Supplementation with Magnesium Salts—A Strategy to Increase Nutraceutical Value of Pleurotus djamor Fruiting Bodies

The use of substrates supplemented with minerals is a promising strategy for increasing the nutraceutical value of Pleurotus spp. The current research was performed to analyze the effect of substrate supplementation with magnesium (Mg) salts on the Mg content, biomass, and chemical composition of pink oyster mushroom (Pleurotus djamor) fruiting bodies. Before inoculation, substrate was supplemented with MgCl₂ × 6 H₂O and MgSO₄, both salts were applied at three concentrations: 210, 420, and 4200 mg of Mg per 2 kg of substrate. The harvest period included three flushes. Substrate supplementation with 4200 mg of Mg caused the most significant decrease in mushroom productivity, of about 28% for both Mg salts. The dry matter content in fruiting bodies was significantly lower in the treatment in which 210 mg of Mg was applied as MgSO₄ in comparison to the control. Supplementation effectively increased the Mg content in fruiting bodies of P. djamor by 19–85% depending on the treatment, and significantly affected the level of remaining bioelements and anions. One hundred grams of pink oyster fruiting bodies, supplemented with Mg salts, provides more than 20% of the Mg dietary value recommended by the Food and Drug Administration (FDA); thus, supplementation can be an effective technique for producing mushrooms that are rich in dietary Mg. Although P. djamor grown in supplemented substrate showed lower productivity, this was evident only in the fresh weight because the differences in dry weight were negligible. Mg supplementation increased the antioxidant activity of the fruiting bodies, phenolic compounds, and some amino acids, including L-tryptophan, and vitamins (thiamine and l-ascorbic acid).     

Gas-Phase Fragmentation of Oligoproline Peptide Ions Lacking Easily Mobilizable Protons

The fragmentation of peptides containing quaternary ammonium group, but lacking easily mobilizable protons, was examined with the aid of deuterium-labeled analogs and quantum-chemical modeling. The fragmentation of oligoproline containing quaternary ammonium group involves the mobilization of hydrogens localized at α- and γ- or δ-carbon atoms in the pyrrolidine ring of proline. The study of the dissociation pattern highlights the unusual proline residue behavior during MS/MS experiments of peptides.      

A study on adsorption of metals by activated carbon in a large-scale (municipal) process of surface water purification

Elements that enter the aquatic environment may pose a health risk to wildlife and humans. The aims of this study were: to determine how the introduction of activated carbon for a water purification system will improve the quality of the water produced; and to investigate the sorption of metals on activated carbons, including determination of the accumulation, as well as changes in concentrations of elements in carbons. The tests were carried out on three types of activated carbons with different granular structure. All samples were collected from Water Treatment Plant Goczalkowice, Poland. Concentrations of elements were measured using an optical emission spectrometer with inductively coupled plasma. The experiment showed that metals accumulating in the activated carbons during the operation included: Ca, Mn, Zn, and Cu. In each of the three types of carbons, it can distinguish such elements as Ba, Al, Cr, Ni, Ti, which are characterized by irregular accumulation during the operation of the filter. The introduction of carbon sorbent for water treatment largely contributed to improvement in the quality of raw material supplied to customers, mainly with regard to taste and smell, as well as to reduction of basic parameters: color, absorbance in the UV range and oxidability.      

Heme-protein active site models via self-assembly in water

[structure: see text] Water-soluble models of heme-protein active sites are obtained via the self-assembly of cationic porphyrins 1 and tetrasulfonato calix[4]arene 2 (K(1.2)() = 10(5) M(-)(1)). Selective binding of ligands either outside or inside the cavity of assemblies 1.2 via coordination to the zinc center has been observed. Small ligands such as 4-methylpyridine and 1-methylimidazole are encapsulated, while the bulkier caffeine is bound outside. Assemblies Co-1.2, in which the Zn porphyrin moiety has been replaced by a Co(II) porphyrin, can act as O(2) carriers.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

In-house quality control material of nicarbazin and narasin in eggs: preparation and inter-laboratory evaluation

Coccidiostats are a group of pharmacologically active substances widely used in veterinary practice. Their residues are detected relatively often in poultry tissues and egg samples analyzed as part of official residue control programs in the European Union. Therefore, accuracy of quantitative results needs to be monitored through internal and external quality control studies. In addition, the use of materials containing incurred residues would be welcome to for ongoing monitoring of the method accuracy. Unfortunately, in the field of veterinary drug residues, certified reference materials are often unavailable. Therefore, in-house quality control material of incurred lyophilized eggs containing narasin and nicarbazin has been produced and characterized. The eggs originated from hens receiving feed with coccidiostat premix Maxiban were mixed to obtain presumed concentrations of residues and freeze-dried. Homogeneity of the material was verified by the duplicate analysis of ten random samples, and the results proved that the between samples variation was negligible in comparison with the method repeatability. No measurable loss of analytes was observed within 1 year; the slope of the regression line of the results of stability measurements was not significantly different from zero. The assigned values were expressed as medians of the results of inter-laboratory comparison performed in four different European laboratories; the uncertainty of the material was estimated, taken into consideration all above tests, resulting in (14.4 ± 2.53) µg/kg for nicarbazin and (7.91 ± 1.52) µg/kg for narasin.     

