Interaction of dextran sulfates with positively and negatively charged silver bromide hydrosols

Summary The effects of dextran sulfates of different molecular weights and charge densities on the stability of positively and negatively charged silver bromide solsin statu nascendi have been studied by means of light scattering.The plots of scattering intensities of a positively charged sol against the concentration of the added dextran sulfates show one pronounced maximum, the position which is independent on the molecular weight of the polyelectrolyte used. The maximum shifts to lower polyion concentrations with dilution of the sol.The effect of polyanions on the stability of silver bromide sols of the same sign of charge were investigated as a function of molecular weight of the polymers, the sol concentration, the charge and the concentration of counterions, and the addition of methanol. Destabilization only occurred if sufficient amount of indifferent electrolyte was present in the system. However, the concentration of counterions necessary to produce a flocculation maximum was lower in the presence of the polyelectrolytes than in their absence. The results obtained were compared with the data on sols containing nonionic dextrans reported earlier.

---

Zusammenfassung Der Einfluß der Dextransulfate von verschiedenen Molekulargewichten und Ladungsdichten auf die Stabilität der positiv und negativ geladenen Silberbromid-Solein statu nascendi wurden durch Lichtstreuung untersucht. Wenn die Intensitäten der Lichtstreuung eines positiv geladenen Silberbromid-Sols gegen die Konzentration der zugesetzten DextranSulfate aufgetragen werden, tritt ein ausgeprägtes Maximum auf, dessen Lage von dem Molekulargewicht des angewandten Polyelektrolyten unabhängig ist. Bei Verdünnung des Sols wird das Maximum zur niedrigeren Konzentration des Polyanions verschoben.Der Einfluß der Polyanionen auf die Stabilität der Silberbromid-Sole mit gleichem Ladungsvorzeichen wurde in Abhängigkeit von dem Molekulargewicht des zugesetzten Dextransulfats, der Solkonzentration, der Ladung und Konzentration der Gegenionen und dem Zusatz von Methylalkohol untersucht. Destabilisierung wird nur in Anwesenheit einer genügenden Menge von Neutralelektrolyten in den untersuchten Systemen beobachtet. Die Konzentration der Gegenionen, die ein Flockungsmaximum verursachen, ist immer niedriger als die kritische Koagulationsmenge derselben Ionen für das gleiche Sol in Abwesenheit von Makroionen. Die Resultate wurden mit den Wechselwirkungen der Silberbromid-Sole mit nichtionogenen Dextranen verglichen, und der Mechanismus der Flockung durch Polyelektrolyte wurde diskutiert.

---

---

5 figures and 1 table

---

Supported by the NSF Grant GP 42331 X.

---

A part of the Ph.D. Thesis by David Lindsay.     

Darstellung und Eigenschaften von Chromtricarbonyl-Komplexen strukturisomerer Borazin-Derivate

The new hexaalkylborazine chromium tricarbonyls (n-Pr)₃B₃N₃Me₃Cr(CO)₃ (V), Me₃B₃N₃(n-Pr)₃Cr(CO)₃ (VI), (i-Pr)₃B₃N₃Me₃Cr(CO)₃ (VII) and Me₃B₃N₃(i-Pr)₃Cr(CO)₃ (VIII) have been prepared from fac-Cr(CO)₃(MeCN)₃ and the corresponding borazine in dioxane or without solvent. They are much more labile than the isomeric complex Et₃B₃N₃Et₃Cr(CO)₃ (IV) which can be readily obtained from Et₃B₃N₃Me₃Cr(CO)₃ and Et₃B₃N₃Et₃ by ring ligand exchange. The NMR., IR., UV. and Mass spectroscopic data of the complexes IV–VIII will be briefly discussed. The preparation of the borazine derivatives (n-Pr)₃B₃N₃Me₃ (IX) and Me₃B₃N₃(n-Pr)₃ (X) is also reported.     

Asymmetric synthesis by chiral ruthenium complexes : VI. Enantiomer-discrimination in the hydrogen transfer from racemic alcohols to prochiral ketones in the presence of H4Ru4(CO)8[(−)-diop]2

Hydrogen transfer from racemic alcohols to prochiral ketones in the presence of H₄Ru₄(CO)₈[(?)-DIOP]₂ has been examined. The enantiomer-discrimination is influenced by the structure of the reactants, temperature and the excess of phosphine present.     

Total synthesis of (±)-cyclooroidin

The first total synthesis of (±)-cyclooroidin, a member of the pyrrole-imidazole alkaloid family recently isolated from the sponge Agelas oroides in optically pure form, is described. The synthesis was achieved in nine linear steps, with an overall yield of 10%. Key step was a Wolff bromoketone synthesis performed on the intermediate longamide B.     

Synthetic,spectroscopic, and structural Studies on Lanthanide Complexes of Diphosphazane Dioxide Ligands

Lanthanide nitrate complexes of diphosphazane dioxides Ph₂P(O)N(Prⁱ)P(O)Ph₂ ( 1 ) and (PhO)₂P(O)N(Me)P(O)(OPh)₂ ( 2 ) have been synthesised and studied by conductometry, IR, multinuclear NMR spectroscopic methods and X-ray diffraction. Ligand 2 is accessible by two different methods, viz., by direct oxidation of the phosp(III)azane ligand or by starting from phosph(V)azane chloro precursor. The structure of 2 is confirmed by X-ray diffraction. Crystallographic data for 2 : Triclinic, Space group P1 , a = 10.078(1), b = 10.575(3), c = 12.364(4) Å, α = 75.70(2)°, α = 75.56(1)°, γ = 77.68(1)°, Z = 2, V = 1 220 ų; structure refined to R_F = 0.0459 on 3 495 data with F > 3σ(F). The diphosphazane dioxide ligand exhibits trans geometry in the solid state. The structure of a lanthanide complex, [Pr(NO₃)₃( 2 )₂] ( 14 ) is also determined by X-ray diffraction. Crystallographic data for 14 : Trigonal, Space group P3₂, a = b = 15.710(2), c = 40.067(2) Å, Z = 6, V = 8 564 ų; structure refined to R_F = 0.0430 on 8 077 data with F > 5σ(F). The two diphosphazane dioxide ligands and the nitrate groups are coordinated to praseodymium in a bidentate chelate fashion. The geometry around the ten coordinated metal is distorted bicapped square antiprism.     

