A simple and very sensitive spectrophotometric method for the direct determination of copper ions

A sensitive spectrophotometric method for the direct determination of copper in aqueous samples without a preconcentration step has been developed. It is based on the formation of a yellow complex with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. The complex stoichiometry was 1:2 (Cu:dPKBH) and presents maximum absorbance at 370 nm. The influence of chemical variables affecting the behaviour of the system such as pH, concentration of dPKBH, buffer solution and ethanol, order of addition of the reagents and stability of the complex, were evaluated. The molar absorptivity (epsilon) was 3.92x10(4) L mol(-1) cm(-1), and Beer's law was obeyed up to 3 mg L(-1) of copper. The relative standard deviation was 0.46% (n=11) for a sample containing 1 mg L(-1) Cu(II). The limit of detection was 2.5 micro g L(-1) and was therefore more sensitive than the direct methods reported previously. Finally, the method was successfully validated by analysing several real samples with different matrices, such as tap water, natural water or copper alloys, with an average relative error of 2.46%.     

Multistep adsorption of anionic dyes on silica/chitosan hybrid. 1. Comparative kinetic data from liquid- and solid-phase models

In this work, a hybrid silica/chitosan was synthesized and characterized by nitrogen elemental analysis and thermal analysis (TG, DTG, DTA, and DSC) and BET surface area. The hybrid was used in adsorption studies of two anionic dyes from aqueous solutions. A rise of temperature accelerates mass transfer of dyes into the hybrid. However, the maximum adsorption capacities reach similar values from 25 to 55 degrees C. The kinetic data were first evaluated in relation to the decrease of the time-related residual concentration of the dyes in solution, where the second-order model has presented the best fitting. The solid-phase interaction of dye data presents a rough fitting to the traditional first-order Lagergren kinetic model. However, a modified Avrami kinetic equation was successfully fitted to the kinetic quantities, where from five to seven kinetic regions were found. A pore-diffusion model has also demonstrated that the diffusion is the rate-controlling interaction mechanism. However, the experimental-calculated comparative values are the best way to evaluate a specific aqueous- or solid-phase kinetic model.     

New designs for inhibitors of the NF-κB: DNA binding

We present a series of new inhibitors of the association between nuclear factor kappa B (NF-B) and the corresponding B site in DNA. They were designed using the lead compound 15-deoxy-^12,14 -prostaglandin J₂ (PGJ2), which is a natural product with demonstrated inhibitory efficiency for this system. First, the binding mode of PGJ2 to NF-B was unraveled by GOLD docking calculation. Subsequently, substitutions were made to PGJ2 to optimize its association with NF-B. Care was taken not to strongly increase the reactivity of the new compounds, and to keep the overall shape, size and hydrophilicity of the lead compound, which should render them a similar bioavailability. Molecular mechanics calculations were performed to decide on the suitability of the substitutions, and to evaluate the energies of association with NF-B. Density functional theory calculations were performed also to study the overall reactivity of the substituted drugs towards NF-B. Important general conclusions were obtained, concerning the improvement of these natural inhibitors; namely, a set of rational methodologies were deduced to improve the association between the PGJ2 derivatives and NF-B, and their efficiency demonstrated by generating a set of substituted complexes, some of them with a very much increased affinity for NF-B, opening new doors to enlarge the therapeutic capabilities of this class of drugs.     

Evaluation of the calibration errors on cooling of a differential scanning calorimeter using different sets of standard metals

The temperature calibration on cooling of thermal analysis instruments is important for the accurate study of the non-isothermal crystallization kinetics of semi-crystalline polymers. In previous works, a methodology was proposed for performing the calibration on cooling of differential scanning calorimeters (DSCs) with standard metals, and the calibration errors were checked using transitions of high-purity liquid crystals. In this work, alternative, physically meaningful, procedures for carrying out the calibration on cooling are analyzed and validated. The calibration errors are evaluated also with liquid crystalline transitions, when the calibration is performed with standard metals, in a wide temperature range, and when due account is taken for the need of isothermal corrections to the temperature measurements. It is shown that any pair of standard metals may be used to calibrate on cooling, that the calibration errors increase for wider working temperature ranges and that, providing that certain conditions are fulfilled, both calibration procedures yield similar results.     

Detection of soil pollution by hydrocarbons using headspace-mass spectrometry and identification of compounds by headspace-fast gas chromatography-mass spectrometry

The direct coupling of a headspace sampler with a mass spectrometer is proposed as a screening tool for the rapid detection of soil pollution by hydrocarbons from petroleum and derivatives. The samples are subjected to the headspace generation process, with no prior treatment, and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of the sample analysed. Suitable treatment of the signal by chemometric techniques allows unequivocal characterisation of the different types of sample. The use of fast gas chromatography with a mass spectrometer detector coupled to the headspace sampler allows identification of the major hydrocarbons present in the mineral and organic polluted samples, interpretation of the results obtained, and demonstrates the analytical potential of headspace-mass spectrometry coupling.     

Novel synthesis of sterically hindered N-substituted lactams from imides

An efficient and practical synthesis of sterically hindered N-substituted lactams has been developed starting from simple starting materials. The stereochemistry of the synthetically useful N,N acetal intermediate has been established.     

