Development, optimisation and application of polyurethane foams as new polymeric phases for stir bar sorptive extraction

In this contribution, polyurethane foams are proposed as new polymeric phases for stir bar sorptive extraction (SBSE). Assays performed for polyurethane synthesis demonstrated that four series of formulations (P(1), P(2), P(3) and P(4)) present remarkable stability and excellent mechanical resistance to organic solvents. For polymer clean-up treatment, acetonitrile proved to be the best solvent under sonification, ensuring the reduction of the contamination and interferences. SBSE assays performed on these polyurethane polymers followed by liquid desorption and high-performance liquid chromatography-diode array detection (LD-HPLC-DAD) or large volume injection-capillary gas chromatography-mass spectrometry (LD-LVI-GC-MS), showed that P(2) presents the best recovery yields for atrazine, 2,3,4,5-tetrachlorophenol and fluorene, used as model compounds in water samples at a trace level. SBSE(P(2)) assays performed on this polymer mixed up with several adsorbent materials, i.e. activated carbon, a mesoporous material and a calixarene, did not bring any advantages in relation with the polymeric matrix alone. The comparison between assays performed by SBSE(P(2)) and by the conventional SBSE(PDMS) showed much better performance for the former phase on aqueous samples spiked with atrazine, 2,3,4,5-tetrachlorophenol and fluorene, in which the foremost two analytes present recovery values 3- and 10-fold higher, respectively. The polyurethanes proposed as new polymeric phases for SBSE provided powerful capabilities for the enrichment of organic compounds from aqueous matrices, showing to be indicated mainly in the case of the more polar analytes.     

A kinetic study of the conjugate addition of benzenethiol to cyclic enones catalyzed by a nonsymmetrical uranyl-salophen complex

The Et3N-assisted addition of benzenethiol to enones in chloroform is catalyzed with high turnover efficiency by the phenyl-substituted uranyl-salophen compound 3. Catalytic data show a close adherence to a quatermolecular mechanism involving reaction of a base-activated thiol with a reversibly formed complex of enone and metal catalyst, with a complication of product inhibition due to the formation of a product-catalyst complex. The role of the binding energy made available by interactions with the aromatic sidearm of the catalyst is discussed in terms of catalyst-substrate and catalyst-transition state complementarity.     

Enhanced flux pinning in pulsed laser deposited Y Ba2Cu3O7−δ : BaTiO3 nanocomposite thin films

The effect of incorporation of BaTiO₃(BTO) nanoparticles on the flux pinning properties of pulsed laser deposited YBCO:BTO thin films was studied. Substantial increase in the critical current density (J_C) and the pinning force density (F_p) of the nanocomposite thin films was observed. At 77 K, and zero applied magnetic field, the value of J_C for YBCO and YBCO:BTO (2%) thin films were 2.93 MA/cm² and 6.43 MA/cm², respectively. At the same temperature and an applied magnetic field of 4 T, the value of J_C increases from 3.6×10⁴ A/cm² for YBCO thin film to 2.7×10⁵ A/cm² for YBCO:BTO (2%) nanocomposite thin film. The study of temperature and field dependence of of YBCO and YBCO:BTO thin films indicates similar type of pinning. The lattice mismatch between YBCO and BTO seems to introduce more defects resulting in the improvement of flux pinning properties.     

Congruences and ideals on Boolean modules: a heterogeneous point of view

Definitions for heterogeneous congruences and heterogeneous ideals on a Boolean module $\mathcal {M}$ are given and the respective lattices $\mathrm{Cong}\mathcal {M}$ and $\mathrm{Ide}\mathcal {M}$ are presented. A characterization of the simple bijective Boolean modules is achieved differing from that given by Brink in a homogeneous approach. We construct the smallest and the greatest modular congruence having the same Boolean part. The same is established for modular ideals. The notions of kernel of a modular congruence and the congruence induced by a modular ideal are introduced to describe an isomorphism between $\mathrm{Cong}\mathcal {M}$ and $\mathrm{Ide}\mathcal {M}$. This isomorphism leads us to conclude that the class of the Boolean module is ideal determined.     

