Synthesis, thermal, spectroscopic and magnetic studies of the Mn(SeO3).2H2O and Fe2(SeO3)3.3H2O selenites

Mn(SeO(3)).2H(2)O (1) and Fe(2)(SeO(3))(3).3H(2)O (2) have been synthesized by slow evaporation from an aqueous solution in the case of (1) and using mild hydrothermal conditions for (2). The crystal structures of both phases have been refined by the Rietveld method. The compounds crystallize in different spatial groups, the P2(1)/n monoclinic one with parameters a=6.649(1)A, b=6.542(1)A, c=10.890(1)A and beta=103.85(1) degrees being Z=4 for (1) and the R3c trigonal space group with parameters a=9.361(1)A, c=20.276(1)A and Z=6 for (2). The crystal structure of compound (1) consists of a three-dimensional framework formed by MnO(6) octahedra and (SeO(3))(2-) oxoanions with trigonal pyramidal geometry, which gives rise to Mn(2)O(10) dimers of edge-sharing octahedra. The crystal structure of phase (2) can be described as a three-dimensional framework formed by MnO(6) octahedra and (SeO(3))(2-) oxoanions with trigonal pyramidal geometry. In this phase the octahedral entities are linked along the three crystallographic axes through the selenite anions. Diffuse reflectance spectrum and luminescent measurements for (1) indicate the existence of Mn(2+) cations in a slightly distorted octahedral environment. Diffuse reflectance spectrum and M?ssbauer spectroscopy, in the paramagnetic region, for (2) show the existence of Fe(3+) cations in slightly distorted octahedral symmetry. ESR spectra of both compounds are isotropic with a g-value of 1.99(1) and 2.00(1), respectively. Magnetic measurements of both phases indicate an antiferromagnetic behavior. For phase (2), both, the ESR and magnetic measurements suggest a spin change from Fe(3+) (S=5/2) to Fe(2+) (S=2) at low temperatures.     

Crystal structures and cation ordering of Sr2AlSbO6 and Sr2CoSbO6

The two double perovskite oxides Sr₂AlSbO₆ and Sr₂CoSbO₆ were prepared and their structures studied with the X-ray powder diffraction method. At room temperature the crystal structure of Sr₂AlSbO₆ is cubic , with . It was found that depending on the preparation conditions, the Al³⁺ and Sb⁵⁺ cations can be either entirely or partially ordered. In the case of the partially ordered Sr₂AlSbO₆ sample, the extension of cation ordering was estimated from the -dependent broadening of the diffraction peaks and the results were interpreted as evidence of the formation of anti-phase domains in the material. Low-temperature Raman spectroscopic measurements demonstrated that the cubic phase of Sr₂AlSbO₆ is stable down to 79 K.The room-temperature crystal structure of Sr₂CoSbO₆ is trigonal (space group with and . At 470 K, however, the material undergoes a continuous phase transition and its structure is converted to cubic (space group . The studied Sr₂CoSbO₆ sample was partially ordered, but unlike Sr₂AlSbO₆, no indication of the formation of anti-phase domains was observed.     

Vinegar classification based on feature extraction and selection from headspace solid-phase microextraction/gas chromatography volatile analyses: a feasibility study

Headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography (GC) and multivariate data analysis were applied to classify different vinegar types (white and red, balsamic, sherry and cider vinegars) on the basis of their volatile composition. The collected chromatographic signals were analysed using the stepwise linear discriminant analysis (SLDA) method, thus simultaneously performing feature selection and classification. Several options, more or less restrictive according to the final number of considered categories, were explored in order to identify the one that afforded highest discrimination ability. The simplicity and effectiveness of the classification methodology proposed in the present study (all the samples were correctly classified and predicted by cross-validation) are promising and encourage the feasibility of using a similar strategy to evaluate the quality and origin of vinegar samples in a reliable, fast, reproducible and cost-efficient way in routine applications. The high quality results obtained were even more remarkable considering the reduced number of discriminant variables finally selected by the stepwise procedure. The use of only 14 peaks enabled differentiation between cider, balsamic, sherry and wine vinegars, whereas only 3 variables were selected to discriminate between red (RW) and white wine (WW) vinegars. The subsequent identification by gas chromatography-mass spectrometry (GC-MS) of the volatile compounds associated with the discriminant peaks selected in the classification process served to interpret their chemical significance.     

