A general approach to cyathin diterpenes. Total synthesis of allocyathin B(3)

[reaction: see text] The synthesis of allocyathin B(3) from an advanced intermediate possessing the ring system and relative stereochemistry but lacking the isopropyl and hydroxymethyl groups is reported. The isopropyl group was introduced by radical cyclization of a methyl propargyl acetal of an alpha-bromo ketone, and the hydroxymethyl group was generated by Pd-catalyzed carbonylation of a vinyl triflate. The route provides functionalized intermediates that could allow access to more complex members of the cyathin family of diterpenes.     

Voltammetry and electrocatalytic properties of cobalt (1,4,8,12-tetraazacyclopentadecane) in aqueous solution

Summary The spectrochemical, electrochemical and electrocatalytic properties of Co[15]aneN₄ ([15]aneN₄ = 1,4,8,12-tetraazacyclopentadecane) have been investigated. The results show that, in aqueous solution, this compound mainly exists as three species whose axial coordination positions are occupied by water and/or hydroxy ligands; it is marginal whether other substrates such as Cl^– and NO _inf3 ^sup– interact with the central ion in acid-base solutions. The approximate Pourbaix diagram of Co^III/II[15]ane N₄ was determined. There is an electrochemically-induced isomerization between two trans conformational isomers of the Co[15]aneN₄ complexes in acid and netural solutions. The Co[15]aneN₄ complex has electrocatalytic properties for reduction of nitrate and nitrite only in strong alkaline solution.     

二氢茉莉酮酸甲酯的简便合成方法

本文报道二氢茉莉酮酸甲酯的简便合成方法。先由丁二酸和庚酰氯反应得到2-戊基-1,3-环戊二酮(1),再用甲醇醚化1,可得到2-戊基-3-甲氧基-环戊-2-烯酮(2)。2与丙二酸二甲酯反应生成(2-戊基-3-酮-1-环戊烯-)基乙酸甲酮(3)。最后,催化氢化3,便可得到二氢茉莉酮酸甲酯(4)。     

Electrical activity of dislocations: Prospects for practical utilization

The electrical activity of interfacial misfit dislocations in silicon has been examined using the electron beam induced current technique (EBIC) in a scanning electron microscope. Clean misfit dislocations, i.e. no EBIC contrast, formed during high-temperature Si(Ge) chemical vapor epitaxy were studied. These defects were subsequently decorated with known metallic impurities (Au and Ni) by diffusion at 400° C to 1130° C from a back-side evaporated layer. Qualitative analysis of the electrical activity in relation to the energy levels anticipated for the clean or decorated dislocations is presented. Of particular interest is the case of defect-induced conductivity type inversion which occurred both at the top surface and at the buried dislocated interfaces of the multilayer. The prospects for using dislocations in a beneficial manner as active elements in electronic devices are discussed.     

A note on differentiability of the cluster density for independent percolation in high dimensions

The cluster density function of independent percolation in ad-dimensional lattice is considered. For eachn, it is shown that(p) has finitenth leftderivative at critical probabilityp _c ifd is sufficiently large. This result agrees with the Bethe lattice approximation, where thenth one-sided derivative of(p) is bounded atp _c for alln.     

Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

Simplified Labeling Approach for Synthesizing 3′-Deoxy-3′-[18F]fluorothymidine ([18F]FLT)

[¹⁸F]FLT (3-deoxy-3-[¹⁸F]fluorothymidine) turned out to be a tracer particularly suitable for PET imaging of tumor proliferation because of lacking degradation in vivo. To facilitate clinical studies with [¹⁸F]FLT, we investigated two new easily accessible precursors, 2,3-anhydrothymidine (AThy) and 5-O-(4,4-dimethoxytriphenylmethyl)-2,3-anhydrothymidine (DMTThy), using a common approach for introducing the label with nucleophilic [¹⁸F]fluoride. Radiochemical yields were determined in dependence on substrate concentration, reaction time and temperature. In the case of AThy (10 mg), best FLT yields were 5.3%±1.2 (130 °C, 30 min). Labeling of DMTThy (10 mg) gave 14.3%±3.3 at 160 °C within 10 minutes. Starting with an aqueous solution of 20 GBq [¹⁸F]fluoride the new method allows to produce 1.3 GBq [¹⁸F]FLT within 90 minutes ready for intravenous injection. The new labeling procedures allow [¹⁸F]FLT synthesis without lengthy preparation of the precursor and with high reproducibility mandatory for clinical application.     

