Tetronic acids and derivatives-IV: Synthesis and lactonization of -γ-acetoxy β-ketoesters

Through our investigation of synthetic routes to tetronic acids, elaboration and cyclization of γ-acetoxy-β-ketoesters were examined. Synthesis of these β-ketoesters 2 has been realized by selective monoacylation of the magnesioenolate of monoethyl malonate. Lactonization of 2 leading to tetronic acids or to 4-alkoxy-furan-2(5H)-ones is reported.     

V<Subscript>2</Subscript>O<Subscript>5</Subscript>-SiO<Subscript>2</Subscript> hybrid as anode material for aqueous rechargeable lithium batteries

V₂O₅-SiO₂ hybrid material was fabricated by heat-treating a mixture of H₂SiO₃ and V₂O₅. SEM, TEM, XRD, and N₂ isotherm analyses were performed to characterize the morphology and structure details of the as-prepared V₂O₅-SiO₂. The possibility of using the as-prepared V₂O₅-SiO₂ as anode material for aqueous lithium-ion batteries was investigated. Potentiostatic and galvanostatic results indicated that the intercalation/de-intercalation of Li⁺ in this material in aqueous electrolyte was quasi-reversible. It was also found that a discharge capacity of up to 199.1 mAh g^?1 was obtained at a current density of 50 mA g^?1 in aqueous solution of 1 M Li₂SO₄, a value which is much higher than the available reported capacities of vanadium (+5) oxides in aqueous electrolytes.     

Nano-sized Co/Co(OH)2 core-shell structure synthesized in molten salt as electrode materials for supercapacitors

Ionics - A facile and low cost molten salt method for the synthesis of Co@Co(OH)2 core-shell nanostructured material exhibiting high specific capacitances for supercapacitors was developed. In our...     

Electrochemical study of silver thiosulphate reduction in the absence and presence of ultrasound

The electrochemical reduction of silver thiosulphate was studied potentiostatically on platinum electrodes in the absence and presence of ultrasound (20 kHz). This system is irreversible and the reaction is both diffusion and kinetically controlled. The slowest step is the kinetic reaction especially the chemisorption of ions at the electrode surface. Ultrasound greatly improves the mass transport, which can be explained by changing from diffusion to mainly convection. This paper reports the effect of ultrasound upon electrode kinetic and mass-transport parameters at various RDE rotation speeds and ultrasonic intensities. It was found that the heterogeneous rate constant (kf) is improved in the presence of ultrasound due to the increase in the formal or standard heterogeneous rate constant (k0) (approximately by 10-fold under sonication).     

Etudes photochimiques—XIV : Photoreactions des methylisothiazoles

Photorearrangement of methylisothiazoles proceeds via a zwitterion and the amount of rearranged products increases with solvent polarity. When irradiated in the presence of primary amines, 3-methylisothiazole which is the less isomerised, and 5 methylisothiazole give charge transfer complexes. The amine cation radical is hydrolysed to an aldehyde. 4-Methyl isothiazole does not lead to a charge transfer complex.     

First experimental evidence of a new D4-AgCoO2 delafossite stacking

A new polytype of AgCoO(2) delafossite has been prepared from the ordered OP4-(Li/Na)CoO(2) layered compound using ion-exchange reaction in molten salts. As expected from the structural model assuming a topotactic process, the lamellar structure of this new polytype is an alternate combination of the already known 2H and 3R delafossite polytypes. It crystallizes in the P6(3)/mmc space group with cell parameters a(hex.) = 2.871(1) ? and c(hex.) = 24.448(1) ?. Thermal stability, morphology characterization, and electrical properties are reported here and compared with those of the 2H and 3R AgCoO(2) polytypes.     

A novel method for preparing PEMFC electrodes by the ultrasonic and sonoelectrochemical techniques

Novel ultrasonic and sonoelectrochemical methods for preparing Proton Exchange Membrane Fuel Cell (PEMFC) electrodes are described. Platinum loaded on Nafion-bonded carbon anodes in Membrane Electrode Assemblies (MEAs) were prepared in K₂PtCl₄ aqueous solutions by galvanostatic pulse electrodeposition in the absence and presence of power ultrasound (20 kHz). It was found that PEMFC electrodes prepared sonoelectrochemically showed better performance compared to those prepared by (i) galvanostatic pulse method only (i.e. silent conditions) and (ii) conventional method. Maximum power densities of 98.5 mW cm^?2 were found for anodes prepared sonoelectrochemically compared with 91.5 mW cm^?2 (by galvanostatic pulse method alone) and 86 mW cm^?2 (by conventional method).     

Sonoelectrochemical recovery of silver from photographic processing solutions

This paper describes the effect of ultrasound upon the electrochemical recovery of silver from photographic processing solutions using a newly designed electrochemical cell--SonoEcoCell. Rates of deposition of silver (obtained potentiostatically) were studied in the model 'fix' solutions (dilute aqueous Na2S2O3/NaHSO3 at a stainless steel cylinder electrode in both the absence and the presence of ultrasound. Under silent conditions, the magnitude of the cathodic potential is a major factor in the removal of silver. Under 20 kHz sonication, the rate of deposition of silver increases with increasing ultrasonic intensity. The cathode efficiency is also enhanced under insonation. The position of the ultrasonic probe with respect to the rotating cylinder electrode (RCE) was studied. It was found that for a 'face-on' geometry (probe parallel to the electrode) led to higher rate constants compared with a 'side-on' geometry (probe perpendicular to the electrode). The effect of coupling an RCE with ultrasound upon these rate constants employing the two geometry was also investigated. It was found that, employing either the face-on or the side-on geometry alone, improved rate constants were obtained below approximately 1500 and 2000 rpm, respectively.     

Nonisothermal crystallization behavior of poly(butylene adipate‐co‐terephthalate)/clay nano‐biocomposites

The study of the nonisothermal crystallization behavior of layered silicates micro‐ and nano‐biocomposites based on poly(butylene adipate‐co‐terephthalate) (PBAT), a biodegradable copolyester, has been carried out with different theoretical models. They were applied and developed with the aim to describe and better understand the influence of the layered silicates dispersion on crystallization. The nucleation efficiency of the layered silicates has been demonstrated with the use of the “Modified Avrami model,” thanks to the higher crystallization rate parameter, Z_c, and of the lower crystallization half‐time, t_1/2, compared to the neat matrix. The crystallization activation energies, E_a, calculated from “Kissinger's model” have shown that layered silicates have a negative effect on the crystallite growth process. Thus, these analyses have shown that layered silicates have a double effect on the crystallization process. These two opposites' phenomena depend on the dispersion quality and are more pronounced for the intercalated nano‐biocomposites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1503–1510, 2007     

Single-site- and single-atom-resolved measurement of correlation functions

Correlation functions play an important role for the theoretical and experimental characterization of many-body systems. In solid-state systems, they are usually determined through scattering experiments, whereas in cold gases systems, time-of-flight, and in situ absorption imaging are the standard observation techniques. However, none of these methods allow the in situ detection of spatially resolved correlation functions at the single-particle level. Here, we give a more detailed account of recent advances in the detection of correlation functions using in situ fluorescence imaging of ultracold bosonic atoms in an optical lattice. This method yields single-site- and single-atom-resolved images of the lattice gas in a single experimental run, thus gaining direct access to fluctuations in the many-body system. As a consequence, the detection of correlation functions between an arbitrary set of lattice sites is possible. This enables not only the detection of two-site correlation functions but also the evaluation of non-local correlations, which originate from an extended region of the system and are used for the characterization of quantum phases that do not possess (quasi-)long-range order in the traditional sense.