Synthesis and characterisation of PEG-peptide surfaces for proteolytic enzyme detection

Peptide surfaces were obtained by the covalent immobilisation of fluorescently labelled pentapeptides carboxyfluorescein–glycine–arginine–methionine–leucine–glycine, either directly or through a poly(ethylene glycol) (PEG) linker on modified silicon wafers. Each step during the preparation of the peptide surfaces was confirmed by several surface characterisation techniques. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy were used to determine the surface composition, the wafers philicity was measured by contact angle and atomic force microscopy was used to investigate the surface morphology. Exposure of the peptide surfaces to trypsin resulted in the release of a fluorescently labelled peptide product, which allowed the kinetics of the enzymatic reaction to be followed with the aid of fluorescence spectroscopy. The electrospray ionisation mass spectrometry analysis of the post-digestion solution confirmed that the pentapeptides attached to the solid support undergo specific trypsin hydrolysis at the C-terminus of the arginine residues. Detailed surface analyses before and after the enzyme action was performed using ToF-SIMS. Because of the limited accessibility of the short peptide directly attached to the surface, a quantitative yield of enzymatic hydrolysis was observed only in case when the peptide was bound through the PEG linker. The insertion of the PEG linker increased the number of immobilised peptides and the rate of enzymatic digestion which consequently improved the quality of the enzyme assays. The described approach may be used for different peptide sequences designed for other proteases.

Detection of a ferroelastic phase transition in Csx(NH4)1−xLiSO4 with the use of the DSC method

In this paper the technology of producing solid solutions of Cs_x(NH₄)_1?xLiSO₄ using the slow evaporation method is presented. Appropriate conditions were chosen to grow large samples. The ammonium ion content in the solid solutions was determined using the Kjeldahl method. It was found that the real ammonium ion concentration is twice lower than the one applied in the initial substances. At room temperature, the base crystal, lithium cesium sulfate (CsLiSO₄), is paraelastic, whereas lithium ammonium sulfate (NH₄LiSO₄) is ferroelectric. It is expected that as a result of substituting Cs⁺ ions with $ N{\text{H}}_{4}^{ + } $ N H 4 + ions, instead of the Cs⁺ ions, the modification of the ferroic properties of solid solutions of Cs_x(NH₄)_1?xLiSO₄ will take place. Tests conducted with the use of the differential scanning calorimetry method (DSC) allowed the detection of the ferroelastic phase transition which takes place in these compounds. A gradual increase of temperature transition was observed from 202 K for the pure CsLiSO₄ to 203.8 K for Cs_0.90(NH₄)_0.10LiSO₄ and 230.1 K for Cs_0.85(NH₄)_0.15LiSO₄ with the increase of $ N{\text{H}}_{4}^{ + } $ N H 4 + ions concentration. Using polarized light microscopy, a ferroelastic domain structure was detected in the examined solid solutions, which appeared below the structural phase transition temperature.     

Mimicking photosynthesis in a computationally designed synthetic metalloprotein

While advances in protein design have made possible the construction of protein architectures with nativelike properties and predictable structures and function, there are as of yet no examples of functional, protein-based, solar energy conversion systems. This communication describes the design and characterization of an artificial reaction center (RC) protein that closely resembles the function of the natural photosynthetic RC. The synthetic protein, designed by the protein design program CORE, participates in multiple reduction/oxidation cycles with exogenous acceptors/donors following photoexcitation. The designed metalloprotein, aRC, consists of a tetrahelical bundle functionalized with two bis-histidine bound metal cofactors: a Ru(bpy)2 moiety and a heme group. Two distinct bis-histidine binding sites were engineered for each of these metal centers. Photoexcitation of aRC results in rapid ET from the RuII complex to the heme group (kET >/= 5 x 1010 s-1) yielding a long-lived (70 ns) charge-separated state (CSS), RuIII/FeII. This long-lived CSS participates in subsequent ET reactions with exogenous donors and acceptors in multiple photocycles, thus mimicking the basic function of native photosynthetic RCs. This study illustrates the successful design and construction of a protein-based functional charge separation device using a combination of automated computational protein design and knowledge of the engineering principles of biological electron tunneling extracted from natural electron-transfer systems. To our knowledge, this represents the first example of a functional protein-based artificial reaction center.