Factors affecting the combustion toxicity of polymeric materials

Fire gas toxicity is an essential component of any fire hazard analysis. However, fire toxicity, like flammability, is both scenario and material dependent. A number of different methods exist to assess the fire toxicity, but many of them fail to relate this to a particular fire scenario. Sample thickness alone, in a closed box test such as the NBS Smoke Chamber, is shown to change the fire scenario from well-ventilated to under-ventilated. Data from two flow-through tests, the static tube furnace (NF X 70-100) and the steady state tube furnace (the Purser furnace, BS 7990 and ISO TS 19700) show that there are different patterns of behaviour for different polymers (LDPE, polystyrene, rigid PVC and Nylon 6.6). The predicted toxicities show variation of up to two orders of magnitude with change in fire scenario. They also show change of at least one order of magnitude for different materials in the same fire scenario. Finally, they show that in many cases CO, which is often assumed to be the most, or even the only toxicologically significant fire gas, is of less importance than either HCl, or HCN, when present, and in some cases less important than organo-irritants. Nylon 6.6 shows the highest predicted toxicity, the greatest scenario dependence, and the least sensitivity to different apparatuses, while polystyrene shows the highest sensitivity to the different apparatuses, but the lowest to different fire scenarios. PVC shows high toxicity, mostly due to HCl in the fire effluent, under all fire conditions, and LDPE shows a more progressive increase in toxicity from well-ventilated flaming to both smouldering and under-ventilated flaming.     

Fabrication of nanoscale metallic spirals using phospholipid microtubule organizational templates

We describe the fabrication of metallic Cu spiral/helical nanostructures prepared via selective electroless metallization of a phospholipid microtubule template. The metallization template is created through selective, sequential adsorption of the oppositely charged polyelectrolytes, sodium poly(styrenesulfonate) (PSS) and poly(ethyleneimine) (PEI), onto nanoscale seams naturally occurring on the microtubule surface. A negatively charged Pd(II) nanoparticle catalyst is bound to the terminal cationic PEI layer of the multilayer film and initiates selective template metallization to form the helical Cu nanostructures. Details of the process are presented, and a mechanism and factors affecting the control of the feature critical dimensions are discussed.     

Relative reactivities in vinyl copolymerization

From data in the literature on relative rates of copolymerization it has been possible to evaluate two constants, Q and e, characteristic of an individual monomer, which appear to account satisfactorily for its behavior in copolymerization. The constant Q describes the “general monomer reactivity” and is apparently related to possibilities for stabilization in a radical adduct. The constant e takes account of polar factors influencing copolymerization.     

The Role of Carnitine Acyltransferases in the Maintenance of Cell Function

Summary. Carnitine acyltransferases catalyse equilibria between acyl-CoA esters and the respective acylcarnitines. Therefore, they act not only as pathway enzymes, but also as modulators of acyl-CoA concentrations within individual sub-cellular compartments. Because acyl-CoA esters are potent biologically active metabolites, carnitine acyltransferase activities are potentially able to affect a diverse range of physiological processes, ranging from insulin secretion, to appetite control, and insulin sensitivity of tissues. The distinctive subcellular distributions of the different types of carnitine acyltransferases also enables them to participate in the transfer of acyl moieties across intracellular membranes, and of particular acylcarnitine esters across the plasma membrane and into the plasma. Pharmacological strategies that make use of these properties to improve cell function are discussed.     

Use of the magnetic suspension balance for the study of polymersolutions

The method involves the isothermal gravimetric determination of the absorption of an organic vapour into a thin film of liquid polymer spread upon an inert particulate support. Results are presented for the absorption of benzene and cyclohexane at 25°C in poly (dimethylsiloxane), and the concentration variation of the interaction parameter determined is compared with that found by other workers.The determination of the partial molar enthalpy of mixing was also examined by studying the absorption of hexane in poly (dimethylsiloxane) over the temperature range of 25 to 35°C, and comparing the value obtained with published values.     

Conformational studies of 1,2,3-trichloro- and 1,2,3-tribromopropane by nuclear magnetic resonance spectroscopy: attractive parallel (1:3) halogen-hydr

Analysis of the NMR spectra of 1,2,3-trichloropropane and 1,2,3-tribromopropane in various media shows the most stable conformer to be AG_-. The populations of several conformera have been estimated by using pure trans and gauche coupling constants obtained from closely similar molecules. The calculated populations found in non-polar solvents agree well with those obtained by electron diffraction studies in the gas phase. It is suggested that the AG_- form is stabilised relative to AG₊ by the former having two parallel (1:3) halogen-hydrogen attractions against one in the AG₊ form. Comparison is made to related molecules where the most stable conformers also have the greatest number of parallel (1:3) halogen-hydrogen interactions.     

Wide line and pulsed NMR studies of carboxyl-terminated polybutadiene polymers and binders

Nuclear magnetic resonance relaxation and line width studies were performed on two carboxyl-terminated polybutadiene polymers and their corresponding binders at temperatures from ?170 to 25°C. It was observed that the line widths of the binders increased as the functionality of the corresponding liquid polymers increased. In addition, glass transition temperatures and activation energies obtained from line width measurements were determined. From pulse measurements the magnitude of the relaxation time T₁ and the temperature at which T₁ is a minimum were determined for a polymer and its corresponding binder. These empirical quantities for the carboxyl-terminated polybutadiene polymers were lower than those of the corresponding binders because of less restraints in the internal motions of the polymer chain.     

Monomer, dimer, tetramer, polymer: structural diversity in zinc and cadmium complexes of chelate-tethered nucleobases

A series of ZnII and CdII complexes of adenine and guanine derivatives containing a diamine tether have been isolated from aqueous solutions and characterised by single crystal X-ray analysis. These studies reveal a wide range of structural types including monomeric, dimeric, tetrameric and polymeric architectures. The extended structures arise from the ability of the ligands to bridge metal ions using the chelating tether in conjunction with N7 of the nucleobase. Additional metal-nucleobase co-ordination is generally observed at the N3-site of the adenine derivatives. With CdII, ethylenediamine-N9-ethylguanine forms an inverted G-tetrad type structure.     

Validity of the rotational sudden approximation for vibrational relaxation in He + CO

Calculations of cross sections and rate constants are reported for the vibrational relaxation of CO in collision with ³He and ⁴He. Results computed using a semiclassical technique and a vibrational close-coupling, rotational infinite-order sudden method are compared.     

Polyamine-based anion receptors: Extraction and structural studies

In the discussion that follows some of the more recent progress in the area of anion binding by synthetic polyamine receptors is presented, with emphasis given to work undertaken by the authors’ groups. A continuing theme in these studies has been the relationship between receptor structure and its anion extraction properties.Systematic solvent extraction and structural studies for halide and perrhenate complexes with polyamines of tripodal, macrocyclic and macrobicyclic architecture that contain both aromatic moieties and four to eight amine functions have been performed in order to derive relevant structure-binding/extractability relationships. The results demonstrate that the binding and extraction behaviour of the polyamines towards halides and perrhenate is a complex function of their structural features, degree of protonation and lipophilic properties. The extraction is characterized by the preferred formation of mono- and diprotonated amine species in the organic phase. X-ray structure studies of iodide and perrhenate complexes with open-chain tetraamino derivatives and octaamino cryptands in different protonation states lead to the conclusion that in the first case only limited chelation of the anion occurs and in the second only highly protonated species are able to encapsulate the anion. The structural patterns observed are strongly influenced by the presence of water molecules in the crystals.