A definitive method for the determination of trace amounts of cobalt in biological materials by neutron activation analysis

A new, very accurate (definitive) method for the determination of trace amounts of cobalt in biological materials has been devised. The method is based on combination of neutron irradiation with quantitative and selective post-irradiation separation of cobalt from all accompanying radionuclides followed by measurement by -ray spectrometry. Column chromatography in which owing to addition of Co carrier the course of separation can be followed visually is the key element of the separation scheme. Several criteria have been formulated which must be simultaneously fulfilled in order to acknowledge the result as obtained by a definitive method. The high accuracy of the method has been demonstrated by the analysis of several certified reference materials of widely different Co contents.     

Atomic absorption spectrophotometric determination of gold with preconcentration by Donnan dialysis

Donnan dialysis enrichment with tubular cation-exchange membrane was used as a preconcentration method prior to determination of gold by flame atomic absorption spectrometry (FAAS). The value of enrichment factor can be controlled for a particular application through adjustment of the membrane tuning length, dialysis time, carrier flow rate, composition of the receiver solution and by addition of complexing ligand to the receiver or the sample solution. For 10 min dialysis enrichment factor above 3 can be achieved. The detection limit (signal-to-noise ratio = 3) of 35 ng/ml was obtained. RSD at 0.2 mug/ml level was 4.7% (n = 6). The results of dialysis of noble metals mixtures are demonstrated.     

The influence of the local surrounding on the hyperfine interactions in Zr(Fe1−x Ni x )2 compounds

Mössbauer spectroscopy and the TDPAC method have been used to study Zr(Fe_1–x Ni _x )₂ compounds forx0.30. The hyperfine magnetic field at the Fe sites and the quadrupole splitting as functions of nickel concentration were analysed by use of⁵⁷Fe Mössbauer spectroscopy. Values of the internal magnetic field on¹⁸¹Ta nuclei have been found by means of the TDPAC method.     

The determination of environmental and industrial exposure to heavy metals based on the quantitative isolation of metallothionein from human fluids, with application of covalent affinity chromatography with thiol-disulphide interchange gel as a solid-phase extraction support

The aim of this study was to present a new analytical method for the quantitative determination of metallothionein (MT) proteins in human body fluids and tissues, in order to determine the level of environmental and industrial exposure to heavy metals. For MT isolation, covalent affinity chromatography with thiol-disulphide inter-change (CAC-TDI) was applied. Fundamentals of indirect determination of the contents of metallothionein proteins were worked out through estimation of the quantities of metals bound with metallothionein protein and adsorbed on covalent affinity chromatography gel as on solid-phase extraction support during separating process. The (CAC-TDI) gel, specially prepared, was used as a solid phase extraction support (SPE) for preconcentration of Hg-thionein (Hg-Th), Cd-thionein (Cd-Th), Zn-thionein (Zn-Th) and Cu-thionein (Cu-Th) proteins and Hg, Cd, Zn and Cu bonded with MTs from water, human fluids such as: urine, human plasma, breast milk and tissues homogenates.     

On two methods of determining the ellipses and ellipsoids of positioning accuracy of robot manipulators

Summary When analysing the problem of the positioning accuracy of robot manipulators it is important to know how far random deviations of the hand may be from the desired position if the joint positioning errors possess a normal distribution. Two methods of determining the ellipses and ellipsoids of probability concentration are compared. The first of them is based on the standard procedure of the probability calculus. The second approximate method consists in finding at first the polygon or polyhedron of the positioning accuracy, and then in finding the ellipse or ellipsoid with principal axes and second order moments coinciding with those of the polygon or polyhedron, respectively. Examples of application demonstrate that these two methods give very close results.

---

Zwei Methoden zur Bestimmung der Ellipsen und Ellipsoide der Positioniergenauigkeit von Handhabungsrobotern

Übersicht Bei der Untersuchung der Positioniergenauigkeit von Handhabungsrobotern ist es wichtig, die Größe zufälliger Abweichungen des Greifers von der erstrebten Position zu kennen, wenn die Lagefehler der Verbindungen eine Normalverteilung besitzen. Es werden zwei Methoden zur Bestimmung der Ellipsen bzw. Ellipsoide der Wahrscheinlichkeitsdichte verglichen. Die erste beruht auf dem Standardverfahren der Wahrscheinlichkeitsrechnung. Die zweite Näherungsmethode besteht darin, daß zunächst das Polygon bzw. Polyeder der Positioniergenauigkeit bestimmt wird und danach die Ellipse bzw. das Ellipsoid mit den Hauptachsen und Momenten zweiter Ordnung wie das Polygon oder Polyeder. Beispiele zeigen, daß beide Methoden zu sehr ähnlichen Ergebnissen führen.

     

Electronic structure of octacyanides of molybdenum IV and V according to the SCCC MO method

The SCCC MO method has been used to calculate the electronic structure and spectrum of Mo(CN) ₈ ^4– and Mo(CN) ₈ ^3– ions of a D _4d symmetry. All metal-ligand and ligand-ligand interactions and all overlap integrals (over products of HF atomic orbitals) have been included within the SCCC MO scheme. Basing on these calculations a new assignment of some absorption bands is proposed. The overall agreement between the calculated and observed electronic spectrum is satisfactory.

