New Effective Synthetic Method for Preparation of N,N-Dichlorocarbamates

A rapid, efficient, economical, and easy-to-scale method for the effective conversion of carbamates to corresponding N,N-dichlorocarbamates by using sodium hypochlorite in acidic medium has been described. N,N-Dichlorocarbamates were obtained in quantitative yield through a simple workup in reduced reaction time.

Ruthenium catalyzed desymmetrization of diazabicyclic olefins to access heteroaryl substituted cyclopentenes through C–H activation of phenylazoles

The first ruthenium catalyzed redox-neutral C–H activation strategy for the ring-opening of diazabicyclic olefins via C–H bond cleavage of phenyl azoles is reported. The developed method offers a novel route to functionalized cyclopentenes by employing less-expensive ruthenium catalyst and readily accessible biologically significant heteroarenes. The present protocol is a merger of the C–H activation of phenyl substituted heteroaromatics and subsequent β-nitrogen elimination of diazabicyclic olefins.     

Electrospray ionization-ion mobility spectrometry: a rapid analytical method for aqueous nitrate and nitrite analysis

This paper reports the first example of electrospray ionization (ESI) for the separation and detection of anions in aqueous solutions by ion mobility spectrometry (IMS). Standard solutions of arsenate, phosphate, sulfate, nitrate, nitrite, chloride, formate, and acetate were analyzed using ESI-IMS and distinct peak patterns and reduced mobility constants (K(0)) were observed for respective anions. Real world water samples were analyzed for nitrate and nitrite to determine the feasibility of using ESI-IMS as a rapid analytical method for monitoring nitrate and nitrite in water systems. The data showed satisfactory correlation between the measured value ([similar]0.16 ppm) and the reported maximum nitrate-nitrogen concentration (0.2 ppm) found in a local drinking water system. For on-site measurement applications, direct sample introduction and air as an alternate drift gas to nitrogen were evaluated. The identities of the nitrite and nitrate mobility peaks were verified by comparison of reduced mobility constants with mass identified nitrate and nitrite ions reported in literature. In the mixing ratio, a linear dynamic range of 3 orders of magnitude and instrument detection limits of 10 ppb for nitrate and 40 ppb for nitrite were obtained. The calibration curves showed r(2) value of 0.98 and slope of 0.06 for nitrate and r(2) value of 0.99 and slope of 0.11 for nitrite.     

Isolation of a Dosage Dependent Lethal Mutation in Ubiquitin Gene of Saccharomyces Cerevisiae

Summary: Ubiquitin is a small protein with a highly conserved sequence, playing a pivotal role in ubiquitin proteasome system (UPS). Considering the central role UPS has in cellular homeostasis, several drugs have been developed to target UPS to remove cells responsible for cancer and other neurodegenerative diseases. As an alternative to the above approach, in the present study we have isolated dose dependent lethal form of ubiquitin gene by in vitro evolution. In vitro evolution is a powerful tool for developing proteins with novel and desirable properties. The ubiquitin gene of Saccharomyces cerevisiae was subjected to in vitro evolution and lethal mutations were selected. The ubiquitin of S. cerevisiae differs only by three residues from human ubiquitin. The mutants were selected by expressing the protein in temperature sensitive ubi4 deletion mutants of ubiquitin. Most of the mutations in ubiquitin gene failed to complement UBI4 phenotype under heat shock. Only one of the mutants caused cell lysis, even at permissive temperature. Interestingly, expression of the same protein in wild type S. cerevisiae cells left them unaffected, establishing the mutant protein as a competitive inhibitor for UPS. Sequencing of the mutant gene showed four completely novel amino acid substitutions. They are namely, Ser20 to Phe, Ala46 to Ser, Leu50 to Pro and Ile61 to Thr. Construction of the mutant ubiquitin gene and characterization of the mutant phenotype along with the nature and location of the mutations are presented.     

