Effect of time on the interfacial and foaming properties of beta-lactoglobulin/acacia gum electrostatic complexes and coacervates at pH 4.2

The electrostatic complexation between beta-lactoglobulin and acacia gum was investigated at pH 4.2 and 25 degrees C. The binding isotherm revealed a spontaneous exothermic reaction, leading to a DeltaHobs = -2108 kJ mol(-1) and a saturation protein to polysaccharide weight mixing ratio of 2:1. Soluble electrostatic complexes formed in these conditions were characterized by a hydrodynamic diameter of 119 +/- 0.6 nm and a polydispersity index of 0.097. The effect of time on the interfacial and foaming properties of these soluble complexes was investigated at a concentration of 0.1 wt % at two different times after mixing (4 min, referred as t approximately 0 h and t = 24 h). At t approximately 0 h, the mixture is mainly made of aggregating soluble electrostatic complexes, whereas after 24 h these complexes have already insolubilize to form liquid coacervates. The surface elasticity, viscosity and phase angle obtained at low frequency (0.01 Hz) using oscillating bubble tensiometry revealed higher fluidity and less rigidity in the film formed at t approximately 0 h. This observation was confirmed by diminishing bubble experiments coupled with microscopy of the thin film. It was thicker, more homogeneous and contained more water at t approximately 0 h as compared to t = 24 h (thinner film, less water). This led to very different gas permeability's of Kt approximately 0 h = 0.021 cm s(-1) and Kt=24 h) = 0.449 cm s(-1), respectively. Aqueous foams produced with the beta-lactoglobulin/acacia gum electrostatic complexes or coacervates exhibited very different stability. The former (t approximately 0 h) had a stable volume, combining low drainage rate and mainly air bubble disproportionation as the destabilization mechanism. By contrast, using coacervates aged for 24 h, the foam was significantly less stable, combining fast liquid drainage and air bubble destabilization though fast gas diffusion followed by film rupture and bubble coalescence. The strong effect of time on the air/water interfacial properties of the beta-lactoglobulin/acacia gum electrostatic complexes can be understood by their reorganization at the interface to form a coacervate phase that is more fluid/viscous at t approximately 0 h vs rigid/elastic at t = 24 h.     

Phase separation of p53 precedes aggregation and is affected by oncogenic mutations and ligands

Mutant p53 tends to form aggregates with amyloid properties, especially amyloid oligomers inside the nucleus, which are believed to cause oncogenic gain-of-function (GoF). The mechanism of the formation of the aggregates in the nucleus remains uncertain. The present study demonstrated that the DNA-binding domain of p53 (p53C) underwent phase separation (PS) on the pathway to aggregation under various conditions. p53C phase separated in the presence of the crowding agent polyethylene glycol (PEG). Similarly, mutant p53C (M237I and R249S) underwent PS; however, the process evolved to a solid-like phase transition faster than that in the case of wild-type p53C. The data obtained by microscopy of live cells indicated that transfection of mutant full-length p53 into the cells tended to result in PS and phase transition (PT) in the nuclear compartments, which are likely the cause of the GoF effects. Fluorescence recovery after photobleaching (FRAP) experiments revealed liquid characteristics of the condensates in the nucleus. Mutant p53 tended to undergo gel- and solid-like phase transitions in the nucleus and in nuclear bodies demonstrated by slow and incomplete recovery of fluorescence after photobleaching. Polyanions, such as heparin and RNA, were able to modulate PS and PT in vitro. Heparin apparently stabilized the condensates in a gel-like state, and RNA apparently induced a solid-like state of the protein even in the absence of PEG. Conditions that destabilize p53C into a molten globule conformation also produced liquid droplets in the absence of crowding. The disordered transactivation domain (TAD) modulated both phase separation and amyloid aggregation. In summary, our data provide mechanistic insight into the formation of p53 condensates and conditions that may result in the formation of aggregated structures, such as mutant amyloid oligomers, in cancer. The pathway of mutant p53 from liquid droplets to gel-like and solid-like (amyloid) species may be a suitable target for anticancer therapy.

Mutant p53 tends to form aggregates with amyloid properties, especially amyloid oligomers inside the nucleus, which are believed to cause oncogenic gain-of-function (GoF).     

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Electrostatic patterning of a silica surface: a new model for charge build-up on a dielectric solid

The polarization of interdigitated gold electrodes mounted over a silica thin film formed by oxidation of a Si wafer produces reproducible electrostatic patterns with overall excess negative charge, as observed by scanning electric potential microscopy. Domain charge concentrations as high as 76 charge units per square micrometer are obtained when a 5 V difference is applied to the electrodes thus producing fields in the 10(6) V m(-1) range. These patterns vanish when the electrodes are short-circuited and grounded. Characteristic times for pattern formation and relaxation are in the order of 10 min. The results are consistent with a model based on the discharge of H(+) ions at the negative electrodes, leaving behind immobile surface-bound SiO(-) groups and thus showing that chemisorption phenomena are decisive for electrostatic charging of insulators.     

A study of two-electron quantum dot spectrum using discrete variable representation method

A variational method called discrete variable representation is applied to study the energy spectra of two interacting electrons in a quantum dot with a three-dimensional anisotropic harmonic confinement potential. This method, applied originally to problems in molecular physics and theoretical chemistry, is here used to solve the eigenvalue equation to relative motion between the electrons. The two-electron quantum dot spectrum is determined then with a precision of at least six digits. Moreover, the electron correlation energies for various potential confinement parameters are investigated for singlet and triplet states. When possible, the present results are compared with the available theoretical values.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).