An experimental and kinetic modeling study on the oxidation of 1,3-dioxolane

The modern catalytic or enzymatic advances allow the production of novel biofuel. Among them, 1,3-dioxolane can be produced from formaldehyde and ethylene glycol, both can be obtained from biomass. In this study, the oxidation of 1,3-dioxolane is studied at stoichiometric conditions. The ignition delay times of 1,3-dioxolane/O₂/inert mixtures were measured in a shock tube and in a rapid compression machine at pressures of 20 to 40 bar and temperatures ranging from 630 to 1300 K. The pressure profiles recorded in the rapid compression machine show a first stage of ignition enlightening the influence of the low temperature chemistry of combustion. Furthermore, mole fraction profiles of the stable intermediates produced during the oxidation of 1,3-dioxolane were measured in a jet-stirred reactor at 10 bar. Following these observations, a detailed kinetic model was developed with reaction rate coefficients and thermochemical data calculated by theoretical calculations or estimated by analogies to suitable molecules. In order to get an insight into the most important reaction pathways brute force sensitivity analysis and reaction pathway analysis were performed with the proposed model and discussed. It became clear that in the fuel-in-air case for the alkylhydroperoxide of 1,3-dioxolane the ring opening beta-scission pathway is favored against the further alkane-like second addition to molecular oxygen, which leads to a limited negative temperature coefficient.     

Vibrational spectroscopy,electrical characterization,nonlinear optical properties and DFT calculation of (NEt4)(H2AsO4)(H3AsO4)2

An organic-inorganic compound of tetraethylammonium dihydrogenarsenate bis(arsenic acid) salts of formula (NEt₄)(H₂AsO₄)(H₃AsO₄)₂, a potential new nonlinear optical material, was prepared by a slow evaporation technique and characterized by IR and Raman spectroscopy accomplished with DFT calculation and electrical-dielectrical measurements. The structure has been solved using direct method and refined by least-squares analysis. In this case, the structure consists of infinite parallel two-dimensional planes built of mutually H₂AsO₄^?, H₃AsO₄ tetrahedra connected by strong O–H?O hydrogen bonding giving birth to trimers. The geometry, first hyperpolarizability and harmonic vibrational wavenumbers were calculated by means of density functional theory (DFT) with the B3LYP/6-31G(d) level of theory. Good consistency was found between the calculated and the experimental structure, IR, and Raman results. The first hyperpolarizability β_tot of the title compound is about 1.75 times more than that of the reference crystal KDP. The complex impedance has been investigated in relation to the temperature and frequency ranges 297 and 373 K and 1 to 100 KHz, respectively. The conductivity temperature variation shows a typical Arrhenius-type behavior with a linear dependence on logarithm of conductivity. Transport properties in this material appear to be due to proton hopping mechanism.     

Confining effect on the bearing capacity of circular footings on a purely cohesive soilEffet du confinement sur la capacité portante d'une fondation circulaire sur un sol purement cohérent

The bearing capacity of axially symmetrical footings acting on a purely cohesive soil foundation contained by a rigid wall at a finite distance is investigated within the framework of the Yield design theory. Following the same tracks as in a preceding paper devoted to strip footings, the analysis is performed by referring to already existing results concerning the bearing capacity of a circular footing on a soil layer with limited thickness. It comes out that the bearing capacity factor determined by Eason and Shield for a rough circular footing on an unlimited soil foundation is increased by a correction factor that increases when the diameter of the container decreases. Comparison with the results obtained for strip footings acting on a purely cohesive soil in the same conditions shows that the confining effect is significantly lower for a circular footing than for a strip footing. To cite this article: J. Salençon, C. R. Mecanique 330 (2002) 521–525.     

