Asymmetric molecular harmonic assisted generation of the attosecond X-ray pulse

In this paper, we theoretically investigate the asymmetric molecular high-order harmonic emission and the attosecond X-ray pulse generation when the asymmetric molecular HeH²⁺ ion is exposed to an intense chirped pulse. It is found that the molecular harmonics are strongly dependent on the internuclear distance R as well as the chirp parameter, showing a smooth and intense harmonic plateau at R = 8.0 a.u. and β = 0.4. Further, by adding a subharmonic controlling pulse with the optimised conditions, a supercontinuum with a bandwidth of 602 eV can be obtained. Finally, by properly superposing the selected harmonics in the supercontinuum region, a series of isolated X-ray pulses with durations of sub-80 as are directly generated.     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

“Eigen-Operator” Method of the Square of Schroedinger Operator in Interaction Picture and Its Application in Describing Parametric Amplifiers

We extend the method of searching “eigen-operator” of the square of the Schroedinger operator to the interaction picture, which not only helps to construct Hamiltonians of two kinds of parametric amplifiers but also leads to a new uncertainty relation regarding to the free Hamiltonian and the interacting Hamiltonian.     

Polarity switching and transient responses in single nanotube nanofluidic transistors

We report the integration of inorganic nanotubes into metal-oxide-solution field effect transistors (FETs) which exhibit rapid field effect modulation of ionic conductance. Surface functionalization, analogous to doping in semiconductors, can switch the nanofluidic transistors from p-type to ambipolar and n-type field effect transistors. Transient study reveals the kinetics of field effect modulation is controlled by ion-exchange step. Nanofluidic FETs have potential implications in subfemtoliter analytical technology and large-scale nanofluidic integration.     

Short-length microstructured phosphate glass fiber lasers with large mode areas

We report fabrication and testing of the first phosphate glass microstructured fiber lasers with large Er-Yb-codoped cores. For an 11-cm-long cladding-pumped fiber laser, more than 3 W of continuous wave output power is demonstrated, and near single-mode beam quality is obtained for an active core area larger than 400 microm2.     

Thermally switchable and discretely tunable comb filter with a linearly chirped fiber Bragg grating

We propose and experimentally demonstrate a novel switchable and discretely tunable comb filter based on a thermally induced linearly chirped fiber Bragg grating. Experimentally we achieved a thermally induced optical bandpass filter that has eight switchable passband peaks with peak separations of 1.6 and 3.2 nm, a very narrow bandwidth (as small as 10 pm) of each peak, a tunable range of 16.5 nm, and a greater than 25 dB rejection ratio. Two spectral peaks separated by only 0.8 nm were also obtained with this comb filter. This filter provides the unique advantages of an all-fiber structure, switchable spectral peaks, independent tuning of the center wavelength and wavelength spacing of the spectral peaks, low polarization sensitivity, simple structure, ease of fabrication, and low cost.     

Graphitization of activated carbon under high pressures and high temperatures

Activated carbon was treated at 5.0 GPa up to 1600 ^°C and the structural evolution in the graphitization process was investigated. The graphitization temperature is reduced to 1200 ^°C at 5 GPa, as reflected by x-ray diffraction patterns. Honeycomb-like structures come into being in the high-pressure sintering temperature range of 1000–1100 ^°C and slice-like structures appear after graphitization. Raman frequency and half width drop drastically near the graphitization temperature, and the appearance of D and D′ lines indicates there are still some disorder structures in the graphitized activated carbon.     

Narrow Linewidth Tm:YLF Laser with Volume Bragg Grating Dual-End-Pumped by Equidirectional-Polarization Fiber-Coupled Laser Diode

We demonstrate a narrow linewidth Tm:YLF laser with a volume Bragg grating (VBG) that was pumped by an equidirectional-polarization fiber-coupled laser diode using a dual-end-pumping configuration. For an optimized output coupler with a radius of curvature of 150 mm and transmission of 15% at a wavelength of 1.91 μm, the maximum output power was 15.6 W for an absorbed pump power of 51.7 W at 1,907.93 nm, and the output had a narrow linewidth of 0.22 nm. This corresponds to an optical-to-optical conversion efficiency of 30.2% and the slope efficiency was 36.7%.     

Orientation dependence of the electrocaloric effect of ferroelectric bilayer thin films

An analytical thermodynamic theory is applied to investigate the electrocaloric effect of ferroelectric BaTiO₃/SrTiO₃ bilayer thin films with different orientations at room temperature. Theoretical analysis indicates that the strong electrostatic coupling between the layers results in the suppression of ferroelectricity at a critical relative thickness which occurs approximately at 50%, 23%, and 12% of SrTiO₃ fraction in the (001), (110), and (111) bilayer thin films, respectively. The ferroelectric bilayer thin films are respected to have the largest electrocaloric effect at this critical relative thickness. Moreover, the electrocaloric effect strongly depends on the orientation and the (110) oriented bilayer thin films have the largest electrocaloric effect. Consequently, control of the orientation and the relative thickness of SrTiO₃ layer can be used to adjust the electrocaloric effect of ferroelectric bilayer thin films, which may provide the potential for practical application in refrigeration devices.