Imaging of Bacterial and Fungal Cells Using Fluorescent Carbon Dots Prepared from <Emphasis Type="Italic">Carica papaya</Emphasis> Juice

In this paper, we have described a simple hydrothermal method for preparation of fluorescent carbon dots (C-dots) using Carica papaya juice as a precursor. The synthesized C-dots show emission peak at 461 nm with a quantum yield of 7.0 %. The biocompatible nature of C-dots was confirmed by a cytotoxicity assay on E. coli. The C-dots were used as fluorescent probes for imaging of bacterial (Bacillus subtilis) and fungal (Aspergillus aculeatus) cells and emitted green and red colors under different excitation wavelengths, which indicates that the C-dots can be used as a promising material for cell imaging.     

The water‐promoted Diels–Alder reaction in quaternary ammonium salts

Prevailing classification of salts based on their effect in solubility and stability of proteins in aqueous solution predicts that tetraalkylammonium salts, guanidinium chloride (GnCl), LiClO₄ act as salting‐in (S/I) and LiCl, NaCl act as salting‐out (S/O) in aqueous conditions. In the same context the behaviour of GnCl, LiClO₄ and LiCl are contradictory in polar solvents like ethylene glycol and formamide. In these solvents, expected salt effect shows just opposite nature from their usual expectation. However, in the aqueous solution salts like tetraalkylammonium halide (R₄NX, R = alkyl group, X = Br group) behave like salting‐in salts. The physicochemical origin of the salting in effect of R₄NX type of salts has been discussed elaborately in the present work. The role of cations in terms of substitution of various alkyl groups on R₄NX has been systematically presented here on the basis of experimental kinetic and thermodynamic studies. The abnormal behaviour of R₄NX salts in aqueous solution has also been explained by the Setschenov equation (k_s) and Δμ_solvation values, which highlights their individual nature out of common properties of R₄NX. Copyright © 2015 John Wiley & Sons, Ltd.     

Coulomb screening in graphene with topological defects

We analyze the screening of an external Coulomb charge in gapless graphene cone, which is taken as a prototype of a topological defect. In the subcritical regime, the induced charge is calculated using both the Green’s function and the Friedel sum rule. The dependence of the polarization charge on the Coulomb strength obtained from the Green’s function clearly shows the effect of the conical defect and indicates that the critical charge itself depends on the sample topology. Similar analysis using the Friedel sum rule indicates that the two results agree for low values of the Coulomb charge but differ for the higher strengths, especially in the presence of the conical defect. For a given subcritical charge, the transport cross-section has a higher value in the presence of the conical defect. In the supercritical regime we show that the coefficient of the power law tail of polarization charge density can be expressed as a summation of functions which vary log periodically with the distance from the Coulomb impurity. The period of variation depends on the conical defect. In the presence of the conical defect, the Fano resonances begin to appear in the transport cross-section for a lower value of the Coulomb charge. For both sub and supercritical regime we derive the dependence of LDOS on the conical defect. The effects of generalized boundary condition on the physical observables are also discussed.     

Gold Decorated Graphene by Laser Ablation for Efficient Electrocatalytic Oxidation of Methanol and Ethanol

A well‐known limitation in the fabrication of metal‐graphene composite has been the use of surfactants that strongly adsorb on the surface and reduce the performance of the catalyst. We demonstrate here a novel one‐pot synthesis of gold nanoparticles by laser ablation of gold strip and in‐situ decoration on graphene substrate. Not only the impregnation of nanoparticles was linker free, but also the synthesis by itself was surfactant‐free. The composite materials were well characterized morphologically and functionally using electron microscopy, X‐ray and electron diffraction, Raman spectroscopy, Zeta potential, electrochemical measurements and UV‐Visible spectroscopic techniques. This linker‐free gold‐graphene based composite has been employed for catalytic applications pertaining to electrooxidation. We have explored the use of this composite as a binder‐free electrode in electrocatalytic oxidation of methanol and ethanol in alkaline medium. Additionally, the onset potential for ethanol oxidation was found to be more negative, ?100 mV, an indication of its promising application in direct ethanol fuel cells.     