---

Zusammenfassung Elektronenstruktur und Spektrum der [Mo(CN)₈]^–4- und [Mo(CN)₈]^–3-Ionen in D _4d -Symmetrie wurden mit der SCCC-MO-Methode berechnet. Alle Metall-Ligand- und Ligand-Ligand-Wechsel-wirkungen und Überlappungsintegrale wurden berücksichtigt. Die Bandenzuordnung wurde neu vorgenommen. Die Übereinstimmung der berechneten und gemessenen Spektren ist befriedigend.

---

Résumé Application à Mo(CN) ₈ ^4– et Mo(CN) ₈ ^3– de la méthode SCCC MO basée sur des orbitales atomiques HF approchées, en tenant compte du recouvrement et de toutes les interactions ligand-ligand. Dans la partie I on discute le cas de la symétrie D _4d . L'accord global avec l'expérience est satisfaisant en ce qui concerne les spectres. On montre aussi que toutes les attributions antérieures basées sur la théorie du champ cristallin semblent inadéquates.

---

---

The authors are grateful to Prof. W. Jakób, Dr. Z. Stasicka and Dr. A. Samotus for many interesting discussions, to Prof. J. Chojnacki for providing us with new X-ray results before publication and to Dr. A. J. Sadlej for a help in dealing with the computer.     

Flotation—spectrophotometric determination of osmium with thiocyanate and methylene blue

A sensitive flotation—spectrophotometric method, based on the ion associate formed by the anionic thiocyanate complex of osmium with the basic dye methylene blue (MB) is described. The ion associate precipitates when the aqueous solution is shaken with toluene, and the separated and washed compound is dissolved in acetone. The molar absorptivity is 2.2 × 10⁵ l mol^-1 cm^-1 at 655 nm. Beer's law is obeyed. The molar ratio of Os:SCN:MB in the separated and washed ion associate is 1:6:3. Ruthenium reacts similarly. The method is applied to the determination of traces of osmium in crucible platinum after separation of osmium by distillation as tetroxide.     

Thermal decomposition of Cr(III) dithiocarbamates

The thermal stability of chromium(III) complexes with dithiocarbamate acid derivatives was studied. The general formula of these complexes is (RCS₂)₃Cr where: The thermal stability of these complexes was found to depend on the kind ofR and the decomposition occur in several stages.The final product of the decomposition of the complexes in the 20–600 temperature range investigated is chromium sulphide, Cr₂S₃ or with incomplete combusted sulfur atoms.

---

Zusammenfassung Die Thermostabilität von Chrom(III)-Komplexen mit sauren Derivaten von Dithiocarbamat wurde untersucht. Die allgemeine Formel dieser Komplexe ist (RCS₂)₃Cr. Es wurde festgestellt, da\ die Thermostabilität dieser Komplexe von der Art von R abhängt und die Zersetzung in mehreren Stufen verläuft.Das Endprodukt der Zersetzung der Komplexe im untersuchten Temperaturbereich von 20 bis 600 ist Chromsulfid, Cr₂S₃, oder solches mit überschüssigem Schwefel.

---

Résumé On a étudié la stabilité thermique des complexes du chrome(III) avec les dérivés de l'acide dithiocarbamique. La formule générale de ces complexes est (RCS₂)₃Cr où: On a trouvé que la stabilité thermique de ces complexes dépendait de la nature du radical et que la décomposition se déroulait en plusieurs étapes.Dans l'intervalle de température étudié, de 20 à 600, le produit final de la décomposition des complexes est le sulfure de chrome, Cr₂S₃, éventuellement accompagné de soufre résultant d'une combustion incomplÊte.

---

(III) - . — (RCS₂)₃ Cr, , R . 20–600 Cr₂S₃ .

---

---

The autors would like to thank Doc. dr h. J. F. Biernat for valuable discussions.     

Sensitive spectrophotometric determination of tin with Pyrogallol Red and cetyldimethylbenzylammonium ions

Summary Tin(IV), in the presence of cetyldimethylbenzylammonium chloride (CDBA), forms with Pyrogallol Red (PR) a complex SnPR-CDBA. This complex floates at the interface between hexane and aqueous medium. It dissolves in acetone and can be advantageously used for the determination of tin. The molar absorptivity is 6.5×10⁴ l·mole^–1·cm^–1 at 480 nm. The method is selective when citric acid is used as masking agent. Phosphate, fluoride, EDTA, nitrite and sulphide interfere.

---

Zusammenfassung Zinn(IV) bildet mit Pyrogallolrot (PR) in Gegenwart von Cetyldimethylbenzylammoniumchlorid (CDBA) einen Komplex. Dieser wird flotiert, in Aceton gelöst und zur Bestimmung von Zinn verwendet. Der molare Absorptionskoeffizient bei =480 nm beträgt =6,5·10⁴ l·mol^–1 cm^–1. Die Methode ist selektiv, wenn Zitrate zur Maskierung verwendet werden. Es stören Phosphat, Fluorid, ÄDTA, Nitrit und Sulfid.