In situ-preparation and characterization of silver-HEMA/PEGDA hydrogel matrix nanocomposites: Silver inclusion studies into hydrogel matrix

Poly(ethylene glycol) diacrylate (PEGDA) of different molecular weights (Mn = 575 and 700) was used as crosslinking agent for the photopolymerization of 2-hydroxyethyl methacrylate (HEMA) in order to obtain HEMA/PEGDA-based hydrogels. Composites were synthesized in situ employing a new methodology that implies the addition of different quantities of silver nitrate aqueous solution to the monomer mixture with the finality to obtain hydrogels with different silver nanoparticles’ spatial density and distribution. Samples were characterized by thermal, optical, spectroscopic and structural/morphological methods. Thermal studies showed that the increase of PEGDA molecular weight and the AgNO₃ concentration in the reaction mixture enhance the glass transition temperature and the thermal stability of the composites. This behavior could be related to the silver coordination with the polymer network. Infrared spectroscopy with Fourier transform and Raman analyses were realized in order to corroborate the sample chemical structure by the identification of specific functional groups. Surface hydrogel morphology was visualized with scanning electron microscopy analysis, detecting a homogeneous micro-porous surface for the samples obtained from high molecular weight PEGDA. Presence of silver nanoparticles was established by X-ray fluorescence spectroscopy and UV/Vis methods. In this last case, the characteristic silver nanoparticle plasmon was observed. Using Transmission Electron Microscopy it was possible to visualize a homogeneous spatial distribution of spherical silver nanoparticles with very narrow diameter distribution that rounds about 14–21 ± 5 nm. In general, the silver nanoparticle presence in the compounds enhances considerably their thermal/morphological characteristics.     

Structural, thermal, spectroscopic, specific-heat, and magnetic studies of (C5H18N3)[Fe3(HPO3)6].3H2O: a new organically templated iron(III) phosphite with a pillared structure formed by the interpenetration of two subnets

A new open framework iron(III) phosphite with formula (C5H18N3)[Fe3(HPO3)6].3H2O has been prepared by hydrothermal synthesis with N-(2-aminoethyl)-1,3-propanediamine as a templating agent. The crystal structure was solved from single-crystal X-ray diffraction data in the trigonal space group R. The unit cell parameters are a= 8.803(1) A and c= 25.292(2) A with Z = 3. The complex pillared structure can be described as two interpenetrating subnets, one organic, [(C5H18N3).3H2O]3+, and one inorganic, [Fe3(HPO3)6]3-. In the inorganic subnet, the pillars are formed by FeO6 trimers linked by vertex sharing phosphite groups, while in the cationic subnet the organic molecules act like pillars. With increasing temperature, the flexibility of the structure allows contraction due to dehydration followed by thermal expansion before reaching the thermal stability limit. The Dq and Racah parameters calculated for (C5H18N3)[Fe3(HPO3)6].3H2O are Dq = 965, B = 1080, and C = 2472 cm(-1). M?ssbauer spectroscopy confirms the trivalent oxidation state of iron cations and the crystallographic multiplicities of their sites. The ESR spectra show isotropic signals with a g-value of 2.00(1). Specific-heat measurements show a three-dimensional (lambda-type) peak at a critical temperature Tc = 32 K. The value of the entropy at saturation is 46 J/mol K, very near the expected value of 44.7 J/mol K for the iron(III) cations with S = 5/2. Magnetic measurements indicate a three-dimensional antiferromagnetic ordering below 32 K and a reorientation of spins below 15 K with an incomplete cancellation of spins due to triangular interactions inherent to the structure.     

Fe2(AsO4)F: A new three-dimensional condensed fluoro-arsenate iron(II) compound with antiferromagnetic interactions

Fe₂(AsO₄)F has been synthesized under mild hydrothermal conditions in the form of single crystals. The compound crystallizes in C2/c monoclinic space group with the unit cell parameters a=13.214(1), b=6.623(1), and β=116.90(2)° with Z=8. The crystal structure consists of a three-dimensional framework constructed by two kinds of chains, A and B, with 50% of population. In the chains, the environments for the iron(II) cations show penta- and hexa-coordination. The chains establish an angle of approximately 120° between them. The disordered fluoride anions in these chains given rise to [Fe(1)O₄F(1)_0.5(F(2)_0.5)₂] and [Fe(2)O₄(F(1)_0.5)₂F(2)_0.5] edge-shared polyhedra in which the fluoride anions have occupancy factors of 50% over two distinct crystallographic sites. The IR spectrum shows the characteristic bands of the (AsO₄)³⁻ groups. From the diffuse reflectance spectrum a D_q parameter of 650 cm⁻¹ has been calculated for the Fe(II) d⁶ high spin cation. The Mössbauer spectrum in the paramagnetic state shows a doublet that has been fitted, according to the existence of two crystallographically independent iron environments, with two Lorentzian doublets. Magnetic measurements performed between room temperature and 5 K exhibit a maximum at 22.6 K, characteristic of antiferromagnetic interactions with a estimated “J”-exchange parameter of −1.2 K.     

