validated by studying conformers of glycerol, glyceraldehyde, and a large humic acid monomer unit. The structure of glyceraldehyde in the presence of one and two water molecules was also explored to demonstrate the power of FPMC to study systems with both conformational and many-body degrees of freedom.     

Chloration d'un polyethylene ramifie influence de la temperature et du solvant

The chlorination of branched high-pressure polyethylenes, promoted by u.v. at various temperatures in carbon tetrachloride and 1,1–2,2 tetrachloroethane, has been studied. It has been possible to elucidate the influence of the temperature and the nature of the solvent on the characteristics of the chlorinated polymers.The chlorination is more efficient in carbon tetrachloride, where the efficiency of the u.v. is not affected by the medium.At the same degree of chlorination, the chain-breaking mechanisms are more important in carbon tetrachloride than in tetrachloroethane; they increase when the temperature of the medium increases. The chlorine-saturated polyethylene obtained in carbon tetrachloride is richer in 1,2 dichloroethylene sequences.Below 60°, the yield of chlorinated polymer is the same in the two solvents. Chlorination at higher temperature in tetrachloroethane does not improve the structural regularity or the yield of the chlorine-saturated polyethylenes.     

Multi-step polymer-assisted solution-phase (PASP) library synthesis of functionalized diaminobenzamides

A parallel solution-phase library synthesis of functionalized diaminobenzamides is described. The four-step library synthesis is accomplished using polymer-assisted solution-phase (PASP) synthesis techniques. This high-yielding, multi-step sequence utilizes sequestering resins for the removal of reactants, reactant by-products, and employs a resin capture/release strategy as a key library synthesis step. Step one of the sequence relies on the displacement of an activated fluoro-group from the aromatic ring of 1a, b with a variety of primary amines to introduce the first diversity position. Step two is hydrolysis of the benzoate ester to a benzoic acid which is subsequently captured on a polyamine resin, washed, and released to give 4a, b in pure form. Step three utilizes PASP resins to mediate the amide coupling of a benzoic acid with a variety of primary amines to give the aminonitrobenzamides 5a, b and introduces the second diversity position. Step four is the parallel reduction of the aminonitrobenzamides 5a, b to the functionalized diaminobenzamides 6a, b. This library synthesis proceeds with high overall purities which average 80 % over the 4-step sequence.     

Quantitative determination of glutathione in single human erythrocytes by capillary zone electrophoresis with electrochemical detection

Glutathione (GSH) in single human erythrocytes is determined by capillary zone electrophoresis with end-column amperometric detection at a gold/mercury amalgam microelectrode. A capillary of 10 microm inner diameter is suitable for determination of GSH in an individual erythrocyte with a good signal-to-noise ratio. The limit of detection is 1 x 10(-7) mol/L or 26 amol and the linear dynamic range is 2 x 10(-7) to 2 X 10(-5) mol/L for the capillary. In this method, the calibration line is obtained with a capillary adsorbed before a certain amount of hemoglobin can be used for the quantification of GSH in the external standardization. The whole cell injection and the lack of necessity of a derivatization reaction lead to more accurate and precise results, which are closer to the macroscopic values of glutathione in human red blood cell (i.e., hemolysate) than those determined by indirect laser-induced fluorescence detection.     

Development of a new reaction system for the synthesis of highly optically active alpha,gamma-substituted gamma-butyrolactones

A highly useful method for the synthesis of optically active alpha,gamma-substituted gamma-butyrolactones has been developed. The SmI(2)-induced reductive coupling of chiral 2-alkyl acrylates derived from isosorbide with ketones in the presence of (1S)-(-)-2,10-camphorsultam as a proton source give the chiral alpha,gamma-substituted gamma-butyrolactones in good yields and high enantiomeric purities (up to >99% ee for trans and 75% ee for cis). The reaction system has been investigated with various ketones, and it is demonstrated that this system is very effective for trans-alpha,gamma-substituted gamma-butyrolactones. Both the chiral auxiliary and the hindered proton source in this system are necessary for the observed excellent ee values of the products. The absolute configuration of the trans products is assigned on the basis of the X-ray crystal structure.     

