New film-forming poly(urethane-amide-imide) block copolymers: influence of soft block on membrane properties for the purification of a fuel octane enhancer by pervaporation

A new family of eight poly(urethane-amide-imide) (PUAI) block copolymers with the same hard block and different soft blocks were synthesized in two steps from a dianhydride monomer containing amide functions (4,4′-methylene-bis(trimellitic anhydride-N-phenylamide)) and α,ω-dihydroxy telechelic oligomers which varied in both chemical structure (polyethers: PEG, PTMG, PPG; polyester: PCL) and molar weight (MW ≅ 600 or 1000 g/mol). The PUAI were obtained in high yields (ranging from 81 to 98 wt%) and with reduced viscosities which varied from 0.36 to 0.84 dL/g (for C = 1 mg/mL in DMF at 25 °C). Their characterization by FTIR and ¹H NMR fully confirmed their chemical structure. Their solubility was typically limited to a few wt/vol% even in strong apolar diprotic solvents like DMF and NMP. This particular feature showed the very strong physical cross-linking of their very stiff hard block and enabled to cast membranes capable of withstanding exposure to many common organic solvents. Systematic permeability experiments showed that the PUAI membranes could be used to separate the azeotropic mixture EtOH (20 wt%)/ETBE very easily, with interesting prospects for the purification of ETBE (a fuel octane enhancer used instead of lead derivatives in the European Community). An analysis in terms of structure-property relationships pointed out that the soft block molar weight and polarity were two key parameters for the optimization of selective permeability. The best compromise was obtained with the soft block PEG1000. The corresponding polymer led to performances so far outstanding for polyamideimides with a very high flux of more than 1.1 kg/h m² for a normalized thickness of 5 μm at 50 °C and a selectivity α = 22.7 in the high range for this kind of separation.     

Spontaneous dissolution of a single-wall carbon nanotube salt

Upon reduction with alkali metals, single-wall carbon nanotubes (SWNTS) are shown to form polyelectrolyte salts that are soluble in polar organic solvents without any sonication, use of surfactants, or functionalization whatsoever, thus forming true thermodynamically stable solutions of naked SWNTs.     

Sur le role fondamental du cation alcalin dans les reductions par les hydrures metalliques. Utilisation de coordinats macrocycliques—III : Etude de divers groupements fonctionnels reduits par LiAlH4

The reactions of the following functional groups with LiAlH₄ in Et₂O or DME were studied: ketone, aldehyde, carboxylic acid, amide, ester, nitrile, oxime, tosylate, epoxide, acyl chloride and alkyl bromide. All these reductions are catalysed by Li⁺, as shown by the use of a specific macrocyclic ligand allowing the reaction to be run free of Li⁺. Moreover, in the cases of acyl chloride and alkyl bromide the reaction (free of Li⁺) is catalysed by AlX₃ which is generated in situ. Several new mechanistic features are revealed for reductions by LiAlH₄.     

Direct Clay-Catalyzed Friedel-Crafts Arylation and Chlorination of the Hydrocarbon Adamantane

Multiple chlorinations and arylations at the tertiary positions of adamantane are promoted by FeCl₃-doped K10 montmorillonite in CCl₄ or in aromatic solvents. The process, remarkably easy to implement, can be tailored to selective formation of monosubstituted 1-adamantyl derivatives or 1,3-disubstituted adamantanes. The process achieves alkylation at the meta- and para-positions of toluene leading to a purely statistical distribution and displays no substrate specificity in competition experiments between toluene and benzene.     

Kinetics of thermal decomposition of Co3O4 powder and single crystals

Kinetics of thermal decomposition in vacuum of Co₃O₄ powder as well as single crystals has been investigated. Discrepancies with the results of previous authors have been discussed. Decomposition of Co₃O₄ proceeds through formation of a compact layer of CoO and hence diffusion is the rate-limiting factor. The experimental curves α(t) be described for 0.05 < α < 0.85 using a modified Ginstling-Brounshtein equation: 1 ? 2α/3 ? (1 ? α)^2/3 = ktⁿ where the activation energy varies with the degree of decomposition.     