Guanidinium Alkynesulfonates with Single‐Layer Stacking Motif: Interlayer Hydrogen Bonding Between Sulfonate Anions Changes the Orientation of the Organosulfonate R Group from “Alternate Side” to “Same Side”

Hydrolyses of HC?CSO₃SiMe₃ ( 1 ) and CH₃C?CSO₃SiMe₃ ( 2 ) lead to the formation of acetylenic sulfonic acids HC?CSO₃H?2.33 H₂O ( 3 ) and CH₃C?CSO₃H?1.88 H₂O ( 4 ). These acids were reacted with guanidinium carbonate to yield [⁺C(NH₂)₃][HC?CSO₃^?] ( 5 ) and [⁺C(NH₂)₃][CH₃C?CSO₃^?] ( 6 ). Compounds 1 – 6 were characterized by spectroscopic methods, and the X‐ray crystal structures of the guanidinium salts were determined. The X‐ray results of 5 show that the guanidinium cations and organosulfonate anions associate into 1D ribbons through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions, whereas association of these ions in 6 is achieved through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) and ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) interactions. The ribbons in 5 associate into 2D sheets through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{3\hfill \atop 6\hfill}}}$ (12) rings, whereas those in 6 are connected through ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) and ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{4\hfill \atop 6\hfill}}}$ (14) rings. Compound 6 exhibits a single‐layer stacking motif similar to that found in guanidinium alkane‐ and arenesulfonates, that is, the alkynyl groups alternate orientation from one ribbon to the next. The stacking motif in 5 is also single‐layer, but due to interlayer hydrogen bonding between sulfonate anions, the alkynyl groups of each sheet all point to the same side of the sheet.     

Cyclization and rearrangement reactions of a(n) fragment ions of protonated peptides

a(n) ions are frequently formed in collision-induced dissociation (CID) of protonated peptides in tandem mass spectrometry (MS/MS) based sequencing experiments. These ions have generally been assumed to exist as immonium derivatives (-HN(+)═CHR). Using a quadrupole ion trap mass spectrometer, MS/MS experiments have been performed and the structure of a(n) ions formed from oligoglycines was probed by infrared spectroscopy. The structure and isomerization reactions of the same ions were studied using density functional theory. Overall, theory and infrared spectroscopy provide compelling evidence that a(n) ions undergo cyclization and/or rearrangement reactions, and the resulting structure(s) observed under our experimental conditions depends on the size (n). The a(2) ion (GG sequence) undergoes cyclization to form a 5-membered ring isomer. The a(3) ion (GGG sequence) undergoes cyclization initiated by nucleophilic attack of the carbonyl oxygen of the N-terminal glycine residue on the carbon center of the C-terminal immonium group forming a 7-membered ring isomer. The barrier to this reaction is comparatively low at 10.5 kcal mol(-1), and the resulting cyclic isomer (-5.4 kcal mol(-1)) is more energetically favorable than the linear form. The a(4) ion with the GGGG sequence undergoes head-to-tail cyclization via nucleophilic attack of the N-terminal amino group on the carbon center of the C-terminal immonium ion, forming an 11-membered macroring which contains a secondary amine and three trans amide bonds. Then an intermolecular proton transfer isomerizes the initially formed secondary amine moiety (-CH(2)-NH(2)(+)-CH(2)-NH-CO-) to form a new -CH(2)-NH-CH(2)-NH(2)(+)-CO- form. This structure is readily cleaved at the -CH(2)-NH(2)(+)- bond, leading to opening of the macrocycle and formation of a rearranged linear isomer with the H(2)C═NH(+)-CH(2)- moiety at the N terminus and the -CO-NH(2) amide bond at the C terminus. This rearranged linear structure is much more energetically favorable (-14.0 kcal mol(-1)) than the initially formed imine-protonated linear a(4) ion structure. Furthermore, the barriers to these cyclization and ring-opening reactions are low (8-11 kcal mol(-1)), allowing facile formation of the rearranged linear species in the mass spectrometer. This finding is not limited to 'simple' glycine-containing systems, as evidenced by the IRMPD spectrum of the a(4) ion generated from protonated AAAAA, which shows a stronger tendency toward formation of the energetically favorable (-12.3 kcal mol(-1)) rearranged linear structure with the MeHC═NH(+)-CHMe- moiety at the N terminus and the -CO-NH(2) amide bond at the C terminus. Our results indicate that one needs to consider a complex variety of cyclization and rearrangement reactions in order to decipher the structure and fragmentation pathways of peptide a(n) ions. The implications this potentially has for peptide sequencing are also discussed.     