Cauchy matrix for linear almost periodic systems and some consequences

A novel method to construct the fundamental matrix for a linear almost periodic system is proposed, provided that the diagonal terms satisfy an average separation condition and the off-diagonal coefficients are L^∞-small. The idea is to transform the system in a set of Riccati type equations and use exponential dichotomy and its consequences. It is shown that the method yields easy computation procedures with simple and direct conditions depending on the coefficients. Finally, our result enables us to obtain: (i) explicit almost periodic matrices Q(t), Q⁻¹(t) and Q^′(t), which diagonalize the original system and (ii) sufficient conditions for the stability. Two illustrative examples are shown.     

Separation of acetins by counter-current chromatography

In this work we report the purification of a crude acetin mixture into mono‐, di‐ and triacetin by countercurrent chromatography. The process was initially tested on a small, semi‐preparative scale (0.5 g) to determine its efficiency. The process was then scaled up to accommodate 2.5 g of crude reaction products containing a mixture of the acetins. The solvent system ethyl acetate/n‐butanol/water 1:0.2:1 was used in all separation procedures. Mono‐, di‐ and triacetins were separated similarly in the semi‐preparative and preparative runs.     

Application of thermal analysis and pyrolysis coupled to GC/MS in the qualification of simvastatin pharmaceutical raw material

The simvastatin (SV) is nowadays produced semi-synthetically from lovastatin. It’s one of the statins most commonly used to treat several forms of hypercholesterolemia. This study aimed to apply the thermal characterization of the SV raw material using thermoanalytical techniques and its degradation products by Pyrolysis coupled to Gas chromatography/Mass spectrometry (Pyr-GC/MS). It was studied three samples of SV (SVA, SVB, and SVC). The results showed thermal behavior differences of the samples during the melting process transition and the activation energies (E _a) of the thermal decomposition, which were correlated to the thermal stability of them. The first decomposition step of Pyr-GC/MS showed two new compounds of m/z 284 and 207, in proportions dependents according to the pyrolysis temperature.     

Bismuth(III) reagents in steroid and terpene chemistry

Steroid and terpene chemistry still have a great impact on medicinal chemistry. Therefore, the development of new reactions or "greener" processes in this field is a contemporaneous issue. In this review, the use of bismuth(III) salts, as "ecofriendly" reagents/catalysts, on new chemical processes involving steroids and terpenes as substrates will be focused. Special attention will be given to some mechanistic considerations concerning selected reactions.     

Effect of the lectin of Bauhinia variegata and its recombinant isoform on surgically induced skin wounds in a murine model

Lectins are a structurally heterogeneous group of highly specific carbohydrate-binding proteins. Due to their great biotechnological potential, lectins are widely used in biomedical research. The purpose of the present study was to evaluate the healing potential of the lectin of Bauhinia variegata (nBVL) and its recombinant isoform (rBVL-1). Following surgical creation of dorsal skin wounds, seven groups of mice were submitted to topical treatment for 12 days with lectin, D-galactose, BSA and saline. The animals were anesthetized and euthanized on POD 2, 7 and 12 in order to evaluate the healing potential of each treatment. The parameters considered included wound size, contraction rate, epithelialization rate and histopathological findings. Wound closure was fastest in animals treated with rBVL-1 (POD 7). nBVL was more effective than the controls. All skin layers were reconstructed and keratin deposition increased. Our findings indicate that the lectin of Bauhinia variegata possesses pro-healing properties and may be employed in the treatment of acute skin wounds.     

Thermal characterization of raw material pentoxifylline using thermoanalytical techniques and Pyr-GC/MS

This work studied the thermal characterization of the pentoxifylline raw material through thermoanalytical techniques (TG, DSC, DSC-photovisual) and analysis of degradation products by Pyr-GC/MS. The picture obtained with DSC-photovisual showed the total vaporization of pentoxifylline at 230.0 °C. The TG dynamical curve presented only one step for the loss of mass evidencing to be a kinetic process of zero order reaction. The pyrograms obtained for pentoxifylline sample in the solid state and solution in the temperatures of 250.0, 300.0, and 400.0 °C, showed only one peak identifying the pentoxifylline.