Controlled interparticle spacing for surface-modified gold nanoparticle aggregates

Aggregation of gold nanoparticles of increasing size has been studied as a consequence of adsorption of 2-aminothiophenol (ATP) on gold nanoparticle surfaces. The capping property of ATP in the acidic pH range has been accounted from UV-vis absorption spectroscopy and surface-enhanced Raman scattering (SERS) studies. The effect of nanoparticle size (8-55 nm) on the nature of aggregation as well as the variation in the optical response due to variable degree of interparticle coupling effects among the gold particles have been critically examined. Various techniques such as transmission electron microscopy, X-ray diffraction, zeta-potential, and average particle size measurement were undertaken to characterize the nanoparticle aggregates. The aggregate size, interparticle distances, and absorption band wavelengths were found to be highly dependent on the pH of the medium and the concentration of the capping agent, ATP. The acquired SERS spectra of ATP relate the interparticle spacing. It has been observed that the SERS signal intensities are different for different sized gold nanoparticles.     

Temperature-dependent solvation dynamics of water in sodium bis(2-ethylhexyl)sulfosuccinate/isooctane reverse micelles

In this paper, for the first time, we report a detailed study of the temperature-dependent solvation dynamics of a probe fluorophore, coumarin-500, in AOT/isooctane reverse micelles (RMs) with varying degrees of hydration (w0) of 5, 10, and 20 at four different temperatures, 293, 313, 328, and 343 K. The average solvation time constant becomes faster with the increase in w0 values at a particular temperature. The solvation dynamics of a RM with a fixed w0 value also becomes faster with the increase in temperature. The observed temperature-induced faster solvation dynamics is associated with a transition of bound- to free-type water molecules, and the corresponding activation energy value for the w0 = 5 system has been found to be 3.4 kcal mol-1, whereas for the latter two systems, it is approximately 5 kcal mol-1. Dynamic light scattering measurements indicate an insignificant change in size with temperature for RMs with w0 = 5 and 10, whereas for a w0 = 20 system, the hydrodynamic diameter increases with temperature. Time-resolved fluorescence anisotropy studies reveal a decrease in the rotational restriction on the probe with increasing temperature for all systems. Wobbling-in-cone analysis of the anisotropy data also supports this finding.     

Spectroscopic studies on the effect of temperature on pH-induced folded states of human serum albumin

Human serum albumin (HSA) is a very important multi-domain transporter protein in the circulatory system responsible for carriage of various kinds of ligands within the physiological system. HSA is also known to undergo conformational transformation at different pH(s) and temperatures. In this report we have studied the binding interactions of a photosensitizing drug, protoporphyrin IX (PPIX) with various conformers of HSA at different temperatures using picosecond time-resolved fluorescence spectroscopy. Also, using dynamic light scattering (DLS) and circular dichroism (CD) spectroscopy we have followed the structural transition of various conformers of HSA at different temperatures. Ensuring the intact binding of PPIX to various conformers of HSA at different temperatures as revealed through time-resolved fluorescence anisotropy decay and significant spectral overlap of emission of Trp214 residue (donor) in domain-IIA and absorption of PPIX (acceptor) bound to domain-IB of HSA, we have applied F?rster's resonance energy transfer (FRET) technique to determine the interdomain separation under various environmental conditions. The alkali-induced conformer of HSA shows almost no change in donor-acceptor distance in contrast to the native and acid-induced conformers of HSA, which show a decrease in distance with increase in temperature. Through this study the non-covalently bound PPIX is shown to be an efficient FRET probe in reporting the different temperature-induced folded states of HSA in buffer solutions of widely differing pH values.     

