Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.     

X-ray diffraction study of some mesogenic copper, nickel and vanadyl complexes

We present a comparative study of various metallomesogenic complexes, using X-ray diffraction methods. For a given ligand linked to different metal atoms (Cu, Ni, VO), the nature of this central atom influences mainly the magnetic susceptibilities of the mesophases. With different ligands, which keep the close neighbourhood of the metal atom unchanged, the apparent length of the mesogenic unit is longer for short ligands than for longer ones. This unexpected behaviour is qualitatively well explained by taking into account the global shape of the different complexes.     

The prediction of coal properties using compressed infrared data from osculating polynomials

Reduction of the representation of infrared spectra from coal samples by osculating polynomials of degree nine is discussed. The reduced representation contains polynomial coefficients of order zero to four. Mathematical models of the original spectra are obtained by linear combination of the coefficients. These compressed models are statistically correlated to coal properties, namely, volatile matter, fixed carbon, ash content, heating value, hydrogen, carbon, sulphur, nitrogen, and maximum vitrinite reflectance, and the results are compared with those previously obtained from second derivatives of the same spectra. The use of compressed data, while giving slightly better correlations for some of the properties, has the advantage of requiring less computational time.     

Multicommuted fluorometric multiparameter sensor for simultaneous determination of naproxen and salicylic acid in biological fluids.

A combined approach based on solid-phase optosensing and multicommutation principles has been applied to develop a method for the simultaneous analysis of two pharmaceuticals (naproxen and salicylic acid) in biological fluids. The multicommuted flow-through optosensor was based on direct native fluorescence measurements of both analgesics using a non-polar sorbent (C18 silica gel) as a solid sensing zone. The flow system was controlled by Java-written home-made software and designed using three-way solenoid valves for an independent automated manipulation of sample and carrier solutions. Using an optimized sampling time, the method was calibrated in the range of 1 - 25 and 5 - 200 ng mL(-1). The obtained detection limits were 0.3 and 1.3 ng mL(-1) for naproxen and salicylic acid, respectively, with RSD (%) values of better than 2% for both analytes. The proposed methodology was successfully applied to urine, serum and pharmaceutical preparations. Recovery percentages ranging from 96.1 to 104% were obtained for both analytes.     

Consequences of magnetic aging for iron losses in electrical steels

Electrical steels, when submitted to operation, present continuous decrease of their magnetic properties, depending on the carbon content. This effect is attributed to the increase of the size of carbides, a process also known as coarsening or Ostwald Ripening. Loss separation can offer a better understanding of this phenomenon. Experimental results show that all effect of aging is inside the hysteresis loss component, with the excess losses unaffected. The carbon content in electrical steels should be less than 25 ppm to avoid magnetic aging.     

Vapor-particle partitioning of hydrocarbons in Western Mediterranean urban and marine atmospheres

An analytical procedure is described for a comprehensive determination of the composition of hydrocarbons in the atmosphere, based on: (a) aerosol filtration and subsequent adsorption of the vapor phase onto active charcoal and polyurethane foam; (b) GPC and HPLC fractionation of the extracts, and (c) analysis of the fractions by GC-MS under EI and NICI modes. Special emphasis is placed onn-alkanes, PAHs and their oxygenated derivatives.The characterization of samples collected in a coastal urban area (Barcelona city), and far away over the Western Mediterranean, at sea level and at 1100 m of altitude, revealed significant changes in the aerosol composition, mainly attributed to initial vapor-particle partitioning processes, influenced by ambient temperature variations, and to others taking place during long-range atmospheric transport, related with the different compound photoreactivities and with an unexplained source-decoupling phenomenon.     

Molybdenum(VI) and molybdenum(V) mononuclear and dinuclear complexes with 1,3-diphenyl-1,3-propanedione

Summary The synthesis and the dinuclear or mononuclear nature of several molybdenum(VI) and molybdenum(V) oxocomplexes derived from 1,3-diphenyl-1,3-propanedione (HLL) are described. These complexes were identified by i.r. and electronic spectra, magnetic susceptibility and analytical data, and are assigned the following formulae: [MoO₂(LL)₂], [Mo₂O₅(LL)₂], [Mo₂O₄(LL)₂], [MoOCl(LL)₂], [MoCl₂(LL)] and [MoO(OH)(LL)₂)]. The low magnetic moments of the dinuclear complexes are due, in part, to intramolecular interactions. The i.r. data show that the dionate is bound by two oxygen atoms forming a chelate six-membered ring.     

A convenient two-step synthesis of 6-methylenesubstituted-4-trichloromethyl-2-methylsulfanyl pyrimidines

This work reports a two-step synthetic strategy to obtain a series of 6-methylenesubstituted-4-trichloromethyl-2-methylsulfanylpyrimidines from the cyclization of 5-bromo-4-methoxy-1,1,1-trichloro-pent-3-en-2-ones with 2-methyl-2-pseudothiourea sulfate, followed by nucleophilic substitution of 6-bromomethyl-4-trichloromethyl-2-methylsulfanylpyrimidine with a series of nucleophiles. Alternative strategies to obtain 6-halomethyl-4-trichloro[fluoro]methyl-2-methylsulfanyl pyrimidines have been addressed.     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.