Determination of 3‐α‐hydroxytibolone in human plasma by LC‐MS/MS: application for a pharmacokinetic study after administration of a tibolone formulation

A new method was developed for the quantitation of 3‐α‐hydroxy tibolone, in human plasma, after oral administration of a tablet formulation containing tibolone (2.5 mg). 3‐α‐Hydroxy tibolone was extracted by a liquid–liquid procedure, using cyproterone acetate as internal standard and chlorobutane as extraction solvent. After extraction, samples were submitted to a derivatization step with p‐toluenesulfonyl isocyanate. A mobile phase consisting of acetonitrile and water (72:28 v/v) was used and chromatographic separation was achieved using Agilent XDB C₁₈ column (100 × 4.6 mm i.d.; 5 µm particle size), at 40°C. Mass spectrometric detection was performed using atmospheric pressure chemical ionization in negative mode for 3‐α‐hydroxy tibolone and in positive mode for cyproterone acetate. The fragmentation transitions were m/z 510.2 → m/z 170.1 and m/z 417.0 → m/z 357.1 for 3‐α‐hydroxy tibolone and cyproterone acetate, respectively. Calibration curves were constructed over the range 100–30,000 pg/mL and the method was shown to be specific, precise and accurate, with a mean recovery rate of 94.2% for 3‐α‐hydroxy tibolone. No matrix effect or carry‐over was detected in the samples. The validated method was applied in a pharmacokinetic study with a tibolone formulation in healthy female volunteers. Copyright © 2013 John Wiley & Sons, Ltd.     

Adsorption of benzene-1,4-dithiol on the Au(111) surface and its possible role in molecular conductance

It is a consensus in the field of molecular electronics that the transport of charge across a single molecule depends sensitively on the details of the interaction between the molecule and the metallic leads, such as the molecular orientation. To advance the design of complex molecular devices, it is crucial to have a detailed understanding of these many aspects that influence the electron transport. A simple system that has been used as a paradigm of the class of conjugated aryl molecules is the benzene-1,4-dithiol (BDT). However, we still do not have a full understanding of the BDT transport experiments. Usually the geometries considered in transport calculations assumed that the BDT was connected to the two Au leads via the S atoms, and that the molecule was either perpendicular or close to a perpendicular configuration relative to the Au surfaces. Using ab initio calculations, we show that, for an isolated molecule, the configuration with largest adsorption energy has the BDT phenyl ring closer to being parallel to the surface, and we then argue, based on nonequilibrium Green's function-density functional theory calculations, that, depending on the experimental procedure, this may be the relevant configuration to be used in the transport calculations.     

Determining the quality of insulating oils using near infrared spectroscopy and wavelength selection

This study presents an analytical method for determining interfacial tension and relative density in insulating oils using near infrared spectrometry (NIR). Five different strategies of regression were evaluated: partial least squares (PLS) with significant regression coefficients selected by jack-knife algorithm; interval PLS (iPLS); multiple linear regression (MLR) with variable selection by genetic algorithm (MLR/GA), successive projections algorithm (MLR/SPA) and stepwise strategy (SR/MLR). The overall results point to MLR/SPA as the best modeling strategy. The strategy is simpler and uses fewer spectral variables.     

Synthesis,Ferroelectric and Optical Properties of (Pb,Ca)TiO3 Thin Films by Soft Solution Processing

Calcium modified lead titanate sol was synthesized using a soft solution processing, the so-called polymeric precursor method. In soft chemistry method, soluble precursors such as lead acetate trihydrate, calcium carbonate and titanium isopropoxide, as starting materials, were mixed in aqueous solution. Pb_0.7Ca_0.3TiO₃ thin films were deposited on platinum-coated silicon and quartz substrates by means of the spinning technique. The surface morphology and crystal structure, dielectric and optical properties of the thin films were investigated. The electrical measurements were conducted on metal-ferroelectric-metal (MFM) capacitors. The typical measured small signal dielectric constant and dissipation factor at a frequency of 100 kHz were 299 and 0.065, respectively, for a thin film with 230 nm thickness annealed at 600°C for 2 h. The remanent polarization (2P_r) and coercive field (E _c) were 32 C/cm² and 100 kV/cm, respectively. Transmission spectra were recorded and from them, refractive index, extinction coefficient, and band gap energy were calculated. Thin films exhibited good optical transmissivity, and had optical direct transitions. The present study confirms the validity of the DiDomenico model for the interband transition, with a single electronic oscillator at 6.858 eV. The optical dispersion behavior of PCT thin film was found to fit well the Sellmeir dispersion equation. The band gap energy of the thin film, annealed at 600°C, was 3.56 eV. The results confirmed that soft solution processing provides an inexpensive and environmentally friendly route for the preparation of PCT thin films.     