LC–MS Simultaneous Determination of Itopride Hydrochloride and Domperidone in Human Plasma

A rapid, simple, sensitive and specific liquid chromatography–tandem mass spectrometry method was developed and validated for simultaneous quantification of itopride hydrochloride and domperidone in human plasma. Both drugs were extracted by liquid–liquid extraction with ethyl acetate and saturated borax solution. The chromatographic separation was performed on a reversed-phase C18 column with a mobile phase of water–methanol (2:98, v/v) containing 0.5% formic acid. The protonated analyte was quantitated in positive ionization by multiple reaction monitoring with a mass spectrometer. The assay exhibited linearity over the concentration range of 3.33–500 ng mL^?1 for itopride hydrochloride and 3.33–100 ng mL^?1 for domperidone in human plasma. The precursor to product ion transitions of m/z 359.1–72.3 and 426.0–147.2 were used to measure itopride hydrochloride and domperidone respectively. The method was found suitable for the analysis of plasma samples collected during phase 1 pharmacokinetics study of itopride HCl 50 mg and domperidone 20 mg in 12 healthy volunteers after single oral doses of the combination drug.     

Dioxomolybdenum(VI) and dioxotungsten(VI) complexes supported by an amido ligand

Stepwise addition of one equivalent of n-butyllithium and trimethylsilyl chloride to 2-tert-butylmercaptoaniline affords the new ligand 1-(Me3SiNH)-2-(t-BuS)C6H4 (LH), that reacts with one equivalent of butyllithium to its lithium salt LLi. Dioxodichloromolybdenum [MoO2Cl2] and dioxodichlorotungsten dimethoxyethane [WO2Cl2(dme)] react in tetrahydrofuran solution at low temperature with two equivalents LLi to monomeric dioxomolybdenum(VI) [MoO2L2] (1) and dioxotungsten(VI) complex [WO2L2] (2) employing two bidentate amido thioether ligands. The crystallographic determination of the molecular structures of 1 and 2 show evidence for M...S contacts. The reaction of [MoO2Cl2] with LLi in tetrahydrofuran solution at room temperature leads next to 1 to two compounds where silyl group migration from nitrogen to oxygen atoms occurs forming [Mo(=NL')2(OSiMe)2] (3) and [Mo(=NL')2(OSiMe3)L] (4, L' = N-2-t-BuSC6H4) as determined by NMR spectroscopy. Compound 4 was isolated in low yield and its molecular structure determined by X-ray crystallography. Higher yields of a bisimido complex can be obtained by the direct reaction of one equivalent of LLi with [Mo(NAr)2Cl2(dme)] (Ar = 2,6-Me2C6H4) forming [Mo(NAr)2LCl] (5).     

The unambiguous synthesis and NMR assignment of 4-alkoxy and 3-alkylquinazolines

Contrary to a number of reports, alkylations of the privileged 3,4-dihydroquinazoline scaffold provide N3-alkylated products, and not 4-alkoxyquinazolines. To correctly assign the structure, ¹³C NMR shifts of the –Z–CH_n– (Z=O, N) fragment are necessary; resonances in the 45–55 ppm range are indicative of N3-alkylation. Treatment of 3,4-dihydroquinazoline-4-one with p-TsCl afforded the N3-tosylated compound, whose reaction with an amine yielded the corresponding N3-alkyl derivative. A mechanism corroborated by ¹⁵N-labeling involving pyrimidine ring opening and recyclisation is proposed. Finally, the unambiguous preparation of 4-alkoxyquinazolines is described via treatment of 3,4-dihydroquinazoline-4-ones with PCl₅ followed by an alkoxide.     

Solvent effects on the rate of thermolysis of lauroyl peroxide

Thermolysis of lauroyl peroxide in various organic solvents was studied. It was shown that the primary homolytic dissociation of the peroxide group is accompanied by secondary reactions of chain-induced decomposition. The reaction medium affects the rate of both the primary homolytic dissociation and secondary induced decomposition processes. Correlation equations between the rate constants of the reactions in study and the physicochemical parameters of the solvents were proposed.     

