Cyclopropane chemistry. Part 5 [1,2]. Hexafluorocyclopropane as a source of difluorocarbene

Thermolysis of hexafluorocyclopropane in the presence of ethylene, propene, vinyl chloride, and vinyl bromide gives good yields of the corresponding 1,1-difluorocyclopropanes, formed by addition of difluorocarbene to the olefin. The tetrafluoroethylene formed dimerises to octafluorocyclobutane, co-dimerises with the olefin, or survives, depending on the reaction conditions. With allene, hexafluorocyclopropane gives 1-(difluoromethylene)cyclopropane, 2,2,3,3-tetrafluorospiropentane, and products derived from tetrafluoroethylene and allene.     

An integrated process for purification of lysozyme, ovalbumin, and ovomucoid from hen egg white

This article describes an integrated process for simultaneous purification of lysozyme, ovalbumin, and ovomucoid from hen egg white. The crude egg white extract was passed through a cation exchanger Streamline trade mark SP and the bound lysozyme was eluted with 5% ammonium carbonate, pH 9.0, containing 1 M NaCl after elution of avidin. This partially purified lysozyme was further purified 639-fold on dye-linked cellulose beads. Ovalbumin and ovomucoid did not bind to Streamline SP. Ovalbumin could be precipitated from this unbound fraction by 5% trichloroacetic acid, and ovomucoid was removed from the supernatant by precipitation with ethanol. The yields of lysozyme, ovomucoid, and ovalbumin were 77, 94, and 98%, respectively. All the purified proteins showed single bands on sodium dodecyl sulfate polyacrylamide gel electrophoresis. All the steps are easily scalable, and the process described here can be used for large-scale simultaneous purification of these proteins in the pure form.     

Synthesis, characterisation and evaluation of polydithiocarbamate resin supported on macroreticular styrene-divinylbenzene copolymer for the removal of trace and heavy metal ions

A new chelating resin was synthesised by the modification of styrene-divinylbenzene (2%) copolymer and incorporation of dithiocarbamate groups. The polydithiocarbamate resin was characterised by elemental analysis, thermal studies and IR studies. The analytical characteristics of the sorbent were established and optimum sorption conditions for Cu, Ni, Pb, Fe, As and Mn determined. The total sorption capacity of the resin was 37 mg g⁻¹ for Ni(II), 35 mg g⁻¹ for Cu(II), 29 mg g⁻¹ for Fe(III) and 23 mg g⁻¹ for Pb(II). The optimum pH for the removal of metal ions was 3-5 for Ni(II), 5 for Cu(II), 4 for Fe(III) and 4-5 for Pb(II). High sorption capacity was observed when compared with other conventional chelating polymers. The sorption kinetics was fairly rapid, as apparent from the loading half time t_1/2 values, indicating a better accessibility of the chelating sites.     

PERSONAL DOSIMETRY OF SOLAR UV RADIATION FOR DIFFERENT OUTDOOR ACTIVITIES

Abstract Quantifying individual exposure to ultraviolet radiation (UVR) is critical to understanding the etiology of a number of diseases including nonmelanotic and melanotic skin cancers. Measurements of personal exposure to solar UVR were made in Hobart, Tasmania in February (summer) 1991 for six different outdoor activities using UVR-sensitive polysulfone (PS) film attached at seven anatomical sites. Concurrent behavioral and environmental observations were also made. To date many studies have relied on subject recall to quantify past solar UVR exposures. To gain insight into the accuracy of subject recall the measured UVR exposures received by different subjects using the PS film were compared to those calculated from personal diaries and ambient solar UVB levels from a monitoring station. In general, when UVR exposure activities took place under close supervision, good correlations were obtained between the PS badges and the ambient measurements/diaries approach. Ultraviolet radiation exposures for the field study involving 94 subjects engaged in a number of outdoor activities are presented.     

Metal complexes of sulphur-nitrogen chelating agents. Part 14. Nickel(II), palladium(II), copper(II), cobalt(II), and cobalt(III) complexes of the tetradentate schiff bases having ONNS donor sites

Summary Complexes of nickel(II), palladium(II), copper(II), cobalt(II), and cobalt(III) with methyl-2-(-salicylaldiminoethyl)-cyclopent-1-en-dithiocarboxylate (H₂L¹) and methyl-2-(-salicylaldiminoisopropyl)cyclopent-1-en-dithiocarboxylate (H₂L²) have been prepared. They contain the donor sites ONNS. The metal(II) ions from neutral, monomeric square planar chelate complexes. The cobalt(III) complexes [CoL¹-(H₂O)₂]X (X=Cl or ClO₄) appear to betrans-diaqua-species. All compounds have been characterized by a number of physico-chemical methods.     