Designing of multiwalled carbon nanotubes reinforced low density polyethylene nanocomposites for suppression of electromagnetic radiation

High aspect ratio multi-walled carbon nanotubes (MWCNTs) reinforced low density polyethylene (LDPE) composites were prepared by solvent casting followed by compression molding technique. Electromagnetic interference (EMI) shielding effectiveness (SE) of these composites was investigated in the frequency range of 12.4?C18 GHz (Ku-band) for the first time. The experimental results indicate that the EMI-SE of these composites is sensitive to the MWCNT loading. The average value of EMI-SE reaches 22.4 dB for 10 wt% MWCNT-LDPE composites, indicating the usefulness of this material for EMI shielding in the Ku-band. The main reason for improved SE has been attributed to significant improvement in the electrical conductivity of the composites by 20 orders of magnitude, i.e., from 10^?20 for pure LDPE to 0.63 S/cm for MWCNT-LDPE, which is three order of magnitude higher than the previous reports for MWCNT-LDPE composites. Differential scanning calorimetry of the MWCNT-LDPE composites showed around 37% improvement in the crystalline contents over pure LDPE samples which resulted into enhanced thermal stability of the composites. The thermal decomposition temperature of LDPE is shifted by 40 °C on addition of 5 wt% MWCNT. The studies therefore show that these composite can be used as light weight, thermally stable EMI shielding, and antistatic material.     

C?H Bond Activation by Metal–Superoxo Species: What Drives High Reactivity?

Metal–superoxo species are ubiquitous in metalloenzymes and bioinorganic chemistry and are known for their high reactivity and their ability to activate inert C H bonds. The comparative oxidative abilities of M–O₂^.− species (M=Cr^III, Mn^III, Fe^III, and Cu^II) towards C H bond activation reaction are presented. These superoxo species generated by oxygen activation are found to be aggressive oxidants compared to their high‐valent metal–oxo counterparts generated by O⋅⋅⋅O bond cleavage. Our calculations illustrate the superior oxidative abilities of Fe^III– and Mn^III–superoxo species compared to the others and suggest that the reactivity may be correlated to the magnetic exchange parameter.     

A new pivot selection rule for the network simplex algorithm

We present a new network simplex pivot selection rule, which we call theminimum ratio pivot rule, and analyze the worst-case complexity of the resulting network simplex algorithm. We consider networks withn nodes,m arcs, integral arc capacities and integral supplies/demands of nodes. We define a {0, 1}-valued penalty for each arc of the network. The minimum ratio pivot rule is to select that eligible arc as the entering arc whose addition to the basis creates a cycle with the minimum cost-to-penalty ratio. We show that the so-defined primal network simplex algorithm solves minimum cost flow problem within O(nΔ) pivots and in O(Δ(m + n logn)) time, whereΔ is any upper bound on the sum of all arc flows in every feasible flow. For assignment and shortest path problems, our algorithm runs in O(n ²) pivots and O(nm +n ² logn) time.     

Machine learning-based modeling to predict inhibitors of acetylcholinesterase

Molecular Diversity - Acetylcholinesterase enzyme is responsible for the degradation of acetylcholine and is an important drug target for the treatment of Alzheimer’s disease. When this...     

A combined experimental and computational study on the sulfoxidation by high-valent iron bispidine complexes

Iron-bispidine complexes are efficient catalysts for the oxidation of thioanisole to phenylmethylsulfoxide with iodosylbenzene as oxidant. With the tetradentate bispidine ligand L(1) (L(1) = 2,4-pyridyl-3,7-diazabicyclo[3.3.1]nonane)) the catalytic efficiency is smaller than with the pentadentate bispidine ligand L(2) (L(2) = 2,4-pyridyl-7-(pyridine-2-ylmethyl)-3,7-diazabicyclo[3.3.1]nonane)). Based on the redox potentials (iron complexes with L(1) are stronger oxidants than with L(2)) and known efficiencies in catalytic olefin oxidation and C-H activation reactions, the expectations were different. A DFT-based analysis is used to explain the apparent contradiction, and this is based on differences in the electronic ground states of the ferryl complexes as well as in the oxygen transfer transition states.     

Glutaraldehyde Crosslinked Gelatin with Polyacrylamide Grafts

Persulfate-initiated grafting of crosslinked gelatin with acrylamide in aqueous medium is investigated. the high percentages of grafting are explained as a direct consequence of the heterophase nature of grafting. Optimum reaction conditions for a high percentage of grafting together with low homopoymer yields are discussed.