Breather trapping and breather transmission in a DNA model with an interface

We study the dynamics of moving discrete breathers in an interfaced piecewise DNA molecule. This is a DNA chain in which all the base pairs are identical and there exists an interface such that the base pairs dipole moments at each side are oriented in opposite directions. The Hamiltonian of the Peyrard-Bishop model is augmented with a term that includes the dipole-dipole coupling between base pairs. Numerical simulations show the existence of two dynamical regimes. If the translational kinetic energy of a moving breather launched towards the interface is below a critical value, it is trapped in a region around the interface collecting vibrational energy. For an energy larger than the critical value, the breather is transmitted and continues travelling along the double strand with lower velocity. Reflection phenomena never occur. The same study has been carried out when a single dipole is oriented in opposite direction to the other ones. When moving breathers collide with the single inverted dipole, the same effects appear. These results emphasize the importance of this simple type of local inhomogeneity as it creates a mechanism for the trapping of energy. Finally, the simulations show that, under favorable conditions, several launched moving breathers can be trapped successively at the interface region producing an accumulation of vibrational energy. Moreover, an additional colliding moving breather can produce a saturation of energy and a moving breather with all the accumulated energy is transmitted to the chain.     

Market Power Issues in Bid-Based Hydrothermal Dispatch

The objective of this work is to investigate market power issues in bid-based hydrothermal scheduling. Initially, market power was simulated with a single stage Cournot–Nash equilibrium model. In this static model the equilibrium was calculated analytically. It was shown that the total production of N strategic agents is smaller than the least-cost solution by a factor of (N/(N+1)). Market power analysis for multiple stages was then carried through a stochastic dynamic programming scheme, where the decision in each stage and state is the Cournot–Nash equilibrium of a multi-agent game. Case studies with data taken from the Brazilian system are presented.     

Meltable Spin Transition Molecular Materials with Tunable Tc and Hysteresis Loop Width

Herein, we report a way to achieve abrupt high‐spin to low‐spin transition with controllable transition temperature and hysteresis width, relying not on solid‐state cooperative interactions, but utilizing coherency between phase and spin transitions in neutral Fe^II meltable complexes.     

Direct chemical profiling of olive (Olea europaea) fruit epicuticular waxes by direct electrospray‐ultrahigh resolution mass spectrometry

In the present paper, an electrospray ionization (ESI)‐Orbitrap method is proposed for the direct chemical profiling of epicuticular wax (EW) from Olea europaea fruit. It constitutes a rapid and efficient tool suitable for a wide‐ranging screening of a large number of samples. In a few minutes, the method provides a comprehensive characterization of total EW extracts, based on the molecular formula of their components. Accurate mass measurements are obtained by ultrahigh resolution mass spectrometry, and compositional restrictions are set on the basis of the information available from previous studies of olive EW. By alternating positive and negative ESI modes within the same analysis, complementary results are obtained and a wide range of chemical species is covered. This provides a detailed compositional overview that otherwise would only be available by applying multiple analytical techniques. Copyright © 2015 John Wiley & Sons, Ltd.     

Quantitative colorimetric-imaging analysis of nickel in iron meteorites

A quantitative analytical imaging approach for determining the nickel content of metallic meteorites is proposed. The approach uses a digital image of a series of standard solutions of the nickel-dimethylglyoxime coloured chelate and a meteorite sample solution subjected to the same treatment as the nickel standards for quantitation. The image is processed with suitable software to assign a colour-dependent numerical value (analytical signal) to each standard. Such a value is directly proportional to the analyte concentration, which facilitates construction of a calibration graph where the value for the unknown sample can be interpolated to calculate the nickel content of the meteorite. The results thus obtained were validated by comparison with the official, ISO-endorsed spectrophotometric method for nickel.The proposed method is fairly simple and inexpensive; in fact, it uses a commercially available digital camera as measuring instrument and the images it provides are processed with highly user-friendly public domain software (specifically, ImageJ, developed by the National Institutes of Health and freely available for download on the Internet).In a scenario dominated by increasingly sophisticated and expensive equipment, the proposed method provides a cost-effective alternative based on simple, robust hardware that is affordable and can be readily accessed worldwide. This can be especially advantageous for countries were available resources for analytical equipment investments are scant. The proposed method is essentially an adaptation of classical chemical analysis to current, straightforward, robust, cost-effective instrumentation.     