Development of a Xanthine Oxidase Modified Amperometric Electrode for the Determination of the Antioxidant Capacity

This paper describes the development of a xanthine oxidase/poly‐m‐phenylenediamine (XOD‐PPD)‐modified electrode. The biosensor was constructed by encapsulating XOD in a sol‐gel matrix deposited onto a platinum based screen‐printed electrode functionalized with a permselective PPD membrane. The hydrogen peroxide generated as a final product of the enzymatic reaction between the hypoxanthine and the XOD or by the spontaneous dismutation of superoxide radicals was selectively monitored at +700 mV. The use of a highly selective PPD layer blocked the nonspecific oxidation of other oxidizable molecules. Finally the biosensor was applied to the determination of the antioxidant capacity of acetylsalicylic acid.     

Comparative Study of the Determination of Parabens in Shampoos by Liquid Chromatography with Amperometric and Coulometric Detection

The simultaneous determination of four para‐hydroxybenzoic acid esters (parabens) in shampoos was studied by liquid chromatography (LC) with amperometric (LC‐AD) and coulometric (LC‐CD) detection. The parabens were separated on an ODS C18 reversed column by isocratic elution with a mobile phase based on methanol‐0.1 M acetic acid (60 : 40%, v/v) with 0.02 M NaClO₄ at a flow rate of 0.8 mL min^?1. The limit of detection (S/N>3) for the analytes was in the 15–25 pg (injected mass) range at an applied potential of 1.20 V vs. Ag/AgCl using the LC‐AD and in the 2–3 pg range at a potential of 0.790 V vs. Pd using the LC‐CD. The peak ratio of the internal standard peak (IS: 4‐hydroxybenzoic acid sec‐butyl ester) versus the analyte peak was found to be related to the amount injected from 0.1 ng to 100ng (r=0.996–0.999) with the LC‐AD and from 0.050 ng to 100 ng range (r=0.999–1.000) with the LC‐CD. The relative standard deviation (RSD, n=10) was comprised between 1.8 to 3.5% by LC‐AD ( 5 ng injected) and between 2.0 to 2.4% by LC‐CD (0.5 ng injected). The determination of four most used parabens in ten different shampoos was successfully realized.     

An Enhanced Process for the Production of a Highly Purified Extracellular Lipase in the Non-conventional Yeast <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

Yarrowia lipolytica LgX64.81 is a non-genetically modified mutant that was previously identified as a promising microorganism for extracellular lipase production. In this work, the development of a fed-batch process for the production of this enzyme in this strain was described. A lipolytic activity of 2,145 U/mL was obtained after 32 h of batch culture in a defined medium supplemented with 10 g/L of tryptone, an enhancer of lipase expression. To maximize the volumetric productivity, two different fed-batch strategies had been investigated. In comparison to batch process, the intermittent fed-batch strategy had not improved the volumetric lipase productivity. In contrast, the stepwise feeding strategy combined with uncoupled cell growth and lipase production phases resulted in a 2-fold increase in the volumetric lipase productivity, namely, the lipase activity reached 10,000 U/mL after 80 h of culture. Furthermore, this lipase was purified to homogeneity by anion exchange chromatography on MonoQ resin followed by gel filtration on Sephacryl S-100. This process resulted in an overall yield of 72% and a 3.5-fold increase of the specific lipase activity. The developed process offers a great potential for an economic production of Lip2 at large scale in Y. lipolytica LgX64.81.