Emploi des thiocarbohydrazones en analyse organique fonctionelle

Résumé Le thiocarbohydrazide est un réactif d'accès facile précipitant quantitativement les aldéhydes et quelques cétones. Les points de fusion sont nets. Les précipités formés se prêtent à la gravimétrie. Nous avons étudié avec la thermobalance leur domaine de stabilité et fourni la température à ne pas dépasser pour le séchage à poids constant.

---

Summary Thiocarbohydrazide is a readily available reagent which quantitatively precipitates aldehydes and some ketones. The melting points are sharp. The resulting precipitates are suitable for gravimetry. Their regions of stability have been investigated with the thermobalance and the temperatures which should not be exceeded in drying to a constant weight have been found.

---

Zusammenfassung Thiocarbohydrazid ist ein leicht zugängliches Reagens zur quantitativen Fällung der Aldehyde und mancher Ketone. Die Schmelzpunkte der Niederschläge sind scharf. Diese eignen sich zur gravimetrischen Auswertung. Ihre Stabilität wurde mit Hilfe der Thermowaage untersucht und die Höchsttemperaturen für ihre Trocknung bis zur Gewichtskonstanz bestimmt.

     

Possible Evidence of Amide Bond Formation Between Sinapinic Acid and Lysine-Containing Bacterial Proteins by Matrix-Assisted Laser Desorption/Ionization (MALDI) at 355?nm

We previously reported the apparent formation of matrix adducts of 3,5-dimethoxy-4-hydroxy-cinnamic acid (sinapinic acid or SA) via covalent attachment to disulfide bond-containing proteins (HdeA, Hde, and YbgS) from bacterial cell lysates ionized by matrix-assisted laser desorption/ionization (MALDI) time-of-flight-time-of-flight tandem mass spectrometry (TOF-TOF-MS/MS) and post-source decay (PSD). We also reported the absence of adduct formation when using ??-cyano-4-hydroxycinnamic acid (CHCA) matrix. Further mass spectrometric analysis of disulfide-intact and disulfide-reduced over-expressed HdeA and HdeB proteins from lysates of gene-inserted E. coli plasmids suggests covalent attachment of SA occurs not at cysteine residues but at lysine residues. In this revised hypothesis, the attachment of SA is preceded by formation of a solid phase ammonium carboxylate salt between SA and accessible lysine residues of the protein during sample preparation under acidic conditions. Laser irradiation at 355?nm of the dried sample spot results in equilibrium retrogradation followed by nucleophilic attack by the amine group of lysine at the carbonyl group of SA and subsequent amide bond formation and loss of water. The absence of CHCA adducts suggests that the electron-withdrawing effect of the ??-cyano group of this matrix may inhibit salt formation and/or amide bond formation. This revised hypothesis is supported by dissociative loss of SA (?224?Da) and the amide-bound SA (?206?Da) from SA-adducted HdeA and HdeB ions by MS/MS (PSD). It is proposed that cleavage of the amide-bound SA from the lysine side-chain occurs via rearrangement involving a pentacyclic transition state followed by hydrogen abstraction/migration and loss of 3-(4-hydroxy-3,5-dimethoxyphenyl)prop-2-ynal (?206?Da).     

Nanoscale Broadband Viscoelastic Spectroscopy of Soft Materials Using Iterative Control

A novel approach to nanoscale broadband viscoelastic spectroscopy is presented. The proposed approach utilizes the recently developed modeling-free inversion-based iterative control (MIIC) technique to achieve accurate measurement of the material response to the applied excitation force over a broad frequency band. Scanning probe microscope (SPM) and nanoindenter have become enabling tools to quantitatively measure the mechanical properties of a wide variety of materials at nanoscale. Current nanomechanical measurement, however, is limited by the slow measurement speed: the nanomechanical measurement is slow and narrow-banded and thus not capable of measuring rate-dependent phenomena of materials. As a result, large measurement (temporal) errors are generated when material is undergoing dynamic evolution during the measurement. The low-speed operation of SPM is due to the inability of current approaches to (1) rapidly excite the broadband nanomechanical behavior of materials, and (2) compensate for the convolution of the hardware adverse effects with the material response during high-speed measurements. These adverse effects include the hysteresis of the piezo actuator (used to position the probe relative to the sample); the vibrational dynamics of the piezo actuator and the cantilever along with the related mechanical mounting; and the dynamics uncertainties caused by the probe variation and the operation condition. In the proposed approach, an input force signal with frequency characteristics of band-limited white-noise is utilized to rapidly excite the nanomechanical response of materials over a broad frequency range. The MIIC technique is used to compensate for the hardware adverse effects, thereby allowing the precise application of such an excitation force and measurement of the material response (to the applied force). The proposed approach is illustrated by implementing it to measure the frequency-dependent plane-strain modulus of poly(dimethylsiloxane) (PDMS) over a broad frequency range extending over 3 orders of magnitude (~1 Hz to 4.5 kHz).     

Pattern discrimination and firing behavior of cold receptor model aided with noise

A method for characterizing and identifying firing patterns of neural spike trains is presented. Three characteristic variables defined at sequential moments, including two formal derivatives and the integration of the counting process, are introduced to reflect the temporal patterns of a spike train. This paper also examines how noise interacts with encoding mechanisms of neuronal stimulus in a cold receptor. From ISI series and bifurcation diagrams it is shown that there are considerable differences in interval distributions and impulse patterns caused by purely deterministic simulations and noisy simulations. The ISI-distance can be used as an effective and powerful way to measure the noise effects on spike trains quantitatively. It is found that spike trains observed in cold receptors can be more strongly affected by noise for low temperatures than for high temperatures in some aspects; meanwhile, spike train has greater variability with the noise intensity increasing.     

Homogenization of layered elastoplastic composites: Theoretical results

Exact closed-form solutions are derived that completely characterize the effective behavior of a composite material made of elastic-perfectly plastic parallel plane layers perfectly bonded together. The derivation is framed within a rigorous theory of homogenization for elastoplastic composites, and based on the fundamental fact that the in-plane part of the strain tensor and the out-of-plane part of the stress tensor are uniform throughout the composite provided no free-edge effects occur. The obtained expressions are coordinate-free and valid in the general anisotropic case. As an example, a layered composite material with isotropic constituents is examined in detail.     

Interlaced solitons and vortices in coupled DNLS lattices

In the present work, we propose a new set of coherent structures that arise in nonlinear dynamical lattices with more than one component, namely interlaced solitons. In the anti-continuum limit of uncoupled sites, these are waveforms whose one component has support where the other component does not. We illustrate systematically how one can combine dynamically stable unary patterns to create stable ones for the binary case of two-components. For the one-dimensional setting, we provide a detailed theoretical analysis of the existence and stability of these waveforms, while in higher dimensions, where such analytical computations are far more involved, we resort to corresponding numerical computations. Lastly, we perform direct numerical simulations to showcase how these structures break up, when they are exponentially or oscillatorily unstable, to structures with a smaller number of participating sites.