Energetics of hydroxybenzoic acids and of the corresponding carboxyphenoxyl radicals. Intramolecular hydrogen bonding in 2-hydroxybenzoic acid

The energetics of the phenolic O-H bond in the three hydroxybenzoic acid isomers and of the intramolecular hydrogen O-H- - -O-C bond in 2-hydroxybenzoic acid, 2-OHBA, were investigated by using a combination of experimental and theoretical methods. The standard molar enthalpies of formation of monoclinic 3- and 4-hydroxybenzoic acids, at 298.15 K, were determined as Delta(f)(3-OHBA, cr) = -593.9 +/- 2.0 kJ x mol(-1) and Delta(f)(4-OHBA, cr) = -597.2 +/- 1.4 kJ x mol(-1), by combustion calorimetry. Calvet drop-sublimation calorimetric measurements on monoclinic samples of 2-, 3-, and 4-OHBA, led to the following enthalpy of sublimation values at 298.15 K: Delta(sub)(2-OHBA) = 94.4 +/- 0.4 kJ x mol(-1), Delta(sub)(3-OHBA) = 118.3 +/- 1.1 kJ x mol(-1), and Delta(sub)(4-OHBA) = 117.0 +/- 0.5 kJ x mol(-1). From the obtained Delta(f)(cr) and Delta(sub) values and the previously reported enthalpy of formation of monoclinic 2-OHBA (-591.7 +/- 1.3 kJ x mol(-1)), it was possible to derive Delta(f)(2-OHBA, g) = -497.3 +/- 1.4 kJ x mol(-1), Delta(f)(3-OHBA, g) = -475.6 +/- 2.3 kJ x mol(-1), and Delta(f)(4-OHBA, cr) = -480.2 +/- 1.5 kJ x mol(-1). These values, together with the enthalpies of isodesmic and isogyric gas-phase reactions predicted by density functional theory (B3PW91/aug-cc-pVDZ, MPW1PW91/aug-cc-pVDZ, and MPW1PW91/aug-cc-pVTZ) and the CBS-QMPW1 methods, were used to derive the enthalpies of formation of the gaseous 2-, 3-, and 4-carboxyphenoxyl radicals as (2-HOOCC(6)H(4)O(*), g) = -322.5 +/- 3.0 kJ.mol(-1) Delta(f)(3-HOOCC(6)H(4)O(*), g) = -310.0 +/- 3.0 kJ x mol(-1), and Delta(f)(4-HOOCC(6)H(4)O(*), g) = -318.2 +/- 3.0 kJ x mol(-1). The O-H bond dissociation enthalpies in 2-OHBA, 3-OHBA, and 4-OHBA were 392.8 +/- 3.3, 383.6 +/- 3.8, and 380.0 +/- 3.4 kJ x mol(-1), respectively. Finally, by using the ortho-para method, it was found that the H- - -O intramolecular hydrogen bond in the 2-carboxyphenoxyl radical is 25.7 kJ x mol(-1), which is ca. 6-9 kJ x mol(-1) above the one estimated in its parent (2-OHBA), viz. 20.2 kJ x mol(-1) (theoretical) or 17.1 +/- 2.1 kJ x mol(-1) (experimental).     

Lanthanum chromites partially substituted by calcium,strontium and barium synthesized by urea combustion

Because of their electrical, magnetic and catalytic properties rare earth and transition metal mixed oxides are important compounds. Lanthanum chromites have been extensively used as solid oxide fuel cell (SOFC) interconnect materials. In this work, lanthanum chromites partially substituted by alkaline earth metals were synthesized by the urea combustion process. TG and DSC techniques were used to evaluate the presence of the organic material in the powder after reaction on the hot plate. The powders were calcinated at 900°C and characterized by XRD and SEM. The results show that the particles have nanometric dimensions and the perovskite structure was formed.     

Luminescent core-shell photonic crystals from poly(phenylene ethynylene) coated silica spheres

We describe the preparation and characterization of a photonic crystal filled with a luminescent conjugated polyelectrolyte, sulfonated poly(phenylene ethynylene). The conjugated polymer was coated onto the nanospheres by the layer-by-layer method and assembled directly into a fluorescent opal structure avoiding the defects associated with post-filling schemes. These structures exhibit strong angle-dependent luminescent properties. By using multiple layers, we further demonstrate control over the emissive bands of the opal.     

Prediction of the behaviour of organic pollutants using cloud point extraction

A preconcentration study based on the cloud point phenomenon was carried out for a set of triazine herbicides, three of them chloro-substituted and three of them methylthio-substituted. Concentration factors and recoveries were calculated as function of the percentage of the non-ionic surfactant Triton X-114 employed. From these values, obtained from a cloud point extraction (CPE) procedure, the distribution coefficient between the Triton X-114 micelles and water, Kc, prior to CPE was calculated for each triazine and related to the corresponding octanol-water partition coefficient, Kow. In order to confirm the results obtained with the triazine herbicides, two sets of data from chemically different organic pollutants--organophosporous and chlorophenols--obtained from the literature were assessed, concluding that they display a similar behaviour to that of the triazine herbicides. This can be used to predict the CPE behaviour of other organic pollutants from their octanol-water partition coefficients. The Kc values were compared with the analyte concentration ratio in the surfactant-rich phase and aqueous phase (Ksa) with a view to obtaining a link between the analyte behaviour prior to and after cloud point extraction procedures.