(4S)-4-羧基杂氮硅三环的合成

利用L-N,N-双(β-羟乙基)丝氨酸及L-N,N-双(β-羟乙基)苏氨酸与三乙氧基硅烷或氯烷基三乙氧基硅烷反应合成了具有手性的(4S)-4-羧基杂氮硅三环(1～5),并运用IR、~1HNMR、EI-MS等手段表征了结构。证据显示存在着贯穿笼状结构的N→Si配键。     

A Novel Organic—Inorganic Complex：Synthesis and Crystal Structure of [Ca（DMSO）5（H2O）]2 SiMo12O40

It is becoming a focus to synthesize and assemble organic-inorganic materials, especially, to synthesize charge-transfer complexes formed by polyoxometalate and organic donors. They have attracted much attention because such complexes are active in their electric, magnetic and optic properties1-4, many investigations about them have been done and some crystal structures of them were reported5-6. But, the disadvantage of these crystals is instability at room temperature. According to the view…     

二维网状铜(Ⅱ)配合物的合成及晶体结构表征

A Cu(Ⅱ) complex [Cu(L)_1.5(OSO₃)]·3H₂O (1) [L=1,4-bis(imidazol-1-yl)benzene] was synthesized by reaction of ligand L with CuSO₄·5H₂O using solvothermal method and its structure was determined by X-ray crystal structure analysis. The structure indicates that the complex crystallizes in triclinic, space group P1 with a=0.948 8(2), b=1.078 5(2), c=1.108 4(2) nm, α=74.820(2), β=81.331(2), γ=72.638(2)°, V=1.041 5(3) nm³, Z=2, D_calc=1.687 g·cm^-3, F(000)=544, μ=1.205 cm^-1, the final R=0.062 3 and wR=0.132 8. The Cu(Ⅱ) atom has distorted square-pyramidal environment with a N₃O₂ donor set. Each L ligand links two Cu(Ⅱ) atoms using its imidazole groups to form an infinite one-dimensional (1D) ladder-like chain, which further linked by SO₄^2- to form a two-dimensional (2D) network structure. The 2D sheets are further connected by C-H…O hydrogen bonds to give a three-dimensional (3D) structure. CCDC: 650388.     

氢氧化铝镁正电溶胶制备及性能研究

氢氧化铝镁正电溶胶制备及性能研究侯万国，张春光，孙德军，梁晓丽，王果庭（山东大学胶体与界面化学研究所，济南，２５０１００）关键词混合金属氢氧化物，溶胶，超细颗粒混合金属氢氧化物的合成、组成及结构等已得到广泛研究［１，２］．我们也曾用插入法合成了混合金...     

棒状钡铁氧体的反相微乳法制备

A rodlike barium ferrite precursor with an average size of 0.72～19.6 μm and aspect ratio of 2.6～8.3 has been successfully prepared in an inverse microemulsion consisting of isooctane, cetanyl trimethyl ammonium bromide (CTAB), n-C₄H₉OH and water with ammonia and ammonium oxalate as precipitants. On sintering at 780(C, the rodlike precursor particles could be transformed into rodlike particles of barium ferrite(BaFe₁₂O₁₉) with the average size and aspect ratio of 0.69～18.2 μm and 2.3～5.8, respectively. The effect of volume ratio of aqueous phase to oleic phase, the starting concentrations of metal ions and the starting concentration ratios of metal ions to precipitants were investigated.     

Preparation of AgBiVMoO/-Al2O3 Catalysts for the Partial Oxidation of Propane

A novel mixed sol method was developed for the preparation of supported catalysts. Analyses by means of XRD and BET show that a 40%AgBiVMoO/γ-Al2O3 catalyst prepared by this method possessed high specific surface area and high dispersion of the active phase. As a result, high acrylic acid selectivity of 8.5% was obtained when the catalyst was used in the reaction of propane partial oxidation to acrylic acid in a fixed-bed reactor.     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

GC-MS与GC-FTIR联合测定C9烃馏分组成

混合碳九组成复杂,估计为环状烯烃、芳烃、多环烃、烷烃等,目前该产品主要用于生产石油树脂。随着我国乙烯生产能力的不断扩大,其产量也在不断增加,为充分利用碳九资源,研究开拓其新的应用领域非常必要。而此研究的首要条件在于对其组成进行较为全面、准确地分析。传统的分析方法不能对其组成提供详尽的数据资料,直接影响了对碳九进行综合利用研究。GC-MS兼有GC的高效分离能力与MS很好的定性功能,且灵敏度较高,是分析有机混合物十分有效的手段。本文将GC-MS应用于碳九组成的定性分析中。但由于碳九组分中含有较多的同分异构体如三甲苯与二甲苯等,同分异构体的质谱图几乎相同,GC-MS对其不易鉴别,而红外(FTIR)对有机物同分异构体尤其苯系物的异构体具有非常好的鉴别能力。因此本文将GC-MS与GC-FTIR联合使用,对碳九组成进行定性分析,样品定量采用色谱氢火焰检测器峰面积归一化法得到的各组分峰面积相对百分含量,较好地解决了碳九组分的定性定量问题,为开发碳九新的应用领域提供依据。     

聚合物-金属纳米复合材料的制备与应用

综述了聚合物-金属纳米复合材料的制备方法，包括原位形成法、沉积法、离子注入法、辐射化学法、光照化学法、直接分散法、球磨法；介绍了聚合物．金属纳米复合材料的应用领域，最后展望了这种材料的发展前景。     

毛细管离子交换电色谱的分离行为

在离子交换毛细管色谱柱上实施电色谱，并对其分离行为进行了研究，采用７５μｍ（ｉ．ｄ．）２０ｃｍ的毛细管强阳离子交换柱（３μｍ）以ＮａＨ２ＰＯ４－Ｈ３ＰＯ４缓冲液为淋洗剂，紫外柱上检测（２１４ｎｍ）考察了流动相的ｐＨ值，有机改性剂及分离电压等因素对分离的影响，研究表明，不同的ｐＨ溶质的流出次序发生改变，随着有机改性剂含量增加，溶质的保留时间减小，而电渗流却增大，同时，对分离的柱效和方法的重现性进行了