Quantitative determination of glutathione in single human erythrocytes by capillary zone electrophoresis with electrochemical detection

Glutathione (GSH) in single human erythrocytes is determined by capillary zone electrophoresis with end-column amperometric detection at a gold/mercury amalgam microelectrode. A capillary of 10 microm inner diameter is suitable for determination of GSH in an individual erythrocyte with a good signal-to-noise ratio. The limit of detection is 1 x 10(-7) mol/L or 26 amol and the linear dynamic range is 2 x 10(-7) to 2 X 10(-5) mol/L for the capillary. In this method, the calibration line is obtained with a capillary adsorbed before a certain amount of hemoglobin can be used for the quantification of GSH in the external standardization. The whole cell injection and the lack of necessity of a derivatization reaction lead to more accurate and precise results, which are closer to the macroscopic values of glutathione in human red blood cell (i.e., hemolysate) than those determined by indirect laser-induced fluorescence detection.     

Sorption of 241Am by Aspergillus nigerspore and hyphae

Biosorption of ²⁴¹Am by a fungus A. niger, including the spore and hyphae, was investigated. The preliminary results showed that the adsorption of ²⁴¹Am by the microorganism was efficient. More than 96% of the total ²⁴¹Am could be removed from ²⁴¹Am solutions of 5.6-111 MBq/l (C _o) by spore and hyphaeof A. niger, with adsorbed ²⁴¹Am metal (Q) of 7.2-142.4 MBq/g biomass, and 5.2-106.5 MBq/g, respectively. The biosorption equilibrium was achieved within 1 hour and the optimum pH range was pH 1-3. No obvious effects on ²⁴¹Am adsorption by the fungus were observed at 10-45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above the ²⁴¹Am concentration. The ²⁴¹Am biosorption by the fungus obeys the Freundlich adsorption equation. There was no significant difference between the adsorption behavior of A. nigerspore and hyphae. This revised version was published online in July 2006 with corrections to the Cover Date.     

A zwitterion of 1,5‐bis­(2‐hydroxy­benzamido)‐3‐aza­pentane: a two‐dimensional hydrogen‐bonding network involving dimers

The title compound, 2‐{N‐[2‐(2‐hydroxy­benzamido)ethyl­ammonio­ethyl]amino­carbon­yl}phenolate, C₁₈H₂₁N₃O₄, crystallizes in a zwitterionic form as a result of inter­molecular proton transfer and possesses a negatively charged phenolate group and a protonated amino group. The 2‐hydroxy­benzamide and 2‐(amino­carbonyl)­phenolate moieties attached to the two ends of the C—C—N—C—C backbone adopt a cis conformation in relation to this backbone. All N‐ and O‐bound H atoms are involved in hydrogen‐bond formation; the zwitterions are first linked into head‐to‐tail dimers, which are further organized into a two‐dimensional network parallel to the crystallographic bc plane.     

Development of a new reaction system for the synthesis of highly optically active alpha,gamma-substituted gamma-butyrolactones

A highly useful method for the synthesis of optically active alpha,gamma-substituted gamma-butyrolactones has been developed. The SmI(2)-induced reductive coupling of chiral 2-alkyl acrylates derived from isosorbide with ketones in the presence of (1S)-(-)-2,10-camphorsultam as a proton source give the chiral alpha,gamma-substituted gamma-butyrolactones in good yields and high enantiomeric purities (up to >99% ee for trans and 75% ee for cis). The reaction system has been investigated with various ketones, and it is demonstrated that this system is very effective for trans-alpha,gamma-substituted gamma-butyrolactones. Both the chiral auxiliary and the hindered proton source in this system are necessary for the observed excellent ee values of the products. The absolute configuration of the trans products is assigned on the basis of the X-ray crystal structure.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.     

Biosorption of americium-241 by Saccharomyces cerevisiae

The biosorption of radionuclide ²⁴¹Am from solution by Saccharomyces cerevisiae (S. cerevisiae), and the effects of experimental conditions on the adsorption were investigated. The preliminary results showed thatS. cerevisiae is a very efficient biosorbent. An average of more than 99% of the total ²⁴¹Am could be removed by S. cerevisiae of 2.1 g/l (dry weight) from ²⁴¹Am solutions of 17.54–4386.0 mg/l (2.22 MBq/l–555 MBq/l) with adsorption capacities of 7.45–1880.0 mg/g biomass (dry weight) (0.94 MBq/g–237.9 MBq/g). The adsorption equilibrium was achieved within 1 hour and the optimum pH ranged 1–3. No significant differences on ²⁴¹Am adsorption were observed at 10–45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above ²⁴¹Am concentration. The relationship between concentrations and adsorption capacities of ²⁴¹Am indicated the biosorption process should be described by the Freundlich adsorption isotherm.     

Native and stearic acid modified ceria-zirconia supports in normal and reversed-phase HPLC

Porous ceria-zirconia composite with narrow particle size distribution and large specific surface area was synthesized by a sol-gel process. Chromatographic properties of the native supports was investigated in normal phase mode for the separation of test mixtures of basic, neutral and acidic compounds. The new packing material exhibited polar and basic properties, which are suitable for the separation of basic compounds. Lypophilic packing has been obtained by the modification of the ceria-zirconia with stearic acid, which exhibited strong hydrophobicity relative to the native packing. Therefore, the modified ceria-zirconia behaves as a reversed-phase packing material. Different selectivity towards basic compounds was observed on the new packing compared to the native ceria-zirconia and conventional ODS stationary phase.     

Synthesis and optical resolution of a series of inherently chiral calix[4]crowns with cone and partial cone conformations

A series of inherently chiral calix[4]arenes with cone and partial cone conformations and with crown ether moieties of variable size have been readily synthesized. By taking advantage of the carboxy appendage on the lower rim, these were condensed with the chiral auxiliary (S)-BINOL to form diastereomers which, in most cases, could be separated by preparative TLC, or more desirably, by column chromatography on silica gel (diastereomeric excess >99 % based on HPLC analysis). Seven enantiopure antipodes of inherently chiral calix[4]crowns were obtained after hydrolysis. It has been found that both the size of the crown moiety and alkylation of the last phenolic hydroxy group (accompanied with or without a change in the conformation) affect the separation of the diastereomers.     

Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.