Parametrization of the magnetic behavior of the triangular spin ladder chains organically templated: (C2N2H10)[M(HPO3)F3] (M(III) = Fe, Cr, and V). Crystal structure and thermal and spectroscopic properties of the iron(III) phase

A new iron(III) phosphite templated by ethylenediamine has been synthesized using solvothermal conditions under autogenous pressure. The (C2N2H10)[Fe(HPO3)F3] compound has been characterized by single-crystal X-ray diffraction data and spectroscopic and magnetic techniques. The crystal structure is formed by chains extended along the c axis and surrounded by ethylenediammonium cations. A study by diffuse-reflectance spectroscopy has been performed, and the calculated Dq, B, and C parameters for the Fe(III) cations are 1030, 720, and 3080 cm(-1), respectively. The M?ssbauer spectrum at room temperature is characteristic of Fe(III) ions. The electron spin resonance (ESR) spectra carried out at different temperatures show isotropic signals with a g value of 2.00(1). The thermal evolution of the intensity of the ESR signals indicates the existence of antiferromagnetic interactions for the Fe(III) phase. The magnetic susceptibility data of the Cr(III) and V(III) compounds show antiferromagnetic couplings. The J-exchange parameters of the Fe(III) and Cr(III) compounds have been calculated by using a model for a triangular spin ladder chain. The values are J1 = -1.63(1) K and J2 = -0.87(2) K with g = 2.02 for the Fe(III) phase and J(1) = -0.56(2) K and J2 = -0.40(2) K with g = 1.99 for the Cr(III) compound. In the case of the V(III) phase, the fit has been performed considering a linear chain with the magnetic parameters D = 2.5 cm(-1) and J = -1.15(1) K.     

Preferential sites for InAsP/InP quantum wire nucleation using molecular dynamics

In this paper, stress fields at the surface of the capping layer of self-assembled InAsP quantum wires grown on an InP (001) substrate have been determined from atomistic models using molecular dynamics and Stillinger-Weber potentials. To carry out these calculations, the quantum wire compositional distribution was extracted from previous works, where the As and P distributions were determined by electron energy loss spectroscopy and high-resolution aberration-corrected Z-contrast imaging. Preferential sites for the nucleation of wires on the surface of the capping layer were studied and compared with (i) previous simulations using finite element analysis to solve anisotropic elastic theory equations and (ii) experimentally measured locations of stacked wires. Preferential nucleation sites of stacked wires were determined by the maximum stress location at the MD model surface in good agreement with experimental results and those derived from finite element analysis. This indicates that MD simulations based on empirical potentials provide a suitable and flexible tool to study strain dependent atom processes.     

Validity and Reliability of the Reflux Symptom Index (RSI)

Laryngopharyngeal reflux (LPR) is present in up to 50% of patients with voice disorders. Currently, there is no validated instrument that documents symptom severity in LPR. We developed the reflux symptom index (RSI), a self-administered nine-item outcomes instrument for LPR. The purpose of this investigation was to evaluate the psychometric properties of the RSI. For validity assessment, 25 patients with LPR were evaluated prospectively before and six months after b.i.d. treatment with proton pump inhibitors (PPI). Each patient completed the RSI as well as the 30-item voice handicap index (VHI). For reliability assessment, the study patients were given the RSI on two separate occasions before the initiation of treatment. Normative RSI data were derived from 25 age-matched and gender-matched controls taken from an existing database of asymptomatic individuals without any evidence of LPR. The mean RSI (+/- standard deviation) of patients with LPR improved from 21.2 (+/- 10.7) to 12.8 (+/- 10.0), and the mean VHI improved from 52.2 (+/- 24.7) to 41.5 (+/- 25.0) after 6 months of therapy (p = 0.001 and 0.065, respectively). Of the three VHI subscales (emotional, physical, functional), only the functional subscale improved significantly (p = 0.037). Patients who experienced a five point or better improvement in RSI were 11 times more likely to experience a five-point improvement in VHI (95% confidence interval = 1.7, 76.8). For reliability assessment, the first and second pretreatment RSIs were 19.9 (+/- 11.1) and 20.9 (+/- 9.6), respectively (correlation coefficient = 0.81, p < 0.001). The single-item correlation coefficients ranged from 0.41 to 0.91 (p < 0.05 for all items). The mean pretreatment RSI in patients with LPR was significantly higher than controls (21.2 versus 11.6; p < 0.001). The mean RSI of patients with LPR after 6 months of PPI therapy approached that of asymptomatic controls (p > 0.05). The RSI is easily administered, highly reproducible, and exhibits excellent construct and criterion-based validity.     

Fibronectin: An Interesting Vocal Fold Protein

A great deal of information is accruing regarding the function of the extracellular matrix. Once thought to be simply a structural entity to surround cells, it is now known to do much more. Fibronectin in particular has received specific attention. Fibronectin is a ubiquitous glycoprotein found most abundantly in the extracellular matrix of regenerating, healing, and embryonic tissue. Vast evidence supports the fact that fibronectin participates in many diverse functions throughout the body that are relevant to vocal fold biology. This article introduces the structure of fibronectin and its isoforms and provides an introduction to some of the many functions it plays. It also reviews the evidence about fibronectin's place in vocal folds and vocal fold pathology. It discusses fibronectin's presence in vocal nodules, vocal polyps, vocal scarring, and Reinke's edema, and reviews the data on its role in mucosal wave impairment. Lastly, it discusses preliminary microarray data that show gene expression for fibronectin to be upregulated in true vocal folds when compared to false vocal folds.