One-dimensional coordination polymers containing penta-supertetrahedral sulfide clusters linked by dipyridyl ligands

Three new one-dimensional coordination polymers [Zn8S(SC6H5)14.C12H10N2](1), [Zn7CoS(SC6H5)14.C13H14N2](2) and [Zn8S(SC6H5)14.C13H14N2](3) have been prepared containing penta-supertetrahedral clusters and linear crosslinking dipyridyl ligands; the two complexes show optical transitions with band gaps of approximately 3.44 eV (1) and approximately 3.54 eV (2).     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

Transient Spectroscopic Properties of [60] Fullerene—Containing Cyclic Sulphoxide

The properties of the triplet excited state of [60] fullerene-containing cyclic sulphoxide have been investigated by time-resolved absorption spectroscopy. Transient absorption bands of [60] fullerene-containing cyclic sulphoxide showed two decay-components, which wrer attributed to triplet excited states of different spin multiplicity. The properties of photoexcited states of [60] fullerene-containing cyclic sulphoxide are also reported.     

渗透蒸发脱盐的研究

将选择性透过膜和汽化相结合的分离过程是当前的研究热点,其中采用低热导率、疏水性多孔膜的过程称膜蒸馏,而采用非多孔性半透膜的过程则称渗透蒸发。将该分离过程用于盐水脱盐已有很多报道,并已建成中试设备,但采用的大多是膜蒸馏,所用膜的成本很高。本文研究制了一种价廉并带有致密层的非对称性含钠离子聚乙烯醇(PVA)-聚乙二醇(PEG)分离膜,并用该膜对渗透蒸发脱盐进行了初步研究。 1 实验 1.1 膜制备 将一定配比的PVA与PEG及钠盐水溶液在适当温度下混溶,加入适量醛类交联剂,数分钟后在选定的基材上流涎成膜,室温下自然晾干,再经35℃～50℃控温红外线干燥。 1.2 膜结构及脱盐流程 扫描电镜拍摄的膜断面形貌图像(图1)表明,该膜为非对称膜,表层厚约13μm,其中厚约2～3/μm的上表层为疏松结构,下表层为致密结构。将该类膜用于3.5％NaCl水溶液脱盐,运行4h后再漂洗、干燥作断面Na元素波谱线分析(图2)发现,在膜下层(右侧)厚约30μm层内检测不到Na元素。脱盐流程见文献。     

Phase Diagram and Properties of Glasses of the System Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-AgI

The phase diagram of the system Sb₂S₃-AgI was constructed from data of the differential thermal and X-ray phase analyses. The physicochemical properties of glassy and crystalline alloys were studied.     

An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.     

Two new compounds from Zingiber officinale

A new cyclic diarylheptanoid,1,5-epoxy-3-hydroxy-1-(3-methoxy-4,5-dihydroxyphenyl)-7-(4-hydroxyphenyl)-heptane (1),as well as a new monoterpene,10-O-β-D-glucopyranosyl-hydroxy cineole (2) were isolated from the rhizomes of Zingiber officinale. The structures of compounds 1 and 2 were established based on their spectral data.In addition,the antioxidant activities of these compounds were also measured.     

纳米TiO2的光生电荷迁移特性研究

利用场诱导光电压谱(简称FISPS)和瞬态光伏(简称TPV)技术研究了TiO₂的光生电荷的产生和传输机制.发现光生电荷在体块TiO₂上的迁移机制不同于在纳米TiO₂上的迁移机制，也不同于在结界面空间电荷区的迁移机制. 400 ℃处理的TiO₂颗粒表面具有大量的表面态，光生电荷被表面态捕获-释放机制控制着光伏行为的过程是慢过程. 800 ℃处理的TiO₂已经形成了完整的能带结构，光伏响应除了表现带-带跃迁外,还有一个在带边的自由激子带，光生电荷被表面自建场驱动进行传递的过程是快过程. 600 ℃处理的TiO₂混晶由锐钛矿型和金红石型两种构型组成，在两相之间存在着较低势垒的结界面．它的光伏响应受控于两种机制 ：光生电荷在两相间结界面空间电荷区的传输和在表面自建场驱动下的传输.当激发光强较小时，界面空间电荷区的光生电子由于积累的浓度较小而不能隧穿过结界面，这种场助隧穿只有在外场作用下才能发生.