A new dinuclear Ru-Hbpp based water oxidation catalyst with a trans-disposition of the Ru-OH

The bis(2-pyridyl)ethylamine (bpea) ligand has been used as a starting material for the synthesis of dinuclear Ru complexes of general formula trans,fac-{[Ru(n)X(bpea)](2)(μ-bpp)}(m+) (for X = Cl, n = II, m = 1, trans-Ru(II)-Cl, 1(+); for X = OH, n = III, m = 3, trans-Ru(III)-OH, 2(3+)) where the 3,5-bis(2-pyridyl)pyrazolate anionic ligand (bpp) acts as bridging dinucleating ligand, the bpea ligand coordinates in a facial manner and the monodentate ligands X are situated in a trans fashion with regard to one another. These complexes have been characterized in solution by 1D and 2D NMR spectroscopy, UV-vis and electrochemical techniques and in the solid state by X-ray diffraction analysis. The reaction of 1(PF(6)) with Ag(+) generates the corresponding solvated complex where the Cl ligand has been removed as insoluble AgCl, followed by the oxidation of Ru(II) to Ru(III) to generate the corresponding dinuclear complex trans-Ru(III)-OH, 2(PF(6))(3). The latter has been shown to catalytically oxidize water to molecular dioxygen using Ce(IV) as oxidant. Quantitative gas evolution as a function of time has been monitored on line by both manometry and mass spectroscopy (MS) techniques. Relative initial velocities of oxygen formation together with structural considerations rule out an intramolecular O-O bond formation pathway.     

The effect of heating temperature and nitric acid treatments on the performance of Cu- and Zn-based broad spectrum respirator carbons

Impregnated activated carbons (IACs) that are used in broad spectrum gas mask applications have historically contained copper and/or zinc impregnants. The addition of an oxidizing agent, such as nitric acid (HNO(3)) can be useful in distributing the metallic impregnants uniformly on the activated carbon substrate. In this work, we study IACs prepared from copper nitrate (Cu(NO(3))(2)) and zinc nitrate (Zn(NO(3))(2)) precursors as a function of HNO(3) content present in the impregnating solution and as a function of heating temperature. The gas adsorption capacity of the IACs was determined by dynamic flow testing using sulfur dioxide (SO(2)), ammonia (NH(3)), hydrogen cyanide (HCN) and cyclohexane (C(6)H(12)) challenge gases under dry and humid conditions. The thermal decomposition and distribution of the impregnant on the activated carbon substrate is studied using X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermal analysis techniques. Relationships between gas adsorption capacity, impregnant distribution and the species of surface impregnants are discussed.     

New ru(II) complexes containing oxazoline ligands as epoxidation catalysts. Influence of the substituents on the catalytic performance

The synthesis of a family of new Ru complexes containing the facial tridentate ligand with general formula [Ru(II)(T)(D)(X)](n+) (T = trispyrazolylmethane (tpm); D = ((4S,4'S)-(-)-4,4',5,5'-tetrahydro-4,4'-bis(1-methylethyl)-2,2'-bioxazole) (iPr-box-C) or N-(1-hydroxy-3-methylbutan-(2S)-(-)-2-yl)-(4S)-(-)-4-isopropyl-4,5-dihydrooxazole-2-carbimidate (iPr-box-O); X = Cl, H(2)O) has been described. All complexes have been spectroscopically characterized in solution through (1)H NMR and UV-vis techniques, and the redox properties of complexes have also been studied by means of cyclic voltammetry (CV). Furthermore, the chloro complexes presented here have been characterized in the solid state through monocrystal X-ray diffraction analysis. The oxazolinic iPr-box-C ligand undergoes a Ru-assisted hydrolysis reaction generating the corresponding amidate anionic ligand iPr-box-O, that keeps coordinated to the Ru metal center and that produces a strong σ-donation effect over it. The reactivity of the Ru-OH(2) complexes described in this paper together with other similar ones, previously synthesized by us, has been tested with regard to the epoxidation of different olefins. Complexes [Ru(II)(R-box-C)(tpm)OH(2)](BF(4))(2), R = Bz, 3'c/iPr, 3c, show high stereoselectivity in the epoxidation of cis-β-methylstyrene, with the exclusive formation of the cis-epoxide. However, there is a significant difference in regioselectivity between the two catalysts in the epoxidation of 4-vinylcyclohexene; complex 3'c leads to the regioselective oxidation at the ring alkene position, whereas complex 3c leads to the oxidation at the terminal position. Computational calculations indicate only small energy differences between the two possible products of 4-vinylcyclohexene epoxidation, but the energy barriers for the interaction of the catalytic systems with the alkene groups of 4-vinylcyclohexene agree with the reactivity differences found for the two catalysts having isopropyl or benzyl as substituent of the oxazole ligand. Computed local Fukui functions help to explain the observed reactivity trends.