Validated dispersive liquid-liquid microextraction for analysis of organophosphorous pesticides in water

Dispersive liquid-liquid microextraction (DLLME) combined with gas chromatography and mass spectrometry (GC-MS) was applied to the determination of six organophosphorous pesticides (OPPs) in water samples. The analytes included in this study were prophos, diazinon, chlorpyrifos methyl, methyl parathion, fenchlorphos and chlorpyrifos. Several extraction and dispersion solvents were tested for dispersive liquid-liquid microextraction of these analytes and the best results were obtained using chloroform as extraction solvent and 2-propanol as dispersion solvent. Calibration curves of the analytes in water samples were constructed in the concentration range from 100 to 1100 ng/L for prophos, diazinon and methyl parathion and in the range from 100 to 1000 ng/L for chlorpyrifos methyl, fenchlorphos and chlorpyrifos. Limits of detection (LODs) were in the range of 1.5-9.1 ng/L and limits of quantification (LOQs) were in the range of 5.1-30.3 ng/L, below the maximum admissible level for drinking water. Relative standard deviations (RSDs) were between 6.5 and 10.1% in the concentration range of 100-1000 ng/L. The relative recoveries (%RRs) of tap, well and irrigation water samples fortified at 800 ng/L were in the range of 46.1-129.4%, with a larger matrix effect being detected in tap water.     

Selective Cytotoxicity of Portuguese Propolis Ethyl Acetate Fraction towards Renal Cancer Cells

Renal cell carcinoma is the most lethal cancer of the urological system due to late diagnosis and treatment resistance. Propolis, a beehive product, is a valuable natural source of compounds with bioactivities and may be a beneficial addition to current anticancer treatments. A Portuguese propolis sample, its fractions (n-hexane, ethyl acetate, n-butanol and water) and three subfractions (P1–P3), were tested for their toxicity on A498, 786-O and Caki-2 renal cell carcinoma cell lines and the non-neoplastic HK2 kidney cells. The ethyl acetate fraction showed the strongest toxicity against A498 (IC₅₀ = 0.162 µg mL⁻¹) and 786-O (IC₅₀ = 0.271 µg mL⁻¹) cells. With similar toxicity against 786-O, P1 (IC₅₀ = 3.8 µg mL⁻¹) and P3 (IC₅₀ = 3.1 µg mL⁻¹) exhibited greater effect when combined (IC₅₀ = 2.5 µg mL⁻¹). Results support the potential of propolis and its constituents as promising coadjuvants in renal cell carcinoma treatment.     

Synthesis and crystal structure of the N4-oxide of an hydroxybenzo[f]quinoxalin-6(5H)-one obtained by oxidative cleavage of beta-lapachone-quinoxaline

The N4-oxide of the 5-(3-hydroxy-3-methylbutyl)-5-hydroxybenzo[f]quinoxalin-6(5H)-one was synthesized from beta-lapachone-quinoxaline by MCPBA oxidation and the crystal structure has been determined (C₁₇H₁₈N₂O₄), Mr=297.3, a=15.880(5), b=16.998(1), c=5.587(2) ?, V=1508.1(5) ?³, D _x=1.31, space group P2₁2₁2, Z=4, S=1.109 and R _obs=0.06. The central ring of the molecule is in a twisted-boat conformation and the molecular packing is done through two intermolecular hydrogen bonds O–H···O [2.072(6)] and [2.177(5) ?], forming columns along the direction parallel to the c-axis.     

Characterization of a crystal grown from Ocimum Basilicum leaves and branches

Leaves and branches of Ocimum Basilicum were dried, reduced to coarse powder and extracted in aqueous metanol and aqueous hexane. This paper discusses the X‐ray diffraction and FT‐Raman spectra measured at room temperature. The data obtained have been used to propose a general assignment of the vibrational fundamentals on the base of frequencies assigned in other related single crystals. From the results we can conclude that the crystal has a high symmetry. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Numerical modelling of the hydrodynamic field coupled to the transport of chemical species through the finite-element method

We describe the main features of a numerical simulator currently under development for studying water physico-chemical properties during the flooding of hydroelectric plants reservoirs. The work is sponsored by the brazilian Electric Energy National Agency ANEEL and conducted in a joint work of brazilian universities rearchers, with Furnas Centrais Elétricas S. A., the leading brazilian power utility company. An overview of the simulator requirements and of the involved partners is given. The software modules and engineering solutions are briefly discussed, including the finite element based transport module. Some results, future steps and partnerships are presented and discussed. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)