Luminescent heteronuclear Au(I)5Ag(I)8 complexes of [1,2,3-C6(C6H4R-4)3]3- (R = H, CH3, But) by cyclotrimerization of arylacetylides

Unusual AuI-AgI heterometallic complexes [Au5Ag8(mu-dppm)4{1,2,3-C6(C6H4R-4)3}(CCC6H4R-4)7]3+ (R = H 1, CH3 2, But 3) were isolated by reactions of polymeric silver arylacetylides (AgCCC6H4R-4)n with binuclear gold component [Au2(mu-dppm)2(MeCN)2]2+ (dppm = bis(diphenylphosphino)methane), in which cyclotrimerization of arylacetylide -CCC6H4R-4 affords trianion {1,2,3-C6(C6H4R-4)3}3- with an unprecedented mu5-bonding mode. Compounds 1(SbF6)3-3(SbF6)3 exhibit intense photoluminescence derived from an MLCT (Au5Ag8 --> CCC6H4R-4) transition, mixed with a metal cluster-centered excited states.     

New layered materials: syntheses, structures, and optical and magnetic properties of CsGdZnSe3, CsZrCuSe3, CsUCuSe3, and BaGdCuSe3

Four new quaternary selenides CsGdZnSe3, CsZrCuSe3, CsUCuSe3, and BaGdCuSe3 have been synthesized with the use of traditional high-temperature solid-state experimental methods. These compounds are isostructural with KZrCuS3, crystallizing with four formula units in the orthorhombic space group Cmcm. Cell constants (A) at 153 K are CsGdZnSe3 4.1684(7), 15.765(3), 11.0089(18); CsZrCuSe3 3.903(2), 15.841(10), 10.215(6); CsUCuSe3 4.1443(7), 15.786(3), 10.7188(18); and BaGdCuSe3 4.1839(6), 13.8935(19), 10.6692(15). The structure of these ALnMSe3 compounds (A = Cs, Ba; Ln = Zr, Gd, U; M = Cu, Zn) is composed of 2 to infinity [LnMSe3(n-)] (n = 1, 2) layers separated by A atoms. The Ln atom is octahedrally coordinated to six Se atoms, the M atom is tetrahedrally coordinated to four Se atoms, and the A atom is coordinated to a bicapped trigonal prism of eight Se atoms. Because there are no Se-Se bonds in the structure, the oxidation state of A is 1+ (Cs) or 2+ (Ba), that of Ln is 3+ (Gd) or 4+ (Zr, U), and that of M is 1+ (Cu) or 2+ (Zn). CsGdZnSe3 and BaGdCuSe3, which are paramagnetic, obey the Curie-Weiss law and have effective magnetic moments of 7.87(6) and 7.85(5) muB for Gd(3+), in good agreement with the theoretical value of 7.94 muB. Optical transitions at 1.88 and 2.92 eV for CsGdZnSe3 and 1.96 eV for BaGdCuSe3 were deduced from diffuse reflectance spectra.     

Spectrophotometric determination of trimethoprim by oxidation in drug formulations

A spectrophotometric determination of trimethoprim is described based on the reaction of its amine group with persulfate which acts as a strong oxidizing agent in alkaline media. The reaction produces a stable yellow colored compound after heating in a boiling water bath for 30 min. At λ_max 355 nm, Beer’s law is obeyed in the concentration range 10–60 μg ml^–1 with a molar absorptivity of 2.7 × 10³ l mol^–1cm^–1. The method is applied to formulations with sulfamethoxazole. Received: 30 July 1996 / Revised: 16 October 1996 / Accepted: 22 October 1996