Infrared spectroscopy for the study of urinary calculi

The occurance of the urinary stones varies according to the geographical regions. The presence of stones in the urinary system causes pain and discomfort. These generate colics and hence are sometimes life threatening. In the present study, infrared measurements have been made on several stone samples. It has been found that calcium oxalate, calcium phosphate, magnesiunm ammonium phosphate, calcium carbonate, uric acid, -cystine and xanthin are present, as expected. Also, silicon dioxide is found to be present in some of the stones but in small quantity, in addition to the above constituents. This constituent is responsible to exhibit piezoelectricity in the urinary calculi.     

Excess volume of mixing of some electron-donating hydrocarbons with an electron-accepting liquid 1,2,4-trichlorobenzene

The excess volume of mixing of some electron-donating aromatic hydrocarbons like benzene, toluene,p-xylene, and mesitylene with an electronaccepting liquid 1,2,4-trichlorobenzene have been measured at 30°C. The results indicate that the interaction between the components increases as the electron-donating power of the hydrocarbons increases. The V _m ^e values are related to the ionization potentials of the hydrocarbons.     

NEW DYNAMIC INEQUALITIES FOR DECREASING FUNCTIONS AND THEOREMS OF HIGHER INTEGRABILITY

In this paper we establish some new dynamic inequalities on time scales which contain in particular generalizations of integral and discrete inequalities due to Hardy, Littlewood, P′olya, D'Apuzzo, Sbordone and Popoli. We also apply these inequalities to prove a higher integrability theorem for decreasing functions on time scales.     

Highly Selective and Sensitive Graphene Based Electrochemical Sensor for Quantification of Receptor Agonist Rizatriptan

A highly selective and sensitive electrochemical sensor has been developed by modification of a glassy carbon electrode (GCE) with graphene (GRP) for quantification of Rizatriptan. The significant increase of the peak current and the improvement of the oxidation peak potential indicate that the electrochemical sensor facilitates the electron transfer of Rizatriptan. The oxidation peak current was proportional to the Rizatriptan concentration in the range from 100 to 600 µg/mL with detection (LOD) and quantification limit (LOQ) of 36.52 and 121.73 µg/mL, respectively. The developed method was successfully employed for quantification of Rizatriptan in pharmaceutical formulations. The sensor shows great promise for simple, sensitive and quantitative detection of Rizatriptan.     

Existence results and the monotone iterative technique for systems of nonlinear fractional differential equations

By establishing a comparison result and using the monotone iterative technique combined with the method of upper and lower solutions, we investigate the existence of solutions for systems of nonlinear fractional differential equations.     

EFFECT OF FLAME SUPPORT LAYER GEOMETRY AND MATERIALS ON THE RADIANT EFFICIENCY OF GAS RADIANT BURNERS

Parallel rods / tubes flame support layers were used to study variations in geometry and materials on radiant burner performance. An increased density of rods increased the efficiency, as more surface area was provided to extract the heat of combustion. This effect was attenuated far fraction closed areas above 0·33 because of increased interference of direct base-to-load radiation. Thinner rods (with fraction closed area constant), having a lower thermal conduction resistance, fostered higher efficiency. Greater distances between the base and rods decreased efficiency due to air entrainment. This functioned to cool the base, increasing the range of combustion intensities where a portion of combustion lifted from the burner base. Isolation of radiating materials from conducting to the burner housing resulted in a ～ 5% upward shift in efficiency. Low to high efficiency was measured for alumina, mullite, and oxidized stainless steel rods, respectively; this was related directly to the emittances of the materials used. SiC and MoSi₂ coatings on alumina rods resulted in burners which were as efficient as one with stainless steel rods. A burner designed as a restricted band spectral emitter was not as efficient in its high-emission range as a more graybody emitter under the same combustion intensity; the higher-temperature spectral emitter discouraged extraction of sensible heat from the combustion product stream.     

Effective removal of 4-Aminophenol from aqueous environment by pea (Pisum sativum) shells activated with sulfuric acid: Characterization,isotherm, kinetics and thermodynamics

The threat of phenol contamination in aquatic ecosystems is significant for the health of the earth's water systems as well as all humans on it. The present study was conducted to synthesize a cost-effective adsorbent (pea shells activated with sulfuric acid, PSASA) from agriculture waste (pea shells) and its use for effective removal of toxic 4-Aminophenol (4-AP). Newly designed PSASA exhibited significant adsorption of 4-AP which was confirmed by SEM, FT-IR, and XRD analysis. Surface topography confirmed high unevenness of the PSASA surface and the macroporous feature of the PSASA was confirmed by BET analysis. . Multiple testing was done to see how various factors affected adsorption such as adsorbent dose, temperature, pH, PZC, the effect of KCl and urea addition and the effect of the initial concentration of 4-AP. A drop in adsorption uptake of 4-AP was observed as the temperature increases from 25 °C to 45 °C. Maximum adsorption uptake (q_m) was found to be 106.11 mg/g at an optimum pH of 7.0 and 25 °C. Among various adsorption isotherm models tested, Langmuir Isotherm gave the best explanation with high R² values of experimental data. The pseudo-first-order model was found to explain the kinetics of adsorption well. The thermodynamic finding confirms the adsorption process was physical and exothermic. The adsorption of 4-AP was primarily governed by electrostatic interaction, hydrogen-bonding and π-π exchange mechanism. Because of the positive outcomes of the present research, we can use the PSASA as a cost-effective adsorbent for removing phenolic compounds.     

High-rate and high-density gas separation adsorbents and manufacturing method

High-rate and high-density gas separation adsorbents used in vacuum pressure swing adsorption (VPSA) processes are described. Agglomerated zeolite Li–LSX compositions made using colloidal silica binding agents and having improved nitrogen pore diffusivity compared to like compositions prepared with traditional clay binders, are also described. Preparation methods for the colloidal silica-bound adsorbents are described together with their characterization by mercury (Hg) porosimetry, scanning electron microscopy (SEM) and low dead-volume breakthrough testing, from which the pore diffusivity is obtained. In this article, we show how the location and dispersion of the colloidal silica binding agent within the agglomerated zeolite particle yields pore-architectures that resemble “state-of-the-art” binderless adsorbents. In addition, we use VPSA process simulations to show that the best process performance is achieved by the combination of high-rate and high-density adsorbent properties.