Thermal decomposition mechanisms of sequential bipolyesters based on propeneglycol and hydroxybenzoic/phthalic diacid derivatives

Some bipolyesters consisting of 1,2-propene glycol residue (P) and symmetric aromatic diacid residue constituted by two p-oxybenzoyl groups coupled by a terephthaloyl (HTH), phthaloyl (HOH) and isophthaloyl (HIH) group, and a nonsymmetric diacid residue constituted by a p-oxybenzoyl and a terephthaloyl group (HT), have been investigated by direct pyrolysis–mass spectrometry. The results show that intramolecular exchange reactions occurring at the pyrolysis stage cause a reorganization of the copolymer sequences. Sequential bipolyesters I–IV are ideal materials for the investigation of the extent of thermal reorganization induced in the bipolymer sequences by the pyrolytic process.     

Electron-transfer reaction of cinnamic acids and their methyl esters with the DPPH(*) radical in alcoholic solutions

The kinetic behavior of cinnamic acids, their methyl esters, and two catechols 1-10 (ArOH) in the reaction with DPPH(*) in methanol and ethanol is not compatible with a reaction mechanism that involves hydrogen atom abstraction from the hydroxyl group of 1-10 by DPPH(*). The rate of this reaction at 25 degrees C is, in fact, comparatively fast despite that the phenolic OH group of ArOH is hydrogen bonded to solvent molecules. The observed rate constants (k(1)) relative to DPPH(*) + ArOH are 3-5 times larger for the methyl esters than for the corresponding free acids and, for the latter, decrease as their concentration is increased according to the relation k(1) = B/[ArOH](0)(m), where k(1) is given in units of M(-1) s(-1), m is ca. 0.5, and B ranges from 0.02 (p-coumaric acid) to ca. 3.48 (caffeic acid) in methanol and from 0.04 (p-coumaric acid) to ca. 13 (sinapic acid) in ethanol. Apparently, the reaction mechanism of DPPH(*) + ArOH involves a fast electron-transfer process from the phenoxide anion of 1-10 to DPPH(*). Kinetic analysis of the reaction sequence for the free acids leads to an expression for the observed rate constant, k(1), proportional to [ArOH](0)(-1/2) in excellent agreement with the experimental behavior of these phenols. The experimental results are also interpreted in terms of the influence that adventitious acids or bases present in the solvent may have. These impurities dramatically influence the ionization equilibrium of phenols and cause a reduction or an enhancement, respectively, of the measured rate constants.     

Peptide backbone folding induced by the C(alpha)-tetrasubstituted cyclic alpha-amino acids 4-amino-1,2-dithiolane-4-carboxylic acid (Adt) and 1-aminocyclopentane-1-carboxylic acid (Ac5c). A joint computational and experimental study

The conformational study of a new group of synthetic peptides containing 4-amino-1,2-dithiolane-4-carboxylic acid (Adt), a cysteine-related achiral residue, has been carried out through a joint application of computational and experimental methodologies. Molecular Dynamics simulations clearly suggest the tendency of this molecule to adopt a gamma-turn conformation in vacuum and help in analyzing the complex and crucial conformational behaviour of the dithiolane ring which appears to preferentially adopt a C(S)-like structure. Electronic structure calculations carried out in solution using the Density Functional Theory also indicate the preservation of the gamma-like folding in apolar solvents and the helix-like one in more polar solvents. A comparison with the achiral 1-aminocycloalkane-1-carboxylic acid (Ac5c) has been carried out using the same computational tools. NMR and IR data on dipeptide derivatives containing the Adt or Ac5c residue show that in chloroform solution all the models prefer a gamma-turn structure, centered at the cyclic residue, stabilized by an intramolecular H-bond, whereas in a more polar solvent, i.e. dimethyl sulfoxide, this folding is not maintained. The experimental conformational studies, extended to N-Boc protected tripeptides, clearly indicate the remarkable tendency of both the five-membered C(alpha)-tetrasubstituted cyclic amino acids Adt and Ac5c to induce the gamma-turn structure also in models able to adopt the beta-bend conformation.     

Association of bound states of the coulomb potential with resonances of the coulomb potential perturbed by a barrier

In the present article we show how the bound states of the Coulomb potential may be associated with resonances that occur when this potential is perturbed by a barrier potential. The main idea is to trace the bound states on successive switching on of the barrier perturbation. It is found that those bound states that are localized inside the barrier are highly sensitive to variation with respect to the barrier height, whereas those that are localized outside are less sensitive. However, there are certain intervals for the barrier height when the role of being “a state localized inside the barrier” is shifted from one bound state to another. The result can be pictured as a “relay race,” where the “deliveries of the baton” are carried out over corresponding avoided crossings. The baton is ultimately handed over to a shape-type resonance state.     

Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.