Scheme for entanglement concentration of unknown W class states via linear optics

This paper proposes a scheme for entanglement concentration of unknown triparticle W class states with a certain probability. This protocol is mainly based on the coincidences of single-photon detectors and requires single-photon detectors and linear optical elements. The scheme is feasible within current technology.     

Photoresponse of the In0.3Ga0.7N metal-insulator-semiconductor photodetectors

In0.3Ga0.7N metal-insulator-semiconductor （MIS） and metal-semiconductor （MS） surface barrier photodetectors have been fabricated. The In0.3Ga0.7N epilayers were grown on sapphire by metalorganic chemical vapour deposition （MOCVD）. The photoresponse and reverse current-voltage characteristics of the In0.3Ga0.7N MIS and MS photodetectors were measured. A best zero bias responsivity of 0.18 A/W at 450 nm is obtained for the In0.3Ga0.7N MIS photodetector with 10 nm Si3N4 insulator layer, which is more than ten times higher than the In0.3Ga0.7N MS photodetector. The reason is attributed to the decrease of the interface states and increase of surface barrier height by the inserted insulator. The influence of the thickness of the Si3N4 insulator layer on the photoresponsivity of the MIS photodetector is also discussed.     

HL-2Aװ�ü��ⴵ��ϵͳ����

HL-2A装置激光吹气系统采用了全新自动控制的设计方法,实现了杂质注入量、靶片位移以及激光器被触发的时刻的精确自动控制.运行结果表明,该系统能把杂质的注入量控制在适当的水平,既不对等离子体约束产生影响,又便于光谱测量和杂质粒子输运研究.给出了激光吹气系统的设计,以及初步的实验结果.     

Photochemical Reactions of Carbohydrate Triflates

Abstract

The photochemical reactions of eight carbohydrate trifluoromethanesulfonates (triflates) have been investigated in methanol in the presence of potassium iodide. For those compounds which do not contain an aromatic chromophore, photolysis results in two types of reaction. One type produces deoxy sugars by replacement of the trifluoromethylsulfonyloxy (triflyloxy) group with a hydrogen atom. The second type of reaction generates partially protected sugars by replacement of the trifluoromethylsulfonyl (triflyl) group with a hydrogen atom. When the triflate being irradiated also has a protecting group containing an aromatic ring (i.e., benzyl, benzoyl, or p-tolylsulfonyl group), removal of the protecting group is the exclusive reaction pathway.     

Facile Assembly of Dispersed ZrMCM‐41 Nanoparticles Promoted in‐situ by Zirconium Salt

Mesoporous ZrMCM‐41 nanoparticles were synthesized by a usual way where tetraethyl‐orthosilicate (TEOS) and zirconium nitrate were used as the inorganic precursors. The obtained nanoscale ZrMCM‐41 was characterized by X‐ray diffraction, N₂ physis‐sorption, scanning electron microscopy and transmission electron microscopy. Characterization results revealed that zirconium salt added in the synthesis had a crucial effect on the assembly of nanoscale ZrMCM‐41 with relatively uniform particle size, which was rarely observed in reported studies for ZrMCM‐41 synthesized using the similar method. Meanwhile, the possible mechanism behind the synthesis was discussed based on the character of hydrolysis and condensation of TEOS and the mild acidic environment induced by the hydrolysable zirconium salt under aqueous conditions. Thus obtained nanoscale ZrMCM‐41 with developed pore structures may be advantageous to general applications in catalysis or adsorption host‐guest chemistry in terms of efficient mass transport of guest molecules.     

Low band gap copolymers consisting of porphyrins,thiophenes, and 2,1,3‐benzothiadiazole moieties for bulk heterojunction solar cells

Two novel low band gap conjugated copolymers containing porphyrins, thiophenes, and 2,1,3‐benzothiadiazole ( BTZ ) moieties were synthesized and applied in bulk heterojunction solar cells. The thermal, optical, electrochemical, and photovoltaic properties of the two copolymers were examined to investigate the effect of the introduction of BTZ moiety in the backbone of the porphyrin polymers. The copolymers exhibited good thermal stability and film‐forming ability. The absorption spectra indicated that the BTZ moiety has significant influence on the UV–visible region spectra of the copolymers: with increasing the molar amount of BTZ moieties in conjugated main chain, the absorption in the range of 450–700 nm is largely broadened and red‐shifted compared to the similar polymers without BTZ moiety, and the optical band gaps of copolymers were narrowed to ～1.50 eV. The photoluminescence spectra showed that there is effective charge transfer in the whole conjugated main chain. Cyclic voltammetry displayed that the band gaps were reduced effectively by the introduction of the BTZ moieties. The bulk heterojunction solar cells were fabricated based on the blend of the copolymers and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) in a 1:2 weight ratio. The maximum power conversion efficiency of 0.91% was obtained by using P2 as the electron donor under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Single electron transfer‐living radical polymerization of methyl methacrylate catalyzed by ytterbium powder

Zerovalent ytterbium (Yb) powder is firstly used as a catalyst in single electron transfer‐living radical polymerization of methyl methacrylate initiated by carbon tetrachloride in N, N‐dimethylformamide (DMF) and dimethyl sulfoxide, respectively. Polymerization proceeds in a “living”/controlled way as evidenced by kinetic studies and chain extension results, producing well‐defined polymers with controlled degree of polymerization and narrow molecular weight distribution. The apparent activation energy of polymerization in DMF is accounted to be 36.2 kJ/mol, and the energy of equilibrium state is calculated to be 13.9 kJ/mol. An increase in the concentration of Yb(0) yields a higher monomer conversion. It is observed that polymerization rate experiments a rapid increase in the presence of more polar solvent water, and increasing in the content of H₂O results in an increase in the apparent rate constant of polymerization, and a decrease in the molecular weight distribution. The reaction rate and molecular weight increase along with the decrease of DMF content. The effect of Yb(0) powder content, different ligands and concentration of initiator on the polymerization is also investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chiral crystal of a C2v‐symmetric 1,3‐diazaaulene derivative showing efficient optical second harmonic generation

Achiral nonlinear optical (NLO) chromophores 1,3‐diazaazulene derivatives, 2‐(4′‐aminophenyl)‐6‐nitro‐1,3‐diazaazulene (APNA) and 2‐(4′‐N,N‐diphenylaminophenyl)‐6‐nitro‐1,3‐diazaazulene (DPAPNA), were synthesized with high yield. Despite the moderate static first hyperpolarizabilities (β₀) for both APNA [(136 ± 5) × 10^?30 esu] and DPAPNA [(263 ± 20) × 10^?30 esu], only APNA crystal shows a powder efficiency of second harmonic generation (SHG) of 23 times that of urea. It is shown that the APNA crystallization driven cooperatively by the strong H‐bonding network and the dipolar electrostatic interactions falls into the noncentrosymmetric P2₁2₁2₁ space group, and that the helical supramolecular assembly is solely responsible for the efficient SHG response. To the contrary, the DPAPNA crystal with centrosymmetric P‐1 space group is packed with antiparalleling dimmers, and is therefore completely SHG‐inactive. 1,3‐Diazaazulene derivatives are suggested to be potent building blocks for SHG‐active chiral crystals, which are advantageous in high thermal stability, excellent near‐infrared transparency and high degree of designing flexibility. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Lactam Coupling as a Versatile Route to Indoprofen Analogs

A convergent synthesis of indoprofen via a Buchwald coupling approach is reported. Using this methodology, indoprofen and a set of analogs of indoprofen were readily prepared.