Curing and thermal behaviour of a flame retardant cycloaliphatic epoxy resin based on phosphorus containing poly(amide–imide)s

The curing behaviour of 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate was investigated by the dynamic differential scanning calorimetry (DSC) using phosphorus-containing poly(amide–imide)s (PAIs) having free amine groups, 4,4′-diaminodiphenylmethane (PM) and p-phenylenediamine (PA), in the ratio of 1:1. The PAIs were prepared by co-polymerization of diimide–diacid (DIDA) and phosphorus-containing triamines having phenylene moiety. l-Tryptophan and pyromellitic anhydride were used to synthesize DIDA. Triamines used in the synthesis PAIs were tris(3-aminophenyl) phosphine (TAP), tris(3-aminophenyl) phosphine oxide (TAPO) and bis(3-aminophenyl) aminotolyl phosphine (BAP). TAP-, TAPO- and BAP-containing PAIs were designated as PTAP, PTAPO and PBAP, respectively. These PAIs with free amine groups were characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopic techniques and elemental analysis. The mixture of PAIs and PM or/and PA in the ratios of 0:1, 1:0 and 0.5:0.5 was used for investigation. DSC was used to study the curing of epoxy by recording the DSC scans at heating rates of 10 °C min^?1. Thermal stability of epoxy resin cured isothermally was evaluated by recording thermo gravimetric traces in nitrogen atmosphere at the heating rate of 20 °C min^?1. All samples are highly stable, and the 10 % mass loss found was in the range of 335–520 °C. The percent char yield was highest in case of resin sample E/PM/PTAPO. The flame-retardant properties of cured epoxy resins were investigated by the limiting oxygen index test (LOI) and UL94 test. When phosphorus was incorporated in epoxy resin, the epoxy resin system met the UL94 V-0 classification and the LOI reached at 37.8, because of nitrogen–phosphorus synergistic effect.     

Molecular interactions between amine and cyclic ketones at different temperatures

Measurement of densities ρ, viscosities η, and ultrasonic speeds u has been carried out for binary mixtures of N,N-diethylaniline (N,N-DEA) with acetophenone, cyclopentanone, cyclohexanone (CH), and 2-methylcyclohexanone (Me-CH) and their pure liquids at (303.15 and 308.15) K. These experimental data have been used to calculate the excess molar volume V ^E, deviation in ultrasonic velocity ?u, deviation in isentropic compressibility ?κ _s , and deviation in viscosity ?η. The variation of these properties with composition of the mixtures suggests dipole–dipole interactions and charge-transfer complex formation between N,N-diethylaniline and dipolar ketones. The magnitude of the property is found to depend on the chain length of the ketones’ molecule. The viscosity data have been correlated using three equations: Grunberg and Nissan (Nature 164:799–800, 1949), Katti and Chaudhri (J Chem Eng Data 9:442–443, 1964), and Hind et al. (Trans Faraday Soc 56:328–330, 1960). These results have been fitted to the Redlich–Kister polynomial using multiparametric nonlinear regression analysis to estimate the binary coefficients and standard errors.     

Thermally stimulated discharge current (TSDC) characteristics in β-phase PVDF–BaTiO3 nanocomposites

β-phase polyvinylidene fluoride (PVDF)–BaTiO₃ nanocomposite samples have been prepared by solution mixing method. XRD data represent that the crystallinity of PVDF decreases with increase in loading level of BaTiO₃ nanoparticles. DSC curve represents that the melting point of PVDF is lightly affected by loading concentration of BaTiO₃. The morphology and microstructure of PVDF and PVDF embedded by BaTiO₃ nanofillers were investigated by using inverted contrast microscopy (ICM) and scanning electron microscopy (SEM). FTIR interferrometry is proven that PVDF and BaTiO₃ are not chemically interacting; therefore, interaction of BaTiO₃ is van der Waals type of interaction. The thermally stimulated discharge current (TSDC) of PVDF and PVDF–BaTiO₃ nanocomposites sample was characterized by single peak. The observed TSDC peak is discussed on the basis of dipolar and interfacial polarization.     

Zinc‐Catalyzed Borylation of Primary,Secondary and Tertiary Alkyl Halides with Alkoxy Diboron Reagents at Room Temperature

A new catalytic system based on a Zn^II NHC precursor has been developed for the cross‐coupling reaction of alkyl halides with diboron reagents, which represents a novel use of a Group XII catalyst for C? X borylation. This approach gives borylations of unactivated primary, secondary, and tertiary alkyl halides at room temperature to furnish alkyl boronates, with good functional‐group compatibility, under mild conditions. Preliminary mechanistic investigations demonstrated that this borylation reaction seems to involve one‐electron processes.