PHOTOTRANSFORMATION KINETICS OF UNDEGRADED OAT AND PEA PHYTOCHROME INITIATED BY LASER FLASH EXCITATION OF THE RED-ABSORBING FORM

Abstract— Phototransformation at 2°C of the red-absorbing form of phytochrome (Pr) to the far-redabsorbing form (Pfr) was studied with both undegraded oat ( Avena sativa L., cv. Garry) and undergraded pea Pisum sativum L., cv. Alaska) phytochrome. Phototransformation was initiated by a 15-ns laser pulse with maximum emission near 600 nm and output power of 30 mJ. The first resolvable transformation intermediate exhibited relative to Pr a maximum absorbance increase near 700 nm and was fully present at the earliest time measured, which was 60 ns after the flash. This intermediate absorbance decayed by two reactions for oat phytochrome (half-lives of 11 and 140 μs assuming parallel reactions) and by three for pea phytochrome (half-lives of 14, 280 and 1600 μs assuming parallel reactions). The kinetics of the slowest reaction for pea phytochrome, however, might be somewhat distorted by an instrument artifact. The appearance of the far-red-absorbing phytochrome, as monitored by absorbance increase at 720 nm, occurred by at least two reactions for both oat (half-lives of 47 and 250 ms assuming parallel reactions) and pea (half-lives of 170 and 770 ms assuming parallel reactions) phytochrome. The possibility of slower reactions was not tested. Assays for possible proteolysis of the phytochrome samples studied here indicated that the presence of degraded phytochrome could not account for the observed multiphasic kinetics except possibly for one phase of the triphasic intermediate decay seen with pea phytochrome.     

Experiments in mixed-integer linear programming using pseudo-costs

This paper discusses heuristic branch and bound methods for solving mixed integer linear programming problems. The research presented on here is the follow on to that recorded in [3].After a resumé of the concept of pseudo-costs and estimations, new heuristic rules for generating a tree which make use of pseudo-costs and estimations are presented. Experiments have shown that models having a low percentage of integer variables behave in a radically different way from models with a high percentage of integer variables. The new heuristic rules seem to apply generally to the first type of model.Later, other heuristic rules are presented that are used with models having a high percentage of integer variables and with models having a special structure (models including special ordered sets.)The rules introduced here have been implemented in the IBM Mathematical Programming System Extended/370. They are used to solve large mixed integer linear programming models.Numerical results that permit comparisons to be made among the different rules are provided and discussed.     

Br2 in an ar matrix: an example of complete damping of the resonance raman scattering amplitude in the discrete resonance limit

Raman scattering and relaxed fluorescence is observed upon cw laser excitation resonant with the lower vibrational manifold of the X(¹Σ_o+u) → B(³Π_o+u) transition of matrix isolated Br₂ at liquid He temperatures. The excitation profile of the relaxed fluorescence maps out the resonances, but neither detectable enhancement of Raman scattering nor resonance fluorescence is observed.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

Native and stearic acid modified ceria-zirconia supports in normal and reversed-phase HPLC

Porous ceria-zirconia composite with narrow particle size distribution and large specific surface area was synthesized by a sol-gel process. Chromatographic properties of the native supports was investigated in normal phase mode for the separation of test mixtures of basic, neutral and acidic compounds. The new packing material exhibited polar and basic properties, which are suitable for the separation of basic compounds. Lypophilic packing has been obtained by the modification of the ceria-zirconia with stearic acid, which exhibited strong hydrophobicity relative to the native packing. Therefore, the modified ceria-zirconia behaves as a reversed-phase packing material. Different selectivity towards basic compounds was observed on the new packing compared to the native ceria-zirconia and conventional ODS stationary phase.