废轮胎回转窑中试热解油的理化性质

研究了回转窑中试反应器中废轮胎热解所得液体产物油的品质。热解反应在中温段(450℃～650℃)进行，油产率在500℃有最大值45.1%，此后随温度升高而呈下降趋势。对热解油的品质进行了考察，获取了热解油的完整实沸点蒸馏曲线。结果表明，热解油品质较轻，200℃以下轻馏分总量高达33%～40%，而且热解温度的升高也有助于增加轻馏分含量。对各馏分进一步的FT-IR分析显示，较高热解温度下热解油具有较强的芳香性，并可从谱图中识别出苯、萘及其烷基衍生物等芳香类物质。600 ℃和500 ℃热解油低馏分FT-IR分析结果体现了热解芳烃类物质生成的Diels-Alder反应途径。     

城市生活垃圾典型有机组分混合热解特性的研究

利用自行设计的较大物量(约10 g)的热重分析装置对城市生活垃圾典型有机组分（纸屑、木屑、织物、塑料、橡胶、厨余）的混合热解特性进行了实验研究，并用最小二乘法计算得到由若干平行反应组成的热解反应动力学模型，实验结果与模型计算结果吻合较好。在此基础上对城市生活垃圾典型有机组分混合热解中的交互影响和非线性规律进行了分析。结果表明，城市生活垃圾典型有机组分混合热解动力学模型由2个～4个平行反应组成；混合热解中有反应发生合并的现象；热效应和组分比例对混合物综合热解特性有显著影响。     

神木煤灰自身固硫的微观特性分析

当管式炉温由800 ℃升高到1 200 ℃时，神木煤灰的自身固硫率由63.5%降低到6.4%。晶相组成、孔隙结构和表面形态分析表明，800 ℃煤灰自身固硫渣样中CaSO4的质量分数高达18%，CaCO3和CaO的质量分数高达22.4%。渣样表面呈蓬松的棉絮状结构，颗粒内部有许多均匀密布的细小孔隙。1 200 ℃渣样中的CaSO4已全部分解，并且不存在任何CaCO3或CaO晶相，渣样表面由许多结构密实、表面光滑的块状颗粒组成，带有明显的烧结胀大和高温熔融的痕迹。1 200 ℃渣样的比表面积、孔容积和平均孔径等比800 ℃时急剧减小。     

Terphenyl ligand stabilized lead(II) derivatives: steric effects and lead-lead bonding in diplumbenes

The reaction of PbBr(2) with the lithium reagents LiC(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2) (LiArPr(i)(2)) and Et(2)O.LiC(6)H(3)-2,6-(2,6-Pr(i)-4-Bu(t)C(6)H(2))(2) (Et(2)O.LiArPr(i)(2)Bu(t)) furnished the bromide bridged organolead(II) halides [Pb(mu-Br)ArPr(i)(2)](2) (1) and[Pb(mu-Br)ArPr(i)(2)Bu(t)](2) (2) as orange crystals. Treatment of 1 with a stoichiometric amount of methylmagnesium bromide resulted in the "diplumbene" Pr(i)(2)Ar(Me)PbPb(Me)ArPr(i)(2) (3). The addition of 1 equiv of 4-tert-butylphenylmagnesium bromide to 1 afforded the feebly associated, Pb-Pb bonded species [Pb(C(6)H(4)-4-Bu(t))ArPr(i)(2)](2) (4), whereas the corresponding reaction of tert-butylmagnesium chloride and 1 afforded the monomer Pb(Bu(t))ArPr(i)(2) (5). The reaction of the more crowded aryl lead(II) bromide [Pb(mu-Br)ArPr(i)(3)](2) (Ar = C(6)H(3)-2,6(C(6)H(2)-2,4,6-Pr(i)(3))(2)) with 4-isopropyl-benzylmagnesium bromide or LiSi(SiMe(3))(3) yielded the monomers 6, [Pb(CH(2)C(6)H(4)-4-Pr(i))ArPr(i)(3)], or 7, [Pb(Si(SiMe(3))(3))ArPr(i)(3)]. All compounds were characterized with use of X-ray crystallography, (1)H, (13)C, and (207)Pb NMR (3-7), and UV-vis spectroscopy. The dimeric Pb-Pb bonded (Pb-Pb = 3.1601(6) A) structure of 3 may be contrasted with the previously reported monomeric structure of Pb(Me)ArPr(i)(3), which differs from 3 only in that it has para Pr(i) substituents on the flanking aryl rings. The presence of these groups is sufficient to prevent the weak Pb-Pb bonding seen in 3. The dimer 4 displays a Pb-Pb distance of 3.947(1) A, which indicates a very weak lead-lead interaction, and it is possible that this close approach could be caused by packing effects. The monomeric structures of 6 and 7 are attributable to steric effects and, in particular, to the large size of ArPr(i)(3).     

Validating methods for measuring delta18O and delta13C in otoliths from freshwater fish

The ability of the phosphoric acid digestion technique to extract carbon dioxide from biogenic carbonates and reliably reproduce delta(18)O and delta(13)C signatures from standard reference materials (NBS-18, NBS-19) was tested and shown to produce accurate, unbiased measurements of non-biologic materials. The effects of roasting preparation methods commonly reported when analyzing biogenic carbonates were also tested in a series of experiments using reference standards and otoliths obtained from aquacultured Arctic charr and rainbow trout. Roasting had no effect on the isotope measurement of reference standards. No significant differences between mean oxygen isotope signatures from paired experiments with roasted and non-roasted fish otoliths were found. However, otolith oxygen isotope measurements were significantly enriched in comparison to rearing water-based measurements for both species. Agreement between expected isotopic equilibrium and measured otolith delta(18)O values varied as a function of roasting temperature and between species. Criteria for the selection of appropriate roasting temperatures are suggested and favour 350 degrees C in freshwater fish where unbiased estimates of average rearing water temperatures and known differences in rearing temperatures were obtained. Carbon isotopic disequilibria were observed for both species. A mixing model analysis established differences in the percentage of metabolically derived carbon in studied otoliths, with Arctic charr deriving a greater proportion of otolith delta(13)C from metabolism as a result of higher metabolic rates.     

Cells in Sol-Gels I: A Cytocompatible Route for the Production of Macroporous Silica Gels

A novel, high hydrolysis ratio sol-gel route for the biocompatible production of macroporous silica gels is presented. This route exploits the two step nature of the gelation reaction to remove undesired alcohol by-products from an acidic aqueous sol prior to gelation. These alcohol-free sols will gel when the pH is raised to the physiologic range in a two-step, acid/base catalyzed process. Furthermore, monolithic macroporous samples can be produced in a controlled manner by introducing water-soluble organic polymers into the sol.     

Determination of energy transfer and upconversion constants for Yb~(3+)/Er~(3+) codoped phosphate glass

<正>The energy transfer and cooperation upconversion processes are investigated in Yb~(3+)/Er~(3+) codoped phosphate glass.Based on the measured curves of output power versus incident power,the laser and spectroscopic parameters of the glass are fitted and analyzed.We focus on the resonant energy transfer constant k from Yb~(3+) to Er~(3+) as well as the cooperation upconversion coefficient C_(up) from ~4I_(13/2) of Er~(3+).The fitted k and C_(up) can give almost the same results for different thicknesses of glass disk with the same doping concentrations.The determination of these parameters is helpful for the development of Yb~(3+)/Er~(3+) codoped laser glass.