Fisetin Inhibits UVB‐induced Cutaneous Inflammation and Activation of PI3K/AKT/NFκB Signaling Pathways in SKH‐1 Hairless Mice

Solar ultraviolet B (UVB) radiation has been shown to induce inflammation, DNA damage, p53 mutations and alterations in signaling pathways eventually leading to skin cancer. In this study, we investigated whether fisetin reduces inflammatory responses and modulates PI3K/AKT/NFκB cell survival signaling pathways in UVB‐exposed SKH‐1 hairless mouse skin. Mice were exposed to 180 mJ cm^?2 of UVB radiation on alternate days for a total of seven exposures, and fisetin (250 and 500 nmol) was applied topically after 15 min of each UVB exposure. Fisetin treatment to UVB‐exposed mice resulted in decreased hyperplasia and reduced infiltration of inflammatory cells. Fisetin treatment also reduced inflammatory mediators such as COX‐2, PGE₂ as well as its receptors (EP1–EP4) and MPO activity. Furthermore, fisetin reduced the level of inflammatory cytokines TNFα, IL‐1β and IL‐6 in UVB‐exposed skin. Fisetin treatment also reduced cell proliferation markers as well as DNA damage as evidenced by increased expression of p53 and p21 proteins. Further studies revealed that fisetin inhibited UVB‐induced expression of PI3K, phosphorylation of AKT and activation of the NFκB signaling pathway in mouse skin. Overall, these data suggest that fisetin may be useful against UVB‐induced cutaneous inflammation and DNA damage.     

Development and validation of an LC-ESI-MS/MS method for simultaneous quantitation of olmesartan and pioglitazone in rat plasma and its pharmacokinetic application

A simple, high‐throughput and specific high‐performance liquid chromatography tandem mass spectrometry method has been developed and validated according to the FDA guidelines for simultaneous quantification of olmesartan and pioglitazone in rat plasma. The bioanalytical method consists of liquid–liquid extraction and quantitation by triple quadrupole mass spectrometry using electrospray ionization technique, operating in multiple reaction monitoring and positive ion modes. The compounds were eluted isocratically on a C₁₈ column with a mobile phase consisting of a mixture of methanol and water (containing 0.5% formic acid) in a ratio of 9:1. The response to olmesartan and pioglitazone was linear over the range 0.01–10 µg/mL. The validation results demonstrated that the method had satisfactory precision and accuracy across the calibration range. Intra‐ and inter‐day precisions ranged from 0.66 to 3.32 and from 0.94 to 2.93% (%CV), respectively. The accuracy determined at three quality control levels was within 91.27–107.28%. There was no evidence of instability of the analytes in rat plasma following the stability studies. The method proved highly reproducible and sensitive and was successfully applied in a pharmacokinetic study after single dose oral administration of olmesartan and pioglitazone to the rat. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of multifunctional metal- and metal oxide core@mesoporous silica shell structures by using a wet chemical approach

We demonstrate a facile wet chemical approach for fabricating spherical metal/metal-oxide core@mesoporous silica shell hybrid nanoparticles with different core and shell thicknesses. Vertically aligned mesoporous silica (mSiO(2) ) shells were fabricated over the pre-synthesized spherical SiO(2) nanoparticles through a three-step strategy: 1)?synthesis of core materials, 2)?covering the core with an organic-inorganic composite layer, and 3)?removing the organic template through calcinations in air. The mechanisms of hybrid structure formation are proposed. The multifunctional nature of the hybrid structures could be induced by incorporating guest ions/molecules, such as Ag, Mn, and TiO(2) , into the pores of an mSiO(2) shell. Mn and TiO(2) cluster- incorporated composite structures have been tested to be antioxidizing agents and effective photocatalysts through electron spin resonance, radical scavenging tests, and the photocatalytic degradation of rhodamine B. The possibility of incorporating several hetero-element guest clusters in these mesoporous composite particles makes them highly attractive for multifunctional applications.