Fragmentation sous Impact Electronique du Phényl-2 Oxétanne

The mass spectral fragmentation processes of 2-phenyloxetane have been studied by means of isotopic labelling. The origin of the benzoyl ion, which is the base peak, is discused     

Biscarbene-ruthenium complexes in catalysis: novel stereoselective synthesis of (1E,3E)-1,4-disubstituted-1,3-dienes via head-to-head coupling of terminal alkynes and addition of carboxylic acids

The reaction of a variety of alkynes RCtbd1;CH with a variety of carboxylic acids R(1)CO(2)H, in the presence of 5% of RuCl(COD)C(5)Me(5), selectively leads to the dienylesters (1E,3E)-RCH(1)=CH(2)-CH(3)=C(R)(O(2)CR(1)). The reaction also applies to amino acid and dicarboxylic acid derivatives. It is shown that the first step of the reaction consists of the head-to-head alkyne coupling and of the formation of the metallacyclic biscarbene-ruthenium complex isolated for R = Ph and catalyzing the formation of dienylester. D-labeled reactions show that the alkyne protons remain at the alkyne terminal carbon atoms and carboxylic acid protonates the C(1) carbon atom. QM/MM (ONIOM) calculations, supporting a mixed Fischer-Schrock-type biscarbene complex, show that protonation occurs preferentially at the carbene carbon C(1) adjacent to Ru, in the relative cis position with respect to the Ru-Cl bond, to give a mixed C(1)alkyl-C(4)carbene complex in which the C(4) carbene is conjugated with the noncoordinated C(2)=C(3) double bond. This 16-electron intermediate has a weak stabilizing alpha agostic C-H bond. This most stable isomer appears to have a C(4) center more accessible to the nucleophilic addition which accounts for the experimentally observed product.     

Surface-tension-driven instabilities of a pure liquid layer evaporating into an inert gas

A theoretical model of the evaporation of a pure liquid layer is developed. We focus on the influence of an inert gaseous component, in addition to vapor, on surface-tension-driven Bénard instabilities. It is assumed that the gas phase is perfectly mixed at some distance from the liquid-gas interface (given composition, pressure, and temperature). If this distance is not much larger than the liquid layer thickness, it is shown that a reduction of the full two-layer problem to a one-layer problem is possible, provided the evaporation rate is not too large. An analytical expression is given for the corresponding dimensionless heat transfer coefficient (a generalized, wavenumber-dependent Biot number) at the evaporating interface. The approach is validated through a comparison with a direct numerical resolution of the full two-layer problem.     

An improved procedure for the conversion of indolines into indoles

The addition of a sacrificial enamine (such as indole), or of a vinyl ether (like dihydropyran) to an indoline during dehydrogenation by phenylseleninic anhydride dramatically improves the yield of the corresponding indole. This is due to scavenging of Se¹¹ phenylselenenating species.     

Favorskii-Reaktion von enolisierbaren Cyclobutanonen: Abhängigkeit der Stereoselektivität von der Abgangsgruppe,der Temperatur und dem Lösungsmittel

Dependence of the Stereoselectivity on the Leaving Group, the Temperature and the Solvent in the Favorskii-Reaction of Enolisable Cyclobutanones The base-induced contraction of enolisable 2-halocyclobutanones is often not stereoselectiv. The cis/trans-isomer ratio in the cyclopropanecarboxylic acid 9 derived from 2,4-cis-substituted cyclobutanones 7 depends on the nature of the leaving group. In addition, the choice of the base, the temperature and the solvent can profoundly affect the stereoselectivity of the Favorskii-reaction. The use of the p-bromophenylsulphonyloxy group as leaving group and an inhomogenous reaction medium leads exclusively to cis-carboxylic acid 9 .