EFFECT OF CHLORIDE AND BENZOATE ANIONS ON THE DELAYED LIGHT EMISSION IN DCMU-TREATED SPINACH CHLOROPLASTS

Abstract —Chloride anions, when added to DCMU [3-(3,4-dichlorophenyl)-1,1-dimethylurea]-treated spinach chloroplasts, change the rate of decay of the delayed light emission in the seconds region but do not change the shape or the temperature dependence of the decay. Benzoate anions, on the other hand, change both the rate and the shape of the decay of the delayed light emission. These results are consistent with a model in which the membrane potential and the structure of the reaction center affect the decay kinetics of the delayed light emission in the seconds region.     

Dissociation constants of the ampholyte glycine in 50 mass % methanol-water from 5 to 55°C,with related thermodynamic quantities

The two thermodynamic dissociation constants of glycine at 11 temperatures from 5 to 55°C in 50 mass % methanol-water mixed solvent have been determined from precise emf measurements with hydrogen-silver bromide electrodes in cells without liquid junction. The first acidic dissociation constant (K ₁)for the process HG⁺H⁺+G^± is expressed as a function ofT(^oK) by the equation pK ₁ = 2043.5/T – 9.6504 + 0.019308T. At 25°C, pK ₁is 2.961 in the mixed solvent, as compared with 2.350 in water, with H°=1497 cal-mole^–1, G°=4038 cal-mole^–1, S°=–8.52 cal-°K^–1-mole^–1, and C _p ^o =–53 cal-°K^–1-mole^–1. The second acidic dissociation constant (K ₂)for the process G^±H⁺+G^– over the temperature range studied is given by the equation pK ₂ = 3627.1/T – 7.2371 + 0.015587T. At 25°C, pK ₂is 9.578 in MeOH–H₂O as compared with 9.780 in water, whereas H° is 10,257 cal-mole^–1, G° is 13,063 cal-mole^–1, S° is –9.41 cal-°K^–1-mole^–1, and C _p ^o is –43 cal-°K^–1-mole^–1. The protonated glycine becomes weaker in 50 mass % methanol-water, whereas the second dissociation process becomes stronger despite the lower dielectric constant of the mixed solvent (=56.3 at 25°C).     

Use of coupled-cluster based linear response theory and multireference hermitian MBPT to IP calculations of HF

We report in this paper the results of outer and inner valence IP calculations for the HF molecule using two different many-body methods for the direct evaluation of energy differences. The first is the nonperturbative coupled-cluster based linear response theory (LRT) and the second is the hermitian open-shell many-body perturbation theory (MBPT). A Huzinaga-Dunning (9s5p→ 5s3p/3s) basis has been used. LRT uses an “ionization operator” S as in the equation of motion method (EOM) to generate the ionized states from a coupled-cluster type of ground state. S is chosen to consist of single ionization and ionization-cum-shake-up operators, thus treating the Koopmans as well as the shake-up states on equal footing. LRT would thus be capable of computing both the outer and the inner valence regions with equal facility. This is borne out by the results. For the open-shell MBPT, the model space is chosen to be spanned by the singly ionized determinants. The convergence of the results for the inner valence region is slow, and the results obtained from the [2, 1] Pade' approximants are presented. Unlike the LRT, the inner valence region is not reproduced with full complexity in MBPT, indicating that it is essential to modify the theory by way of expanding the model space to contain the shake-up determinants also.     

Thermal decomposition of trans-chloro(2-allylphenyl)bis(triethylphospine)nickel(II)

Thermolysis of trans-chloro(2-allylphenyl)bis(triethylphosphine)nickel(II), I, in tetrachloroethylene has afforded indene as the major hydrocarbon product along with lesser amounts of allylbenzene and trans-β-methylstyrene. Organonickel products were trans-chloro(trichlorovinyl)bis(triethylphosphine)nickel(II), II, chloro[2-(trans-propenyl)phenyl]bis(triethylphosphine)nickel(II), III, and trans-dichlorobis(triethylphosphine)nickel(II). Compound III was the major product from thermolysis of I in benzene. Chloro[2-(cis-propenyl)phenyl]bis(triethylphosphine)nickel(II), IV, and III could be synthesized independently by treatment of chloro-2-(cis-propenyl)benzene and chloro-2-(trans-propenyl)benzene, respectively, with nickel acetylacetonate and triethylaluminium in the presence of triethylphosphine. Thermolysis of I in benzene containing allylbenzene led to the formation of trans-β-methylstyrene. The thermolysis of I in benzene in the presence of cis-1,4-hexadiene caused the skeletal rearrangement of the diene to trans-2-methyl-1,3-pentadiene. A catalyst derived from ethylenebis(triphenylphosphine)nickel(0) and hydrogen chloride isomerized allylbenzene to trans-β-methylstyrene.