WAXS studies on block copolymers of ethylene and propylene

Wide-angle X-ray scattering from presumed block copolymers of polypropylene (PP) and ethylene-propylene copolymer (EPR), i.e., PP-EPR and PP-EPR-PP, synthesized by sequential polymerization with δ-TiCl₃? Et₂AlCl, was examined and compared with WAXS of mechanical blends and chain-transfer mixtures of PP and EPR with comparable compositions. The peak at 2θ = 20° for both the copolymers and the mixtures was attributed to the γ modification of PP in EPR. A strong variation in the ratio of diffraction intensities I₀₄₀/I₁₁₀ of PP in block copolymers and mixtures was explained in terms of crystallite growth in different directions. Analysis of the patterns and calculation of crystallinity, crystallite size, and lattice parameters led to the conclusion that block structure existed in the prepared copolymers.     

Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

Preparation of AgBiVMoO/-Al2O3 Catalysts for the Partial Oxidation of Propane

A novel mixed sol method was developed for the preparation of supported catalysts. Analyses by means of XRD and BET show that a 40%AgBiVMoO/γ-Al2O3 catalyst prepared by this method possessed high specific surface area and high dispersion of the active phase. As a result, high acrylic acid selectivity of 8.5% was obtained when the catalyst was used in the reaction of propane partial oxidation to acrylic acid in a fixed-bed reactor.     

传感法研究固态钢中镧活度

本文采用LaF3单晶固体电解质测量了473～1223K温度范围内钢中镧的活度.两个平行样品的活度值符合很好,并且LaF3单晶的起始工作温度约为880K.     

Template synthesis in the nickel(II)–thiocarbohydrazide–propanone triple system

The complexing process proceeding in the Ni^II–thiocarbohydrazide (H₂N–H–NC(=S)–NH–NH₂)–propanone triple system in EtOH solution and nickel(II)hexacyanoferrate(II) gelatin-immobilized matrix has been studied. It has been found that in the first case, template synthesis leading, as a minimum, to formation of three coordination compounds of Ni^II with (N,N,S,S)-donor tetradentate ligands having NiL¹, NiL² and NiL³compositions where L¹ is 4,6,6-trimethyl-2,3,7,8-tetraazanonen-3-di(thiohydrazide)-1,9, L² is 4,6,6,12-tetrametyl-1,9-dithio-2,3,7,8,10,11-hexaazatridekadien-3,11-hydrazide-1 and L³ is 2,8,10,10,16-pentamethyl-5,13-dithio-3,4,6,7,11,12,14,15-octaazaheptadekatrien-2,7,15 is observed, whereas in the gelatin-immobilized matrix, a complexing process in the system considered does not occur.     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

LC–MS Determination and Pharmacokinetic Study of a Novel Sulfonylurea: Potential Hypoglycemic Agent in Rat Plasma

To support preclinical pharmacokinetic investigation of 1-[4-[2-(4-bromobenzene-sulfonaminoethyl)phenylsufonyl]-3-(trans-4-methylcyclohexyl)urea (G004), a rapid, sensitive and specific high-performance liquid chromatography–electrospray ionization mass spectrometry (LC–ESI-MS) method was developed and validated. Glibenclamide was employed as internal standard. After liquid–liquid extraction the analyte was analyzed on a Kromasil C₁₈ column (150 × 2.0 mm i.d.) with a mobile phase consisted of acetonitrile–water (0.05% acetic acid), 30:70 (v/v). The flow rate was 0.2 mL min⁻¹. Detection was performed on a quadrupole mass spectrometer using an electrospray ionization interface and the selected-ion monitoring (SIM) mode. The retention time was about 3.5 and 4.2 min for Glibenclamide and G004, respectively. The assay was linear over the concentration range of 2.0–500.0 ng mL⁻¹. Extraction Recovery of G004 in rat plasma was more than 87%. The intra- and inter-assay precision was lower than 11.5% (CV). This validated method was successfully applied to the pharmacokinetics of G004 in rats.